Digital Equipment DECpc AXP 150 Manual

DECpcAXP150and

DEC2000Model300AXP

CustomerTechnicalInformation

Order Number: EK-A0636-TM.001

July 1993

This manual describes how to use the system ﬁrmware and how to test,

troubleshoot, and upgrade the DECpc AXP 150 and DEC 2000 Model 300

AXP systems.

Revision Information: This is a new manual.

Digital Equipment Corporation

Maynard, Massachusetts

First Printing, July 1993

Possession, use, or copying of the software described in this documentation is

authorized only pursuant to a valid written license from Digital, an authorized,

sublicensor, or the identiﬁed licensor.

While Digital believes the information included in this publication is correct as

of the date of publication, it is subject to change without notice.

Digital Equipment Corporation makes no representations that the

interconnection of its products in the manner described in this document

will not infringe existing or future patent rights, nor do the descriptions

contained in this document imply the granting of licenses to make, use, or sell

equipment or software in accordance with the description.

The postpaid Reader’s Comments forms at the end of this document request

your critical evaluation to assist in preparing future documentation.

The following are trademarks of Digital Equipment Corporation: AXP, DEC,

DECchip, Digital, OpenVMS, RRD42, RX, RZ, VAX DOCUMENT, the AXP logo,

and the DIGITAL logo.

OSF and OSF/1 are registered trademarks of the Open Software Foundation,

Inc.

Microsoft is a registered trademark and Windows NT is a trademark of

Microsoft Corporation.

All other trademarks and registered trademarks are the property of their

respective holders.

This document was prepared using VAX DOCUMENT, Version 2.1.

Contents

Preface ..................................................... xxv

1 Using the System Firmware

Introduction . . . ................................... 1–1

In This Chapter ................................... 1–1

OpenVMS and OSF/1 Console Description .................. 1–2

Summary ........................................ 1–2

Environment Variables Affecting the Console . . .......... 1–2

OpenVMS and OSF/1 Console Uses . ................... 1–2

Entering the OpenVMS and OSF/1 Console .............. 1–3

Windows NT Firmware Description ....................... 1–4

Summary ........................................ 1–4

Environment Variables Affecting the Firmware . .......... 1–4

Windows NT Firmware Uses ......................... 1–5

Entering the Windows NT Firmware ................... 1–5

Switching from the OpenVMS and OSF/1 Console to the

Windows NT Firmware ................................ 1–6

Summary ........................................ 1–6

Switch Procedure .................................. 1–6

Switch Example ................................... 1–7

Switch Result . . ................................... 1–7

Switching from the Windows NT Firmware to the OpenVMS and

OSF/1 Console ....................................... 1–8

Summary ........................................ 1–8

Switch Procedure .................................. 1–8

Reboot Selection Menu . . . ........................... 1–9

Getting Help on the OpenVMS and OSF/1 Console . .......... 1–10

Summary ........................................ 1–10

OpenVMS and OSF/1 Console Help . ................... 1–10

HELP Command .................................. 1–10

HELP ADVANCED Command ........................ 1–11

HELP SET and HELP SHOW Commands ............... 1–11

iii

Getting Help on the Windows NT Firmware ................ 1–12

Summary ........................................ 1–12

Windows NT Firmware Help . ........................ 1–12

Displaying the Setup Menu Help Screen ................ 1–12

Setup Menu Example ............................... 1–13

Help Example .................................... 1–13

2 Using the Windows NT Firmware

Introduction ...................................... 2–1

In This Chapter . . . ................................ 2–1

Windows NT Firmware Introduction ...................... 2–2

Summary ........................................ 2–2

Boot Menu Functions ............................... 2–2

Supplementary Menu Functions ...................... 2–2

Setup Menu Functions .............................. 2–3

Key Functions .................................... 2–3

Accessing the Boot Menu ............................... 2–4

Summary ........................................ 2–4

Access Procedure . . ................................ 2–4

Boot Menu Example ................................ 2–4

Booting the Default Windows NT Boot Selection ............. 2–5

Summary ........................................ 2–5

Booting the Default Boot Selection .................... 2–5

If Errors Occur .................................... 2–5

Example . ........................................ 2–5

Booting an Alternative Windows NT Boot Selection . . . ....... 2–6

Summary ........................................ 2–6

Booting an Alternative Boot Selection . . ................ 2–6

If Errors Occur .................................... 2–6

Example 1 ....................................... 2–7

Example 2 ....................................... 2–7

Running a Program . . . ................................ 2–8

Summary ........................................ 2–8

Valid Programs . . . ................................ 2–8

Running a Program ................................ 2–8

Device Names .................................... 2–8

Path and Program Names . . . ........................ 2–9

Example . ........................................ 2–9

Accessing the Supplementary Menu....................... 2–10

Summary ........................................ 2–10

Accessing the Supplementary Menu.................... 2–10

Supplementary Menu Example ....................... 2–10

Updating the Firmware ................................ 2–11

Summary ........................................ 2–11

Important Safety Rules . . ........................... 2–11

Updating the Firmware . . ........................... 2–11

Alternative Method ................................ 2–12

Firmware Update Utility Example. . ................... 2–13

Accessing the Setup Menu . . . ........................... 2–14

Summary ........................................ 2–14

Accessing the Setup Menu ........................... 2–14

Identifying and Correcting Setup Errors ................ 2–14

Setup Menu Example ............................... 2–15

Listing Windows NT Firmware Device Names ............... 2–16

Summary ........................................ 2–16

Listing the Device Names ........................... 2–16

Windows NT Firmware Device Names .................. 2–16

Available Hardware Devices Display ................... 2–17

Setting the System Date and Time from the Windows NT

Firmware ........................................... 2–18

Summary ........................................ 2–18

Setting the Date and Time ........................... 2–18

Set System Time Example ........................... 2–19

Setting the Default System Partition . . . ................... 2–20

Summary ........................................ 2–20

System Partition Deﬁnition .......................... 2–20

Setting the System Partition ......................... 2–20

Default System Partition Example. . ................... 2–21

Effects of This Procedure . ........................... 2–21

Conﬁguring the System Diskette Drives ................... 2–22

Summary ........................................ 2–22

Conﬁguring the System Diskette Drives ................ 2–22

Diskette Drive Conﬁguration Example ................. 2–23

Effects of This Procedure . ........................... 2–23

Setting the System to Boot Automatically .................. 2–24

Summary ........................................ 2–24

Setting the System to Boot Automatically ............... 2–24

Setup Autoboot Example . ........................... 2–25

Effects of This Procedure . ........................... 2–25

Editing the System Environment Variables ................. 2–26

Summary ........................................ 2–26

Important Information . . . ........................... 2–26

Editing Environment Variables ....................... 2–26

Edit Environment Variables Example .................. 2–27

Effects of This Procedure . ........................... 2–27

Default Windows NT Firmware Environment Variables ....... 2–28

Summary ........................................ 2–28

Important Information .............................. 2–28

Default Environment Variables ....................... 2–28

Other Environment Variables ........................ 2–29

Resetting the System to Factory Defaults . . ................ 2–30

Summary ........................................ 2–30

Resetting to Factory Defaults. ........................ 2–30

Effects of This Procedure ............................ 2–30

Saving the System Set-Up or Quitting the Setup Menu. ....... 2–31

Summary ........................................ 2–31

Saving the System Set-Up . . . ........................ 2–31

Quitting the Setup Menu ............................ 2–31

Other Setup Menu Functions ............................ 2–32

Summary ........................................ 2–32

Managing Boot Selections . . . ........................ 2–32

Running the ECU . ................................ 2–32

3 Managing Windows NT Boot Selections

Introduction ...................................... 3–1

In This Chapter . . . ................................ 3–1

Accessing the Boot Selections Menu....................... 3–2

Summary ........................................ 3–2

Accessing the Boot Selections Menu.................... 3–2

Boot Selections Menu Example ....................... 3–2

Information on Boot Selection Variables . . . ................ 3–3

Summary ........................................ 3–3

Boot Selection Variables ............................. 3–3

Adding a Boot Selection ................................ 3–4

Summary ........................................ 3–4

Adding a Boot Selection ............................. 3–4

Example . ........................................ 3–5

Checking the Boot Selections for Errors.................... 3–6

Summary ........................................ 3–6

Errors in Boot Selections ............................ 3–6

Checking the Boot Selections . ........................ 3–6

Example . ........................................ 3–7

Changing a Boot Selection .............................. 3–8

Summary ........................................ 3–8

Changing a Boot Selection . . . ........................ 3–8

Example . ........................................ 3–9

Displaying the System Boot Selections .................... 3–10

Summary ........................................ 3–10

Displaying the System Boot Selections ................. 3–10

Example ......................................... 3–11

Changing the Default Boot Selection . . . ................... 3–12

Summary ........................................ 3–12

Default Boot Selection Deﬁnition . . . ................... 3–12

Changing the Default Boot Selection ................... 3–12

Example ......................................... 3–13

Deleting a Boot Selection ............................... 3–14

Summary ........................................ 3–14

Deleting a Boot Selection . ........................... 3–14

Example ......................................... 3–14

4 Using the EISA Conﬁguration Utility

Introduction . . . ................................... 4–1

In This Chapter ................................... 4–1

EISA Conﬁguration Utility Overview . . . ................... 4–2

Summary ........................................ 4–2

Function of the ECU ............................... 4–2

Conﬁguration Files ................................ 4–2

Copying the Conﬁguration Diskette . ................... 4–2

Getting Help . . ................................... 4–3

Automatic Help Screens . . ........................... 4–3

Help Menu ....................................... 4–3

Important Information . . . ........................... 4–3

Running the ECU . ................................... 4–4

Summary ........................................ 4–4

Running the ECU from a Diskette . . ................... 4–4

Running the ECU from Another Location ............... 4–5

Quick Conﬁguration ................................... 4–6

Summary ........................................ 4–6

When to Use This Procedure ......................... 4–6

Quick Conﬁguration Procedure ....................... 4–6

Conﬁguring an EISA Option . ........................... 4–7

Summary ........................................ 4–7

Conﬁguration Procedure . ........................... 4–7

Conﬁguring an ISA Option. . . ........................... 4–10

Summary ........................................ 4–10

Important Information . . . ........................... 4–10

Conﬁguration Procedure . ........................... 4–11

Using the Generic ISA Conﬁguration File .................. 4–14

Summary ........................................ 4–14

vii

Generic ISA Conﬁguration Procedure . . ................ 4–14

Moving an EISA Option Board to Another Slot .............. 4–17

Summary ........................................ 4–17

Moving an EISA Option Board........................ 4–17

Moving an ISA Option Board to Another Slot ............... 4–18

Summary ........................................ 4–18

Moving an ISA Option Board . ........................ 4–18

Removing an Option Board ............................. 4–19

Summary ........................................ 4–19

Removing an Option Board . . ........................ 4–19

Changing Board Function and Resource Settings ............ 4–20

Summary ........................................ 4–20

Function and Resource Settings ....................... 4–20

Changing Function and Resource Settings ............... 4–21

Advanced ECU Features ............................... 4–22

Summary ........................................ 4–22

Accessing the Advanced Menu ........................ 4–22

Advanced Features. ................................ 4–22

Resolving a Conﬂict in the Conﬁguration . . . ................ 4–24

Summary ........................................ 4–24

Causes of Conﬁguration Conﬂicts ..................... 4–24

Detecting Conﬂicts . ................................ 4–24

Resolving the Conﬂict .............................. 4–24

5 Using the OpenVMS and OSF/1 Console

Introduction ...................................... 5–1

In This Chapter . . . ................................ 5–1

Displaying the OpenVMS and OSF/1 System Device Display . . . 5–2

Summary ........................................ 5–2

Displaying the System Device Display . . ................ 5–2

Using the System Device Display...................... 5–2

Identifying the Boot Devices . ........................ 5–2

System Device Display .............................. 5–3

Displaying the OpenVMS and OSF/1 System Device Display,

continued ........................................... 5–4

Displaying System Device Information . ................ 5–4

System Device Display .............................. 5–5

Displaying the System Conﬁguration ...................... 5–6

Summary ........................................ 5–6

Displaying the System Device Display . . ................ 5–6

Using the System Conﬁguration Display ................ 5–6

Interpreting the Display ............................ 5–6

viii

SHOW CONFIG Display . ........................... 5–7

Setting the Default Boot Device for OpenVMS and OSF/1 ...... 5–8

Summary ........................................ 5–8

Valid Settings . . ................................... 5–8

Setting the Default Boot Device ....................... 5–8

Important Information . . . ........................... 5–9

Default Boot Device Example......................... 5–9

Setting the Default Boot Flags for OpenVMS and OSF/1....... 5–10

Summary ........................................ 5–10

OpenVMS and OSF/1 Boot Flags . . . ................... 5–10

Setting the Default Boot Flags ........................ 5–10

Important Information . . . ........................... 5–10

Default Boot Flags Example ......................... 5–11

Setting the Default Startup Action ....................... 5–12

Summary ........................................ 5–12

Startup Action Values . . . ........................... 5–12

Setting the Startup Action ........................... 5–13

Default Startup Action Example . . . ................... 5–13

Setting the Default Keyboard Language (DECpc AXP 150

Systems Only) ....................................... 5–14

Summary ........................................ 5–14

Keyboard Languages ............................... 5–14

Setting the Keyboard Language ....................... 5–14

Default Keyboard Language Example .................. 5–15

Setting the Default Operating System from the OpenVMS and

OSF/1 Console ....................................... 5–16

Summary ........................................ 5–16

Operating System Names ........................... 5–16

Setting the Operating System ........................ 5–17

Default Operating System Example . ................... 5–17

Setting the HOST SCSI ID . . ........................... 5–18

Summary ........................................ 5–18

SCSI Buses . . . ................................... 5–18

SCSI IDs ........................................ 5–18

Setting the HOST SCSI ID .......................... 5–18

HOST SCSI ID Example . ........................... 5–19

6 Troubleshooting the System

Introduction ...................................... 6–1

In This Chapter . . . ................................ 6–1

Before You Begin ..................................... 6–2

Summary ........................................ 6–2

Problem Solving Methods............................ 6–2

What You Must Do First ............................ 6–2

Determining the Problem ............................... 6–3

Summary ........................................ 6–3

Troubleshooting Table Titles . ........................ 6–3

Network Problems . ................................ 6–3

Power-Up Problems . . . ................................ 6–4

Summary ........................................ 6–4

Power-Up Troubleshooting . . ........................ 6–4

Boot Problems ....................................... 6–7

Summary ........................................ 6–7

Boot Troubleshooting .............................. 6–7

Keyboard and Mouse Problems (DECpc AXP 150 Systems

Only) .............................................. 6–8

Summary ........................................ 6–8

Keyboard and Mouse Troubleshooting . . ................ 6–8

SCSI Drive Problems . . ................................ 6–10

Summary ........................................ 6–10

Generic SCSI Drive Troubleshooting . . . ................ 6–10

RRD42 CD-ROM Drive Troubleshooting ................ 6–11

SCSI Drive Problems, continued ......................... 6–12

TLZ06 Tape Drive Troubleshooting .................... 6–12

TZK10 Tape Drive Troubleshooting .................... 6–13

Diskette Drive Problems ............................... 6–14

RX26 Diskette Drive Troubleshooting . . ................ 6–14

Network and Option Board Problems...................... 6–16

Summary ........................................ 6–16

Network Troubleshooting . . . ........................ 6–16

Option Board Troubleshooting ........................ 6–16

Otros manuales para DECpc AXP 150

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de De oficina de Digital Equipment

Digital Equipment

Digital Equipment MicroVAX 3100 Model 30 Guía de inicio rápido

Digital Equipment

Digital Equipment Starion Series Manual de usuario

Digital Equipment

Digital Equipment VAX 4000 500A Manual de instrucciones

Digital Equipment

Digital Equipment microvax II 630qy Manual de usuario

Digital Equipment

Digital Equipment VAXstation 2000 Manual

Digital Equipment

Digital Equipment VT78 Manual de usuario

Digital Equipment

Digital Equipment VAX 4000 Model 100 Guía de inicio rápido

Digital Equipment

Digital Equipment VAX 4000 Model 300 Manual de usuario

Digital Equipment

Digital Equipment PDP-8/A Manual de servicio

Digital Equipment

Digital Equipment DECstation 2100 Manual

Digital Equipment

Digital Equipment digital VAX 8200 Manual de usuario

Digital Equipment

Digital Equipment DEC 3000 500X AXP Instrucciones de funcionamiento e instalación

Digital Equipment

Digital Equipment Micro PDP-11/53 Manual del propietario

Digital Equipment

Digital Equipment Venturis FX Manual de usuario

Digital Equipment

Digital Equipment Digital AlphaStation 200 Series Manual

Digital Equipment

Digital Equipment STARION 200i Manual de usuario

Digital Equipment

Digital Equipment DECsystem 5500 Manual de instrucciones

Digital Equipment

Digital Equipment VAXmate Manual de usuario

Digital Equipment

Digital Equipment DEC 3000 Manual de usuario

Digital Equipment

Digital Equipment VAX 4000 100 Manual de servicio

Digital Equipment

Digital Equipment 600A Manual de instalación y operación

Digital Equipment

Digital Equipment VT100 Manual de usuario

Digital Equipment

Digital Equipment DEC 3000 300 AXP Series Instrucciones de uso

Digital Equipment

Digital Equipment DECstation 5000 Guía de inicio rápido

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario