Digital Equipment Prioris HX MP Manual de usuario

Prioris HX MP Server

User's Guide

Part Number: ER-890WW-UA. A01

Digital Equipment Corporation

June 1995

The information in this document is subject to change without notice and should

not be construed as a commitment by Digital Equipment Corporation.

Digital Equipment Corporation assumes no responsibility for any errors that

might appear in this document.

The software, if any, described in this document is furnished under a license and

may be used or copied only in accordance with the terms of such license. No

responsibility is assumed for the use or reliability of software or equipment that is

not supplied by Digital Equipment Corporation or its affiliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is

subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in

Technical Data and Computer Software clause at DFARS 252.227-7013.

Prioris HX MP Server User's Guide

Adaptec is a registered trademark of Adaptec Corporation.

DEC, PRIORIS, and the Digital logo are trademarks of Digital Equipment Corporation.

Banyan and VINES are registered trademarks of Banyan System Inc.

Intel, OverDrive, and Pentium are registered trademarks of Intel Corporation.

Logitech is a trademark of LOGITECH, Inc.

Microsoft, MS-DOS, MS OS/2, and Windows for Workgroups are registered trademarks

of Microsoft Corporation.

NeXT is a registered trademark of NeXT, Inc.

Novell and NetWare are U.S. registered trademarks of Novell Inc.

OS/2 and PS/2 are registered trademarks of International Business Machines

Corporation.

PhoenixBIOS is a trademark of Phoenix Technologies Ltd.

QAPlus/FE is a registered trademark of DiagSoft, Inc.

SCO Unix is a trademark of The Santa Cruz Operation, Inc.

SIMM is a registered trademark of Wang Laboratories.

All other trademarks and registered trademarks are the property of their respective

holders.

FCC ID: A09-89XWW

The FCC wants you to know...

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

Any changes or modifications made to this equipment may void the user's

authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

•Consult the dealer or an experienced radio/TV technician for help

The user may find the following booklet prepared by the Federal Communications

Commission helpful: How to Identify and Resolve Radio-TV Interference

Problems. This booklet is available from the U.S. Government Printing Office,

Washington, D.C., 20402. Stock No. 004-00398-5.

All external cables connecting to this basic unit need to be shielded. For cables

connecting to option boards, see the option manual or installation instructions.

This digital apparatus does not exceed the Class B limits for radio noise emissions

set out in the radio interference regulations of the Canadian Department of

Communications.

This equipment is in the 2nd Class category (information equipment to be used in

a residential area or an adjacent area thereto) and conforms to the standards set by

the Voluntary Control Council For Interference by Data Processing Equipment

and Electronic Office Machines aimed at preventing radio interference in such

residential area.

When used near a radio or TV receiver, it may become the cause of radio

interference.

Read the instructions for correct handling.

This equipment meets or exceeds requirements for safety in the U.S. (UL 1950),

Canada (CSA C22.2 No. 950), and Europe (EN 60950/IEC 950) with Nordic

requirements.

This equipment meets or exceeds the ergonomic requirements of ZH1/618 and is

certified to bear the GS mark by TUV Rheinland of Germany.

This equipment has been tested for radio frequency emissions and has been

verified to meet VDE 0871 Class B.

Contents

About This Guide

Introduction.................................................................................................... vii

Audience ........................................................................................................ vii

Organization................................................................................................... vii

"Getting Started" Program .............................................................................. viii

Conventions.................................................................................................... x

Abbreviations ................................................................................................. xi

Special Notices............................................................................................... xii

Related Documentation................................................................................... xiii

Introduction

Supplied Diskettes and CD-ROM Disk ........................................................... 1-3

Startup and System Configuration Diskettes............................................. 1-3

CD-ROM Disk......................................................................................... 1-4

Diagnostic Software................................................................................. 1-4

Server Utilities and Technical Support............................................................ 1-4

Important Information..................................................................................... 1-5

Getting Help................................................................................................... 1-8

Configuring Your Server

Introduction.................................................................................................... 2-1

Configuring Expansion Boards ....................................................................... 2-2

BIOS Setup Options........................................................................................ 2-3

SCU Diskette(s).............................................................................................. 2-4

When to Run the SCU..................................................................................... 2-4

Before Using the SCU..................................................................................... 2-5

SCU Keyboard Function Keys ........................................................................ 2-6

Starting and Using the SCU............................................................................ 2-7

Configure Your Computer .............................................................................. 2-9

Step 1: Important EISA Configuration Information................................. 2-9

Contents

Step 2: Adding or Removing Expansion Boards...................................... 2-10

Adding ISA Expansion Boards................................................................. 2-10

Adding EISA Expansion Boards .............................................................. 2-11

Adding PCI Expansion Boards................................................................. 2-12

Relocating Expansion Boards................................................................... 2-14

Deleting Expansion Boards...................................................................... 2-15

Step 3: View or Edit Details............................................................................ 2-16

Step 4: Examine Required Switches................................................................ 2-17

Step 5: Save and Exit..................................................................................... 2-17

Setting the Date and Time............................................................................... 2-18

Maintain the SCU Diskette....................................................................... 2-19

SCU and Setup Options .................................................................................. 2-20

Main Menu Options................................................................................. 2-21

Advanced Options.................................................................................... 2-26

Security Options ...................................................................................... 2-30

CD-ROM Disk and Startup/Utility Diskette

Introduction.................................................................................................... 3-1

Before Using the Startup/Utility Diskette and CD-ROM Disk........................ 3-2

Accessing “Getting Started”............................................................................ 3-2

PHLASH.EXE......................................................................................... 3-3

Using EPP3SMC.EXE ............................................................................. 3-3

Loading Drivers.............................................................................................. 3-4

Expanding Your Server

Introduction.................................................................................................... 4-1

Tools Needed.................................................................................................. 4-2

Static Electricity............................................................................................. 4-2

Disconnect External Devices and Power......................................................... 4-3

Removing the Side Panels............................................................................... 4-4

Server Components (Left Side)....................................................................... 4-6

Server Components (Right Side)..................................................................... 4-8

Main Logic Board Components/Connectors.................................................... 4-10

CPU Module Components/Connectors............................................................ 4-12

Upgrading your CPU Module.......................................................................... 4-14

Installing a Secondary Cache Module............................................................. 4-16

Removing and Replacing the Terminator Card ............................................... 4-18

Removing and Replacing a Memory Module.................................................. 4-20

Contents

iii

Installing Additional Server Memory.............................................................. 4-22

Memory Configurations........................................................................... 4-24

For Single Memory Module Configurations ...................................... 4-24

For Dual Memory Module Configurations......................................... 4-25

Installing a SIMM........................................................................................... 4-25

Replacing the Battery/Real Time Clock (RTC)............................................... 4-28

Installing Expansion Boards............................................................................ 4-30

Adding Mass Storage Devices......................................................................... 4-34

SCSI Configuration Guidelines................................................................ 4-34

SCSI Configuration Utility....................................................................... 4-36

Installing a Half-Height 5¼-Inch Device into the Top-Right Drive Bay... 4-36

Installing a Full-Height 5¼-Inch Device into the Top-Right Drive Bay.... 4-38

Expansion Brackets........................................................................... 4-40

Installing or Replacing a Device Into the Hot-Swap Drive Bay............... 4-41

SBB LED Status Indicators............................................................... 4-43

Connecting SCSI Devices............................................................................... 4-44

Storage Backplane ................................................................................... 4-45

SCSI Drive IDs........................................................................................ 4-47

Single Channel SCSI and RAID Configuration ........................................ 4-48

Dual Channel SCSI Bus Configuration (One Internal Channel and

One External Channel)........................................................................... 4-50

Dual Channel SCSI Bus Configuration (Two Internal Channels).............. 4-53

3-Channel RAID Configuration (Two Internal Channels and

One External Channel)........................................................................... 4-56

3-Channel RAID Configuration (All Internal Channels)........................... 4-59

Using Multiple or Multi-Channel SCSI Host Adapters............................. 4-61

External SCSI Bus ................................................................................... 4-62

Connecting an External SCSI Storage Box...................................................... 4-64

External SCSI Bus Guidelines......................................................................... 4-64

Installing an Optional Power Supply............................................................... 4-66

Installing an Optional Cooling Fan ................................................................. 4-68

Installing the Side Covers............................................................................... 4-70

Contents

Problem Solving and Troubleshooting

Introduction.................................................................................................... 5-1

Initial Troubleshooting.................................................................................... 5-2

Server Troubleshooting................................................................................... 5-3

Disk Drive Troubleshooting............................................................................ 5-7

Monitor Troubleshooting................................................................................ 5-10

CD-ROM Troubleshooting.............................................................................. 5-12

Server Security Features

Introduction.................................................................................................... 6-1

Left and Right Door Security Lock................................................................. 6-2

Left and Right Side Panel Lock ...................................................................... 6-4

Supervisor and User Password ........................................................................ 6-6

If You Forget Your Password.......................................................................... 6-7

Additional Security Features........................................................................... 6-8

Technical Specifications

Introduction.................................................................................................... A-1

Server Specifications ...................................................................................... A-2

Performance Specifications...................................................................... A-2

Server Dimensions................................................................................... A-2

Environmental Specifications................................................................... A-3

CPU Specifications......................................................................................... A-4

EISA Expansion Slots..................................................................................... A-4

PCI Local Bus Expansion Slots....................................................................... A-4

Power Supply and Input Power Requirements................................................. A-4

Current Requirements..................................................................................... A-5

Power Cord Requirements .............................................................................. A-6

Main Logic Board Jumpers............................................................................. A-7

CPU Module Jumper Settings......................................................................... A-9

Contents

Server Messages

Introduction.................................................................................................... B-1

POST Messages.............................................................................................. B-1

POST and Boot Messages ........................................................................ B-2

POST Execution Messages ............................................................................. B-6

Beep Codes..................................................................................................... B-7

Device Mapping

Introduction.................................................................................................... C-1

CPU Memory Address Map ..................................................................... C-2

CPU I/O Address Map ............................................................................. C-2

I/O Address Map...................................................................................... C-3

Server Interrupt Levels............................................................................. C-4

DMA Channel Assignment ...................................................................... C-5

PCI Configuration Space Address Map.................................................... C-5

Figures

Typical Prioris HX MP Server .............................................................. xiv

1-1. Providing a Comfortable Working Environment................................... 1-7

2-1. SCU Main Menu Options...................................................................... 2-7

4-1. Unlocking and Removing the Side Panels............................................. 4-5

4-2. Server Components (Left Side, Single or Dual Configuration Shown) .. 4-7

4-3. Server Components (Right Side)........................................................... 4-9

4-4. Main Logic Board Components/Connectors.......................................... 4-11

4-5. CPU Module Components/Connectors.................................................. 4-13

4-6. CPU Module Removal.......................................................................... 4-15

4-7. Installing Cache Modules...................................................................... 4-17

4-8. Removing a Terminator Card................................................................ 4-19

4-9. Memory Module Removal.................................................................... 4-21

4-10. SIMM Socket Locations and Bank Designations................................... 4-23

4-11. Installing a SIMM................................................................................. 4-27

4-12. Replacing the Battery ........................................................................... 4-29

4-13. Prioris HX MP Server Expansion Board Slots....................................... 4-31

4-14. Removing a Metal Filler Plate .............................................................. 4-32

4-15. Installing an Expansion Board .............................................................. 4-33

4-16. Installing a Half-Height 5¼-Inch Device Into Top-Right Drive Bay ..... 4-37

Contents

4-17. Installing a Full-Height 5¼-Inch Device Into Top-Right Drive Bay...... 4-39

4-18. Installing Expansion Brackets............................................................... 4-40

4-19. Installing a Device Into the Hot-Swap Drive Bay.................................. 4-42

4-20. Storage Backplane................................................................................ 4-46

4-21. Single Channel SCSI and RAID Bus..................................................... 4-49

4-22. Dual Channel SCSI Bus Configuration (One Internal

Channel and One External Channel) .................................................... 4-52

4-23. Dual Channel SCSI Bus Configuration (Two Internal Channels)........... 4-55

4-24. 3-Channel RAID Bus (Two Internal Channels and

One External Channel)......................................................................... 4-58

4-25. 3-Channel RAID Bus (All Internal Channels) ....................................... 4-60

4-26. External SCSI Bus Connections............................................................ 4-63

4-27. Connecting an External SCSI Storage Box............................................ 4-65

4-28. Installing an Optional Power Supply..................................................... 4-67

4-29. Installing an Optional Fan..................................................................... 4-69

4-30. Installing Side Covers........................................................................... 4-70

6-1. Front Panel Security Doors Lock .......................................................... 6-3

6-2. Left and Right Side Panel Lock ............................................................ 6-5

A-1. Main Logic Board Jumper Locations .................................................... A-8

A-2. CPU Module Jumper Settings ............................................................... A-11

Otros manuales para Prioris HX MP

Tabla de contenidos

Otros manuales de Servidor de Digital Equipment

Digital Equipment

Digital Equipment Prioris MX 6200 Manual de usuario

Digital Equipment

Digital Equipment MicroVAX 3600 Manual de instrucciones

Digital Equipment

Digital Equipment MicroVAX II 630QB Manual de usuario

Digital Equipment

Digital Equipment DECserver 700 Manual de lista de piezas

Digital Equipment

Digital Equipment 7300 Manual de usuario

Digital Equipment

Digital Equipment Server 3100 series Manual de usuario

Digital Equipment

Digital Equipment AlphaServer 800 Manual de usuario

Digital Equipment

Digital Equipment 3220 Series Manual de usuario

Digital Equipment

Digital Equipment Prioris XL 6000 Series Manual de usuario

Digital Equipment

Digital Equipment DECserver 90M Manual de usuario

Digital Equipment

Digital Equipment MicroVAX II 630QB Manual de usuario

Digital Equipment

Digital Equipment DIGITAL Server 7100 1200 Manual de usuario

Digital Equipment

Digital Equipment 3220 Series Guía del usuario

Digital Equipment

Digital Equipment 7100R Series Manual de usuario

Digital Equipment

Digital Equipment 5200 Series Manual de usuario

Digital Equipment

Digital Equipment AlphaServer 1000 Guía de inicio rápido

Digital Equipment

Digital Equipment Prioris HX590 DP Manual de usuario

Digital Equipment

Digital Equipment DECmpp 12000/Sx 100 Manual de usuario

Digital Equipment

Digital Equipment DECserver 300 Hoja de instrucciones

Digital Equipment

Digital Equipment 5300 Manual de usuario

Digital Equipment

Digital Equipment DEC 4000 600 Series Instrucciones de funcionamiento originales

Digital Equipment

Digital Equipment Digital AlphaServer 400 Series Manual de operación

Digital Equipment

Digital Equipment Prioris XL 5166 Manual de usuario

Digital Equipment

Digital Equipment DEC 10000 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario