HD/SD SDI Master Control Switcher DSC938
© 2016, DVLab http://www.dv-lab.com
Built in MultiView. The multiview output lets you see all 10 inputs of video, 2 video
players and 2 built-in still pictures on a single HDMI TV/monitor or SDI monitor! You can
see all of your cameras, tally indicators, graphics, preview and final program output all
on the same display at the same time. Also, the Multiview has indications of the input
and output analog and embedded SDI signals of the sound levels.
Menu (OSD) can be displayed on the Multiview also.
You can switch on and operate the menu (OSD) from the control panel.
The possibility of assigning the Multiview on any outputs of the switcher.
An additional HDMI output on which can be assigned any sources and Multiview.
Picture-in-Picture effect (PiP).
It is possible to enable the PIP’s preset, which is a combination of up to 4 windows
included in the background.
It is possible to change the following smaller windows settings:
size, crop, edging color, border width, location, sources for smaller windows and for
backgrounds).
All settings of the PIP’s presets are made and stored in the “Switcher Contol”program
from the PC.
4th PIP’s presets are written in the non-volatile memory of the switcher and saved
during restarts.
4th presets can be enabled on with the PIP1/PS1-PIP4/PS4 buttons.
It is possible to change the sources in the PIP’s windows from the control panel, and
quickly turn on or turn off the PIP’s windows either on the Preview or on the Program.
Two independent Chroma Key’s channels (with original automatic setting).
It is possible to overlay the PiP’s preset and Titles simultaneously on the video output
signal.
Two independent Logos.
1 Logo can be dinamic.
Total 8th logos can be uploaded from the PC in the switcher's non-volatile memory
and then to assign on independent buttons "Logo 1" and "Logo 2".
Each of the logos can be placed on the screen in an arbitrary place with the “Switcher
Contol” program from the PC .
Logo's can be changed from a PC and from console of the switcher.
1 Clock can be switch on/off with independent button.
