DGTEC DG-HDPVR5009 Manual de usuario
HELP PROVIDED
NEED HELP?
If you are experiencing difficulty operating this product or require set up
assistance please contact the DGTEC Service Centre. The call is free from
anywhere in Australia. Our operators will assist you in plain English without the
technical jargon:
(Australia)
8:OOam-6:OOpm Australian EST
* Subject to change without notice.
1
INDEX
INDEX............................................................................................................................2
SAFETYAND INSTRUCTIONS.....................................................................................3
ASSEMBLYAND PARTS LIST......................................................................................4
1.1 PARTS LIST.............................................................................................................4
1.2 FEATURES..............................................................................................................4
1.3 FRONT PANEL........................................................................................................5
1.4 REAR PANEL ..........................................................................................................6
1.5 REMOTE CONTROL UNIT......................................................................................7
1.6 INSTALLING THE BATTERIES IN THE REMOTE CONTROL................................8
1.7 CONNECTING TO EQUIPMENT ............................................................................9
GETTING STARTED ...................................................................................................11
2.1 INSTRUCTIONS....................................................................................................14
2.2 TIMER SETTING...................................................................................................14
2.3 SYSTEM SETTINGS.............................................................................................15
2.4 CHANNEL MANAGER...........................................................................................17
2.5 PARENTAL CONTROL..........................................................................................18
2.6 FILE MANAGER....................................................................................................19
2.7 INSTALLATION......................................................................................................19
2.8 EPG .......................................................................................................................21
2.9 TELETEXT.............................................................................................................22
3. PVR FUNCTION......................................................................................................22
3.1 PVR SETTINGS.....................................................................................................23
3.2 RECORD LIST.......................................................................................................24
4.1 TROUBLE SHOOTING..........................................................................................27
4.2 SPECIFICATION....................................................................................................28
2
SAFETY AND INSTRUCTIONS
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE THE COVER.
THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make contact with any part inside the case.
This symbol alerts you of important information concerning operation and
maintenance of this product.
SAFETY
．Never place the unit in hot, humid or excessively dusty places.
．Do not install the unit where it may be exposed to mechanical vibrations.
．This product should be operated only from the type of power source indicated on the
rear of the unit.
．Do not touch the power cord with a wet hand or continue to use a damaged power
cord. It may cause an electric shock.
．Never open the cover. High voltage in the unit may result in electrocution.
．Disconnect the power cord to the unit before connecting any cables.
CAUTION
．To prevent fire or electrical shock do not expose the appliance to water.
．Ensure that objects filled with liquids, such as vases, are not placed on the
apparatus.
．If an object or liquid gets into the unit, disconnect the plug and ask an approved
technician to check the unit.
．Never place the unit in a confined space such as a bookcase or built-in cabinet
unless proper ventilation is provided. Leave a 10cm gap around the unit.
．The recommended operating temperature is from 0 ~ 40℃℃and humidity should be
under 95%.
．For your own safety, do not touch any part of the unit, power lead or aerial
lead during a lightning storm.
．Use a damp cloth to clean the unit.
．Do not use liquid cleaners, solvent or abrasive products, etc.
3
ASSEMBLY AND PARTS LIST
1.1 Parts List
Please make sure the following accessories are supplied with the STB.
① High-Definition Personal Video Recorder (PVR )
② Remote Control
③ RCA Video/Audio Cable
④ Batteries (AAA Size)
⑤User Manual
⑥Quick Start Guide
⑦RF Loop Cable
1.2 Features
zTwin Tuner High Definition Personal Video Recorder.
zRecord two channels at the same time and watch a third channel from the same
bandwidth. For example record channels 7 and 9 and watch either channel 72 or
channel 99.
zRecord two channels at the same time and watch a recorded file in playback.
zChase play a file that is recording.
zTimeshift, press the PAUSE key on the remote to pause Live TV.
zSet your recordings a week ahead using the EPG.
zView JPEG files and play MP3s from a USB drive.
zRecords programs from standby mode.
4
ASSEMBLY AND PARTS LIST
1.3 Front Panel
1. Standby Button
Press to switch between operation and standby modes. The blue LED illuminates
when in the standby mode.
2. Volume Left/Right Button (◄/►)
Moves the cursor left/right when in the menu or adjusts the volume level in
operational mode.
3. CH UP/Down Button (▲/▼)
Moves the cursor up/down when in the menu or changes the current program to the
previous/next channel in operational mode.
4. OK Button (OK)
Press to select an item in the menu or to activate the Channel List in operational
mode.
5. Menu Button (MENU)
Press to display the Main Menu or to exit from the menu.
6. Infrared Remote Sensor (IR)
A hidden sensor senses infrared signal from the remote control.
7. Front Panel Display
Front panel window displays operational information. Not all symbols featured below
can be displayed at the same time.
USB / HDD lights up when there is USB 2.0 Flash Drive / USB 2.0 External Hard
Disk Drives connected to the STB;
●REC 1 / 2 illuminates when the STB is recording one or two programs;
///illuminates in accordance with the active function in playback mode;
TV / Radio illuminates the active mode;
HD /DOLBY Displayed when HDTV or Dolby is detected in the program;
lights up when timer events booked in the EPG or timer;
The signal quantity and channel number will also be displayed on the front panel.
5
ASSEMBLY AND PARTS LIST
1.4 Rear Panel
1. ANT IN
Used to connect an antenna.
2. ANT OUT (LOOP OUT)
Used to connect an extra analogue or digital STB.
Please connect LOOP OUT (M) with ANT IN (S) correctly.
3. RS232 Serial Port
For firmware update, serial communication port (RS-232).
4. DIGITAL AUDIO (S/PDIF / Optical)
Connect to an External Audio Amplifier with S/PDIF / Optical Digital Audio.
5. HDMI Connector
Connect High-Definition Multimedia output to HD Monitors (HDMI Type).
6. YPbPr
Connect component video to HD Monitors (YPbPr Type).
7. VIDEO (Yellow RCA)
Connect to a TV with video input.
8. AUDIO L/R (White / Red RCA)
Connect to a TV audio input, HD Monitors audio input or an External Audio Amplifier.
9. VGA Connector
Connect component video to HD Monitors (VGA Type).
10. USB
USB port is used to view JPEG files, play MP3 files and for possible software
upgrades. (to be advised by DGTEC technician)
6
ASSEMBLY AND PARTS LIST
1.5 Remote Control Unit
All PVR features can be operated with the remote
control.
1. POWER: Press to switch between operation
and standby mode.
2. TV/RADIO: Press to switch between TV and
RADIO mode.
3. MUTE:Press to mute the sound.
4. AUDIO: Select an item in the audio mode.
5. MTS: Press to select an item in the sound mode.
6. TEXT: Display the Teletext information (not always
available).
7. SUBT: Displays Closed Captions (CC).
8. NUMERIC KEYS: Select channels and input
numbers for codes
9. FAV: Press to display Favorite Channel Mode.
10. ASPECT: Press to select 4:3 or 16:9 aspect ratio
mode.
11. SCAN: Press to automatically scan for digital
channels.
12. TIMER: Enters Timer environment.
13. MENU: Displays or exits the Main Menu.
14. EXIT: Press to return to the previous menu or to
escape from the current mode.
15. Up▲/ Down▼: Change the channel or move the
cursor in the menu.
16. Left◄/ Right►: Adjust volume or move cursor in
the menu.
17. OK: Select a highlighted item in the menu or
displays the channel list.
18. PAGE +/ PAGE–: Press to navigate to top and
bottom of pages in the channel list and EPG.
19. RECALL: Return the previous channel.
20. i: Displays current program information.
21. 30-（Red）: 30sec jump backwards.
22. 30+ (Green): 30sec jump forward.
23. FREEZE (Yellow): Freeze the video output of the STB (this is not Timeshift,
press Pause to activate Timeshift).
24. EPG (Blue): Displays the 8 day Electronic Program Guide.
25. P.STD: Selects the display resolution mode (1080i/720p/576p).
26. V.PORT: Press to switch between YUV and RGB mode (RGB mode needs to be
selected only if connected to a PC by the VGA Connector).
7
ASSEMBLY AND PARTS LIST
1.6 Installing the batteries in the remote control
1. Press down on the retaining catch on the lid of the battery recess on the remote
control and slide downward to remove the lid.
2. Insert two AAA batteries into the recess.
3. Replace the lid over the recess and gently push down on the lid and slide upward
until it snaps firmly into place.
Caution
1. Keep batteries out of the reach of children.
2. Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries
into the fire.
3. Always replace both batteries at the same time. Never mix new and old batteries
or batteries of a different type.
4. If you don’t intend to use the remote control for an extended period, remove the
batteries to prevent possible leakage and corrosion.
5. Do not drop, apply shock or step on the remote control.
6. Do not spill water on the remote control.
Note: If the STB does not respond when operating the remote control from a
close range, you will need to replace the batteries.
Using the Remote Control
1. To use the remote control, point it towards the front of the PVR.
2. The remote control has a range of up to 7 metres from the PVR at an angle of up
to 60 degrees.
3. The remote control will not operate if its path to the sensor on the front panel of the
PVR is blocked.
Note: Sunlight or very bright light will decrease the sensitivity of the remote
control.
8
ASSEMBLY AND PARTS LIST
1.7 Connecting to Equipment
1. Connect your TV antenna cable to the “ANT IN” jack on the back of the PVR using
coaxial RF cable. Make sure the loop cable is connected correctly to activate the
second tuner (see the diagram below)
YPbPr connection
2. Connect the YPbPr output connectors (three RCA connectors - green, red and
blue) for video from the rear panel of the PVR to the COMPONENT IN on your
television matching colour for colour and AUDIO L/R output connectors (two RCA
connectors – red and white) for audio from rear panel of the PVR to the
corresponding audio input of your television.
VGA
3. Connect the VGA cable from the VGA output on the rear panel of the PVR to the
VGA input of your computer and the AUDIO L/R (two RCA connectors – red and
white) connectors on the rear panel of the PVR to the audio input on your
computer.
9
Tabla de contenidos
Otros manuales de DVR de DGTEC
