Digital Projection Titan Pro Series III Manual de usuario

Rev A May 2012

USER GUIDES

INSTALLATION AND QUICK-START GUIDE

CONNECTION GUIDE

OPERATING GUIDE

112-884A

Titan Pro series III

High Brightness Digital Video Projector

BOOK CONTENTS

About these Guides

Symbols used in these guides

Warnings

Notes

Product revision

Digital Projection Titan Pro series III ABOUT THESE GUIDES

Rev A May 2012

About these Guides

Please read this guide carefully before using the projector, and keep it handy for future reference.

A serial number is located on the back of the projector. Record it here:

Symbols used in these guides

Warnings

ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely

followed.

WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless

the instructions are closely followed.

Notes

NOTE: this symbol indicates that there is some important information that you should read.

Product revision

Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features

without prior notice. Projectors built prior to this revision of the Operating Guide may therefore not include all the features described.

Rev A May 2012

Titan Pro series III

High Brightness Digital Video Projector

INSTALLATION AND QUICK-START GUIDE

BOOK CONTENTS

INSTALLATION AND QUICK-

START GUIDE

What’s in the Box?

Getting to Know the Projector

Front and rear views

Control panel

Remote control

Connection panel indicators

Digital Projection Titan Pro series III CONTENTS Installation and Quick-Start Guide

Rev A May 2012

CONTENTS

What’s in the Box?...............................................................................Inst_1

Getting to Know the Projector....................................................Inst_2

Front and rear views .............................................................................Inst_2

Control panel .........................................................................................Inst_3

Remote control......................................................................................Inst_3

Connection panel indicators................................................................Inst_4

Positioning the Screen and Projector....................................Inst_5

Tilting the Projector ..............................................................................Inst_5

Chassis adjustment ..............................................................................Inst_5

Fitting and adjusting the optional Rigging Frame .............................Inst_6

Fitting ............................................................................................Inst_6

Stacking ........................................................................................Inst_6

Pitch, Roll and Yaw .......................................................................Inst_6

Redirecting the Air Outlet Duct............................................................Inst_7

Fitting the Lens .....................................................................................Inst_8

Lens Calibration ....................................................................................Inst_8

Operating the Projector...................................................................Inst_9

Switching the Projector On ..................................................................Inst_9

Selecting an Input Signal or Test Pattern ...........................................Inst_9

Input signal....................................................................................Inst_9

Test pattern ...................................................................................Inst_9

Adjusting the Lens..............................................................................Inst_10

Zoom...........................................................................................Inst_10

Focus ..........................................................................................Inst_10

Shift.............................................................................................Inst_10

Adjusting the Image............................................................................Inst_10

Orientation...................................................................................Inst_10

Control settings ...........................................................................Inst_10

Keystone .....................................................................................Inst_10

Picture.........................................................................................Inst_10

Switching the Projector Off................................................................ Inst_11

Digital Projection Titan Pro series III WHAT'S IN THE BOX? Installation and Quick-Start Guide

Page Inst_1Rev A May 2012

What’s in the Box? Notes

Make sure your box contains

everything listed. If any pieces are

missing, contact your dealer.

You should save the original box

and packing materials, in case you

ever need to ship your Projector.

The projector is shipped without a

lens.

Only one power cable - dependent

on the destination territory - will be

supplied with the projector.

Remote control

(105-023)

4x AAA batteries

User Guides on CD

(112-889) Important Information

(112-888)

Power cable, United Kingdom

(112-000)

Power cable, Europe

(112-001)

Power cable, North America

(112-002)

Projector

Remote cable

(102-162)

Digital Projection Titan Pro series III GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide

Page Inst_2Rev A May 2012

Getting to Know the Projector

Front and rear views

Notes

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Lens

Air outlet

duct

Top

air inlets

Side

Connection

panel

Mains

input

Control

panel

Adjustable

feet

Front

infra-red

window

Rear

infra-red window

Rear

Connection panel

Bottom

air inlets

Lens release

lever

Lens

motor

Digital Projection Titan Pro series III GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide

Page Inst_3Rev A May 2012

Notes

The projector uses the standard

Digital Projection infra-red remote

control.

Only the controls shown highlighted

are used on this projector.

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Each time a lens is fitted to

the projector, the calibration

procedure must be carried out.

(see the Fitting the Lens)

Control panel

The indicators on the control panel are as follows:

Power off = NO POWER

green = normal RUNNING mode amber = STANDBY mode

Shutter amber = CLOSED green = OPEN

Infra-red

reception

40°

Transmit

indicator

Remote

control

backlight

On/Off

Remote control

Power Shutter (RPY) Lens

calibration

See Fitting the

Lens.

controls

Input selection

1–10 selects Inputs 1 to 10

#selects Dual Pipe (inputs 9+10)

Image adjustment

Brightness, Contrast and Saturation

use and to adjust sliders

Lens controls

Digital Projection Titan Pro series III GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide

Page Inst_4Rev A May 2012

Connection panel indicators

The indicators on the rear connection panel are as follows:

All on = Power-On Self Test

Lamps 1,2 off = OFF

green = ON (100%) amber = 85-99% (on some models)

flashing green = WARM-UP flashing amber = COOL-DOWN

red (projector in standby) = Lamp Comms Error (call service)

red (projector on) = Ballast Comms Error (call service)

flashing red (projector in standby) = Lamp Error on previous operation

flashing red (projector on) = Lamp / Interlock Error

Error flashing = Fan / System Error steady = Voltage Error

IR blue flash = Remote control command received

Inputs The indicators next to the input connectors on both panels are as follows:

off = not selected

green = input selected, signal detected, and in range

flashing green = input selected, but signal not detected or out of range

Notes

For full details of how to use the

controls and the menu system, see

the Operating Guide.

For more information about

the connection panels, see the

Connection Guide.

Lamps

1 2

Error

Rear Connection Panel Side Connection Panel

Digital Projection Titan Pro series III POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide

Page Inst_5Rev A May 2012

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

Ensure that there is at least

30cm (12in) of space between the

ventilation outlets and any wall,

and 10cm (4in) on all other sides.

Do not place the projector with its

front panel down on a surface, as

this may damage the lens or the

lens release lever.

Positioning the Screen and Projector

Install the screen, ensuring that it is in the best position for viewing by your audience.

Position the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen.

Tilting the Projector

Do not tilt the projector more than is shown in the tilt diagrams, when in use, as this may cause serious lamp failure, damage the

lamp module and cause extra cost on replacement.

•

Chassis adjustment

If the projector is to be operated from a flat surface such as a projector table, then

adjustment of projector level should be made by turning the four feet under the chassis.

Set the adjustable feet so that the projector is level, and perpendicular to the sceen.

•

±10° ±10°

180°

±10°

180°

SX+ 660

1080p 660

WUXGA 660

SX+ 3D-P

1080p 3D-P

WUXGA 3D-P

SX+ 3D-L

1080p 3D-L

WUXGA 3D-L

Digital Projection Titan Pro series III POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide

Page Inst_6Rev A May 2012

Fitting and adjusting the optional Rigging Frame

Fitting

Remove the four adjustable feet.

Secure the rigging frame to the projector, as shown, making sure that the male frame

couplings are at the top. Secure each adaptor plate to the projector (three screws), and

secure each of the adjuster brackets to an adaptor plate (three screws).

Stacking

The projectors can be stacked on top of each other, or suspended below each other.

Carefully lower each projector down onto the top of the others, making sure that all four

frame couplings engage fully.

Fit a locking pin into each coupling. A ball in the end of the pin prevents the pin from

falling out – to insert or remove a locking pin, press the button on the end of the pin to

release the ball.

Pitch, Roll and Yaw

To adjust the pitch, turn either the front pair or the rear pair of vertical adjusters, taking

care to turn both adjusters by the same amount.

To adjust the roll, turn either the left pair or the right pair of vertical adjusters, taking care

to turn both adjusters by the same amount.

To adjust the yaw, turn the single horizontal adjuster at the front.

•

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

Do not place the projector with its

front panel down on a surface, as

this may damage the lens or the

lens release lever.

Do not stack more than 3

projectors.

Do not place heavy objects on top

of the projector chassis. Only the

chassis corners and the rigging

frame are capable of withstanding

the weight of another projector.

Backup safety chains or wires

should always be used with

ceiling mount installations.

Fixing

screws

(2 x 3)

Horizontal

adjuster

Vertical

adjusters

Frame

couplings

Pitch Roll Yaw

Locking

Tabla de contenidos

Otros manuales de Proyector de Digital Projection

Digital Projection

Digital Projection Titan series Manual de usuario

Digital Projection

Digital Projection TITAN WUXGA Quad 3D Manual de usuario

Digital Projection

Digital Projection Titan 930 Manual de usuario

Digital Projection

Digital Projection iVision 20 XL Manual de usuario

Digital Projection

Digital Projection HIGHlite Laser II 3D Series Manual de usuario

Digital Projection

Digital Projection FUSION Manual de usuario

Digital Projection

Digital Projection M-Vision 1080p-260 series Manual de usuario

Digital Projection

Digital Projection M-Vision 1080p-260 series Manual de usuario

Digital Projection

Digital Projection THUNDER 10000sx Manual de usuario

Digital Projection

Digital Projection 35HD-T Manual de usuario

Digital Projection

Digital Projection Titan 800 3D series Manual de usuario

Digital Projection

Digital Projection TITAN HD-600 Manual de usuario

Digital Projection

Digital Projection INSIGHT 4K Dual LED Series Manual de funcionamiento

Digital Projection

Digital Projection E-Vision Laser WQ120 Series Manual de usuario

Digital Projection

Digital Projection HIGHlite Laser II 3D Series Manual de funcionamiento

Digital Projection

Digital Projection TITAN Quad 1080p-3D Manual de usuario

Digital Projection

Digital Projection LIGHTNING 35HD Manual de usuario

Digital Projection

Digital Projection E-Vision Laser 6500 Series Manual de usuario

Digital Projection

Digital Projection dVision 1080p Manual de usuario

Digital Projection

Digital Projection M-Vision Laser 18K Series Manual de usuario

Digital Projection

Digital Projection E-Vision 6900 Series Manual de usuario

Digital Projection

Digital Projection SHOWlite 6000gv Manual de usuario

Digital Projection

Digital Projection E-Vision Laser 5000 Series Manual de usuario

Digital Projection

Digital Projection HIGHlite Laser 3D Series Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario