DFI CD70-SC Manual de usuario
CD70-SC
Rev. A+
System Board Users Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Tablero Electrónico del Sistema Manual del Usuario
45900106
Copyright
This publication contains information that is protected by copyright.
No part of it may be reproduced in any form or by any means or
used to make any transformation/adaptation without the prior
written permission from the copyright holders.
This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to
the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any
particular purpose.The user will assume the entire risk of the use or
the results of the use of this document. Further, the manufacturer
reserves the right to revise this publication and make changes to its
contents at any time, without obligation to notify any person or
entity of such revisions or changes.
© 2001. All Rights Reserved.
Trademarks
Microsoft®MS-DOS®, WindowsTM, Windows®95, Windows®98,
Windows®98 SE, Windows®ME, Windows®2000 and Windows
NT®4.0 are registered trademarks of Microsoft Corporation. Intel®,
Pentium®III and CeleronTM are registered trademarks of Intel
Corporation. VIA and VIA CyrixIII are a registered trademarks of
VIA Technologies, Inc. Award is a registered trademark of Award
Software, Inc. Other trademarks and registered trademarks of
products appearing in this manual are the properties of their
respective holders.
Caution
To avoid damage to the system:
Use the correct AC input voltage range.
To reduce the risk of electric shock:
Unplug the power cord before removing the system chassis
cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery:
Danger of explosion if battery incorrectly replaced.
Replace only with the same or equivalent type recommend by
the manufacturer.
Dispose of used batteries according to the battery
manufacturers instructions.
Joystick or MIDI port:
Do not use any joystick or MIDI device that requires more than
10A current at 5V DC. There is a risk of fire for devices that
exceed this limit.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for
help.
Notice:
1. The changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
2. Shielded interface cables must be used in order to comply with
the emission limits.
4
Quick Setup Guide
1
Quick Setup
Guide
Table of Contents
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français (French).................................................
Chapter 4
Deutsch (German)................................................
Chapter 5
Español (Spanish)..................................................
5
25
41
57
74
5
1
Quick Setup Guide
Quick Setup
Guide
Chapter 1 - Quick Setup Guide
Table of Contents
1.1 System Board Layout..................................................................................................
1.2 Jumpers.....................................................................................................................................
1.3 Ports and Connectors................................................................................................
1.4 Award BIOS Setup Utility.......................................................................................
6
7
10
20
6
Quick Setup Guide
1
Quick Setup
Guide
1.1 System Board Layout
7
1
Quick Setup Guide
Quick Setup
Guide
1.2 Jumpers
1.2.1 CPUs Front Side Bus - JP1 and JP2
Warning:
Some processors, when overclocked, may result to the processors or
systems instability and are not guaranteed to provide better system
performance. If you are unable to boot your system due to
overclocking, make sure to set these jumpers back to their default
settings.
1
2
3
JP1 JP2
1-2 On
1
2
3
JP1 JP2
2-3 On
1
2
3
JP1 JP2
All Off
Auto*
66MHz
100MHz
133MHz
JP1
1-2 On
2-3 On
1-2 On
1-2 On
JP2
1-2 On
2-3 On
2-3 On
All Off
* denotes default setting
8
Quick Setup Guide
1
Quick Setup
Guide
1.2.2 Clear CMOS Data - JP4
1.2.3 Onboard Audio Codec - J12
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
12 3
12 3
1-2 On: Enable the
Onboard Audio Codec
(default)
2-3 On: Disable the
Onboard Audio Codec
123
123
9
1
Quick Setup Guide
Quick Setup
Guide
1.2.3 Wake-On-USB for USB 1 and USB 2 - J14
On: Enable the
Wake-On-USB function
12
Off: Disable the
Wake-On-USB function
(default)
12
Important:
The 5VSB power source of your power supply must support
≥
1.5A.
10
Quick Setup Guide
1
Quick Setup
Guide
1.3 Ports and Connectors
1.3.1 PS/2 Mouse and PS/2 Keyboard Ports
Make sure to turn off your
computer prior to connecting or
disconnecting a mouse or keyboard.
Failure to do so may damage the
system board.
PS/2 Mouse
PS/2 Keyboard
1.3.2 Parallel Port
Parallel Port
Tabla de contenidos
Otros manuales de Placa madre de DFI
DFI
DFI GIC88-B Manual de usuario
DFI
DFI AK74-SC Manual de usuario
DFI
DFI KT600-AL Manual de usuario
DFI
DFI NP101-D16C Manual de usuario
DFI
DFI CB50-V3 Manual de usuario
DFI
DFI G586IPV Manual de usuario
DFI
DFI AM33-EC Manual de usuario
DFI
DFI KU171 Manual de usuario
DFI
DFI BL100 Series Manual de usuario
DFI
DFI WL171 Manual de usuario
DFI
DFI 915P-TAL Manual de usuario
DFI
DFI AD72-SC Manual de usuario
DFI
DFI CMS632-W480E Manual de usuario
DFI
DFI AD75 Manual de usuario
DFI
DFI CS181 Manual de usuario
DFI
DFI FS053 Manual de usuario
DFI
DFI PB50-V3 Manual de usuario
DFI
DFI AK34-SC Manual de usuario
DFI
DFI BW171 Manual de usuario
DFI
DFI SD630-H110 Manual de usuario
Manuales populares de Placa madre de otras marcas
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
Biostar
Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación
