DieHard 200.71988 Manual de usuario

OPERATOR'S MANUAL

Portable Power 1150

Jump Starter/DC Power Source

Air Compressor, inflator and AC Power

Model No.

200.71988

CAUTION:

Read all Safety Rules and Operating Instructions,

and follow them with each use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

00-99-000865/0808

SECTION PAGE

1. iMPORTANT SAFETY iNSTRUCTiONS 1

2. PRODUCT FEATURES 2

3. CHARGING THE iNTERNAL BATTERY 3

4. JUMP-STARTING AVEHICLE ENGINE 4

5. DiGiTAL DISPLAY FUNCTIONS 5

6. POWERING A 12V DC DEVICE 5

7. USING THE USB PORT 6

8. USING THE BUILT-IN LIGHT 6

9. iNTERNAL BATTERY REPLACEMENT 7

10. USING THE AiR COMPRESSOR 7

11. USING THE iNFLATOR 8

12. ESTIMATED TiME FOR iNFLATiNG 8

13. USING THE DEFLATOR 8

14. BEFORE USING THE iNVERTER 9

15. USING THE iNVERTER 9

16. POWERING THE 110VAC DEVICE 10

17. EXAMPLE RUN-TIME CHART 10

18. STORAGE AND MAINTENANCE 11

19. SPECiFiCATiONS 12

20. AC POWER SPECiFiCATiONS 12

21. REPLACEMENT PARTS 12

DieHard One-year Full Warranty

When operated and maintained according to all supplied instructions, if this DieHard

product fails due to a defect in material or workmanship within one year from the

date of purchase, return it to any Sears store or other DieHard outlet in the United

States for free replacement.

This warranty does not include light bulbs, or the inflator hose and adapters, which

are expendable parts. This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

FOR CUSTOMER ASSISTANCE OR REPLACEMENT PARTS,

CALL TOLL-FREE BETWEEN 7 AM TO 4:30 PM CT

MONDAY THROUGH FRIDAY: 1-800-SEARS-64 (1-800-732-7764)

CONTAINS SEALED NON-SPILLABLE LEAD=ACID

BATTERY. MUST BE DISPOSED OF PROPERLY.

WARNING: Possible explosion hazard. Contact with

battery acid may cause severe burns and blindness.

Keep out of reach of children.

iMPORTANT: CHARGE iMMEDiATELY AFTER PURCHASE

IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.

1.1 Charge the 1150% internal battery immediately upon purchase, every 30

days and after every use.

1.2 Use in a welt ventilated space.

1.3 Contains a sealed, non-spitlable lead-acid battery. Must be disposed of

properly.

1.4 WARNING: Possible explosion hazard. Contact with battery acid may

cause severe burns and blindness. Keep out of reach of children.

1.5 WARNING: Pursuant to California Proposition 65, this product contains

chemicals known to the State of California to cause cancer and birth de-

fects or other reproductive harm.

1.6 WARNING: Failure to follow instructions may cause damage or an explo-

sion. Read entire instruction manual before use. Always wear safety glass-

es to protect your eyes during use.

.1.

3 8

19 13

14 12

1. JUMP START ON/OFF Switch.

Turn on to activate clamps and

USB.

2. Inverter/Compressor switch. This

switch turns the inverter or air

compressor on and off.

3. Digital Display - indicates internal

and vehicle's battery percentage of

charge and displays a code when

improperly connected to battery.

The display also shows power out

when using the inverter.

4. Plastic lens cover

5. Two, light bulbs

6. Two, 12V DC power outlets

7. Two, 110VAC household power

outlets.

8. USB port

9. Power Switch (Light/Display). This

switch turns on the light or the in-

ternal battery status digital display.

10. Air compressor gauge

11. Air compressor hose

12. Air compressor accessory bag

13. Air compressor ball inflation

adapter

14. Two, air compressor miscella-

neous inflation adapters

15. ON/OFF inflator/deflator switch

16. High-flow inflator outlet

17. Inflator/deflator hose end adapter

18. High-flow deflator outlet

19. Inflator/deflator hose

20. Two cables with clamps

21. Male-to-male accessory 12V

charging connector

22. Three inflator/deflator hose device

adapters.

23. Wall Charger

.2.

3.1

3.2

3.3

3.4

IMPORTANT:

'_CHARGE IMMEDIATELY AFTER PURCHASE

'_KEEP FULLY CHARGED.

This Portable Power 1150 comes with a sealed, non-spitlabte DieHard

maintenance-free lead-acid battery. This internal battery is specifically

designed to deliver high power jump-starting as welt as repetitive deep

cycling performance.

To charge the Portable Power 1150's internal battery:

Check the internal battery's charge level by pressing the switch marked

DISPLAY. The Digital Display wilt show the battery's percentage. Charge if

under 100%

NOTE: Internal battery's percentage is most accurate when the Portable

Power 1150 has been disconnected from all devices and charging sources

for 1 - 24 hours.

To charge, plug the (external) wall charger cord into the socket on the

back of the 1150. Then, plug the wall charger into a 120V AC source.

CAUTION: Operating the Portable Power 1150 while the internal battery is

being charged may cause permanent damage to the unit.

While the 1150 is charging, the battery's percentage of charge wilt be

displayed. When the internal battery is fully charged, the display will show

100. Complete charging may take up to 48 hours. The 1150 is then ready

to use.

Once the battery is fully charged, the internal charging circuitry automati-

cally switches to float-mode monitoring, which keeps the battery fully

charged without overcharging.

The internal battery may also be charged while you drive using the male-

to-male accessory cable (available separately, see "Accessories and Re-

placement Parts" section of this manual). Insert one end of the accessory

cable into the 12V DC power outlet and the other end into the vehicle's

accessory outlet (lighter socket). Completely disconnect the accessory

cable when the engine is not running.

.3.

Use in a well-ventilated area. Keep hands, hair, clothing and jewelry clear

of fan blades, belts, pulleys and other parts that may cause injury.

4.1 Turn ignition off before making cable connections.

4.2 Place the 1150 on a flat, stable surface near the vehicle battery and away

from moving engine parts.

4.3 Connect the red clamp to the positive (+) terminal dthe vehicle battery.

4.4

4.5

4.6

NOTE: In the rare case of jump-starting a vehicle that has a positive-

grounded vehicle electrical system, connect the black clamp to the

negative terminal of the vehicle battery. Then connect the red clamp to

an unpainted and unmoving part of the vehicle chassis or engine block. If

you are unsure of the nature of the vehicle's electrical grounding system,

check the owner's manual of the vehicle or call the Customer Technical

Assistance number: 1-800-SEARS-64.

Connect the black clamp to an unpainted and unmoving part of the vehicle

chassis or engine block. Do not connect to the carburetor, fuel lines or

sheet-metal body parts. The Digital Display displays the vehicle's voltage.

CAUTION: If you have connected the clamps backwards, an audio alarm

will sound. DO NOT turn the ON/OFF switch to the ON position. This could

cause serious damage. Reverse the connections and the audio alarm wilt

stop.

Turn ON the JUMP START ON/OFF switch and then turn key and crank

the engine. If the engine does not start within 5-8 seconds, stop cranking

and wait at least one minute before attempting to start the vehicle again.

This permits the battery to cool down.

After the engine starts, make sure to turn OFF the Jump Start switch.

Then disconnect the black clamp (-) and then the red clamp (+) in that

order.

4.7 Recharge the 1150 as soon as possible after use.

CAUTION: To prevent sparking while the 1150 jump-start switch is in the

ON position, NEVER allow the clamps to touch together or to contact the

same piece of metal. Never attempt to charge a frozen battery.

.4.

5.1 Tocheckthe1150'sinternalbattery'sstatus,pushthepowerswitchon

thefrontofthe1150totheDISPLAYposition.Thedisplaywillshowthe

chargepercentageoftheinternalbattery.

5.2 Whenconnectedtothevehicle,thedisplayshowsthevehicle'sbattery

voltage.WhenconnectedandintheONposition,thedisplayshowsthe

equalizedvoltagebetweenthevehicle'sbatteryandinternalbattery.If

thedisplaybuttonispressed,thebatterypercentageisshown(insteadof

voltage).

5.3 Whentheinverteristurnedonandbeingused,thedisplaywillshowthe

totalwattageusedbythedevicebeingpoweredbytheinverter.

6.1

ThePortablePower1150isapowersourceforall12voltDCaccessories

thatareequippedwitha12Vaccessoryplug.TheDCaccessoryoutlet

hasa15-ampautomaticoverloadprotectioncircuitbreaker.Thebreaker

wiltautomaticallyresetafteranoverloadoccurs.

To Operate a 12V DC Device:

•Open the protective cover of the DC power outlet on the front panel of the

Portable Power 1150.

• Ptug the 12V DC device into the DC power outlet, and turn the 12V DC

device "ON" (if required).

• If the 12V DC device draws more than 15A, the internal circuit breaker

of the Portable Power 1150 will momentarily disconnect power to the

device. If this occurs, unplug the device and the circuit breaker will auto-

matically reset after several seconds.

• The DC power outlet is internally wired directly to the internal battery.

Extended operation of a 12V DC device may result in excessive battery

drain. Recharge immediately after unplugging the device.

.5.

5.2 12V DC Electrical Device Example Run=Time Chart

Appliance Type Estimated Power Estimated

Time*

Fluorescent Lights, Cellular Phones 4 Watts 50 Hours

Radios, Depth Finders, Fans 9 Watts 25 Hours

Camcorders, DVD Players, Spotlights 15 Watts 13 Hours

Electrical Tools, Bilge Pumps 24 Watts 7.3 Hours

Electric Coolers 48 Watts 4.5 Hours

Air Compressors, Car Vacuums 80 Watts 2 Hour

*NOTE: Estimated run-times. Actual time may vary. Times are based on

the internal battery being new, fully charged and operating at room tem-

perature.

The USB port on the 1150 provides up to 500mA at 5VDC.

7.1 Turn the JUMP START ON/OFF switch to the ON position.

7.2 Plug the device into the USB port on the front panel of the 1150.

7.3 Turn USB device ON.

7.4 Reverse these steps when finished using the USB port.

8.1

8.2

8.3

8.4

Position the 1150 on a flat, stable surface near the intended work area.

Push the power switch to the LIGHT position. The light will turn on and

illuminate your work area.

NOTE: With a fully charged internal battery, the built-in light should pro-

vide 18 to 30 hours of continuous, useful light.

Push power switch to the OFF position when work is completed.

Charge the 1150 as soon as possible after using the built-in light.

NOTE: With a fully charged internal battery, the built-in light should

provide 18 to 26 hours of continuous useful light, depending on ambient

conditions.

.6.

The 1150 is equipped with a built in door, located on the back of the unit,

to make replacing the internal battery easy and efficient.

To order a replacement battery, call: 1-800-SEARS-64.

9.1 Be sure that all switches are in the OFF position.

9.2 Remove clamps from storage pegs on the back of the 1150.

9.3 Remove eight screws from the door.

9.4 Slide door out.

9.5 Remove the negative (first) and positive nuts and bolts securing the cable

to the battery.

9.6 Push cables to the side and carefully slide battery out of the 1150.

9.7 Reverse steps for assembly. Make sure that the nuts and bolts securing

the cables are tight.

CAUTION: Read instructions of the product being inflated before using

the compressor. Avoid over inflation, do not exceed the manufacturer's

recommended pressures. Do not leave the air compressor unattended

during use.

10.1 Remove the air compressor hose from the storage compartment in the

back of the Portable Power 1150. Install adapters as necessary.

10.2 Attach the air compressor hose to the product or accessory to be inflated

by flipping down the lever.

10.3 Place the Inverter/Compressor Switch in the compressor position and

inflate product.

10.4 When the product is inflated to the proper air pressure (using the air com-

pressor gauge) place the Inverter/Compressor Switch in the OFF position

and remove the hose.

10.5 Do not run for more than 10 minutes maximum at a time. Allow the 1150 to

cool down for 10 minutes before using again.

NOTE: If the compressor overheats, the built-in thermal protection will turn

the unit off. Wait a few minutes and it will automatically restart.

NOTE: The air compressor is rated for 150 PSI.

10.6 Estimated Time for Inflating

Vehicle Tires 13" to 16" 6 to 24 minutes

Bike Tire 1 to 3 minutes

Sports Balls 30 seconds

Use the air compressor gauge to ensure the proper pressure has been

reached. Do not over inflate.

.7.

11.1

CAUTION:Readinstructionsoftheproductbeinginflatedbeforeusing

theinflator.Avoidoverinflation,donotexceedthemanufacturer'srecom-

mendedpressures.Donotleavetheinflatorunattendedduringuse.

Attachthecorrugatedhosewithendadaptertothehigh-flowinflatoroutlet

locateddirectlyabovetheinflatorON/OFF switch on the back of

the 1150.

11.2 The main accessory adapter attached to the corrugated hose accommo-

dates up to 4 sizes. If another size is needed an additional adapter can be

attached to the end of the main accessory adapter.

11.3 Insert the adapter into the product to be inflated.

11.4 Push the inflator switch to the ON position and inflate product.

11.5 When product is inflated to the desired level, push the inflator switch to the

OFF position and remove the adapter.

24" Beach Ball 1 to 3 minutes

Pool Raft 4 to 6 minutes

Queen-size Air Mattress 4 to 8 minutes

2 Person Boat 8 to 10 minutes

*Times may vary depending on size and product features.

13.1 Attach the corrugated hose with the end adapter to the high-flow deflator

outlet which is located on the right side of the 1150.

13.2 The main accessory adapter attached to the corrugated hose accommo-

dates up to 4 sizes. If another size is needed, an additional adapter can be

attached to the end of the main accessory adapter.

13.3 Insert the adapter into the item to be deflated.

13.4 Push the inflator switch to the ON position and deflate item.

13.5 When product is deflated to the desired level, push the inflator switch to

the OFF position and remove the adapter.

,8,

Otros manuales para 200.71988

Este manual sirve para los siguientes modelos

Otros manuales de Arranque remoto de DieHard

DieHard

DieHard DieHard 200.71990 Manual de usuario

DieHard

DieHard 200.71486 Manual de usuario

DieHard

DieHard 28.71686 Manual de usuario

DieHard

DieHard Portable Power 950 Manual de usuario

DieHard

DieHard 28.71486 Manual de usuario

DieHard

DieHard 200.71988 Manual de usuario

DieHard

DieHard DH155 Manual de usuario

DieHard

DieHard 200.71488 Manual de usuario

DieHard

DieHard Portable Power 750 Manual de usuario

DieHard

DieHard DH110 Manual de usuario

DieHard

DieHard DieHard 00-99-000867-0109 Manual de usuario

DieHard

DieHard Portable Power 950 Manual de usuario

DieHard

DieHard Portable Power 950 28.71687 Manual de usuario

DieHard

DieHard 2871222 Manual de usuario

DieHard

DieHard 200.71987 Manual de usuario

DieHard

DieHard Portable Power 950 Manual de usuario

DieHard

DieHard 28.71688 Manual de usuario

DieHard

DieHard Portable Power 750 Manual de usuario

DieHard

DieHard 71686 Manual de usuario

Manuales populares de Arranque remoto de otras marcas

AstroStart

AstroStart 803U Manual de usuario

Durite

Durite 0-649-20 Manual

EINHELL

EINHELL BT-PS 1000 Manual

Linear

Linear ACCESS AK-21 Especificaciones técnicas

Soundstream

Soundstream TARANTULA RS.2 Manual de usuario

Jaycar Electronics

Jaycar Electronics MB3752 Manual de usuario

Ultra Start

Ultra Start 72 Series Manual de usuario

ADS

ADS FLASHLOGIC FLRSVW1 Manual de usuario

Selecta

Selecta JS012 Manual de usuario

Black Widow Security

Black Widow Security BW RAS 400 Manual de usuario

Vector

Vector Power City DK080706 Suplemento

Code Alarm

Code Alarm CA-535 Manual de usuario

Ozito

Ozito OJS-800 Manual de usuario

Profi-Partner

Profi-Partner 46387 Manual de usuario

EZ STARTER

EZ STARTER EZ-45 Manual de usuario

Viper

Viper 4204 Manual de usuario

Essex Electronics

Essex Electronics KE-1701 Manual de usuario

EINHELL

EINHELL EGS 3600 Manual