DEWESOFT DS-CAM-88c Manual del producto
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
DS-CAM-88c / DS-CAM-120c V20-1
1
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
1. Table of contents
1. Table of contents 2
2. About this document 3
2.1. Legend 3
3. Key features 4
3.1. System Requirements 4
4. Technical data 5
4.1. Specifications 5
4.2. Connections 6
4.2.1. Power/Trigger connector pinout 7
4.2.2. SIRIUS connection example 8
4.2.3. Connecting to existing DEWETRON systems 9
4.2.4. Connecting multiple cameras 10
4.2.5. Connections Overview 12
4.3. Benchmarks 13
5. Installation 14
5.1. DEWESoft Fullinstaller 14
5.2. Manual update (camera driver and DEWESoft) 15
5.2.1. Step-by-step instruction 15
6. FAQ 21
7. Warranty information 25
7.1. Calibration 25
7.2. Support 25
7.3. Service/repair 25
7.4. Restricted Rights 25
7.5. Printing History 26
7.6. Copyright 26
7.7. Trademarks 26
8. Safety instructions 27
8.1. Safety symbols in the manual 27
8.2. General Safety Instructions 27
8.2.1. Environmental Considerations 27
8.2.2. Product End-of-Life Handling 27
8.2.3. System and Components Recycling 27
8.2.4. General safety and hazard warnings for all Dewesoft systems 28
9. Documentation Version 31
DS-CAM-88c / DS-CAM-120c V20-1 2/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
2. About this document
2.1. Legend
The following symbols and formats will be used throughout the document.
Important
It gives you important information about the subject.
Please read carefully!
Hint
It gives you a hint or provides additional information about a subject.
Example
Gives you an example of a specific subject.
DS-CAM-88c / DS-CAM-120c V20-1 3/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
3. Key features
The DS-CAM-88c/DS-CAM-120c are a high-speed Gigabit-Ethernet cameras with following key data:
●DS-CAM-120c: 120 fps @ VGA (640x480)
●DS-CAM-88c: 88 fps @ VGA (640x480)
●Color
●Auto-gain
●Auto-shutter (also fixed shutter possible)
●Auto-white balance
●Triggered and free-run mode
●Standard C-Mount
●Small compact form factor
●Low power consumption
●Ruggedized (high-shock and vibration resistant, aluminium housing)
●Real-time data streaming with full resolution
The camera supports the high-performance industrial standard “GigE Vision”. The standard introduced
in 2006 provides a framework for transmitting high-speed video and related control over Ethernet
networks.
The benefits are: high speed data transfer rates up to 1GBit/s (based on 1000Base-T) connectible to every
standard GigE Ethernet port and cable lengths up to 100m.
Dewesoft uses Smartek GigE SDK for communication with cameras that support GigE Vision standard.
IMPORTANT : For best performance we recommended using a SSD for
storing data.
A disk write rate of 100 MByte/s should be established, especially if using
more than 1 camera!
3.1. System Requirements
●1 Gigabit-Ethernet port
●Good PC performance (Core i5 CPU or better recommended, 4 GB RAM)
●DEWESoft X or 7.1
●Smartek GigE Vision SDK 2.7.0.1
●DEWESoft GigE driver (cdv) 3.5
DS-CAM-88c / DS-CAM-120c V20-1 4/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
4. Technical data
4.1. Specifications
DS-CAM-88
DS-CAM-120
Color option
Color
✓
✓
Monochrome
-
-
Optical specifications
Image sensor
Sony ICX414
Sony ICX618
Sensor type
CCD
CCD
Resolution
VGA 640x480
VGA 640x480
FPS
88 FPS @ 640x480
167 FPS @ 320x240
289 FPS @ 160x120
120 FPS @ 640x480
Optical size
1/2''
1/4''
Pixel size (in μm)
9.9 x 9.9
5.6 x 5.6
Dynamic range
35 dB auto gain function
32 dB auto gain function
Shutter
Full frame
Full frame
Shutter time
autoshutter function
autoshutter function
Color correction
Auto white-balance
Auto white-balance
Mechanical specifications
Operating temperature
+5 .. +45°C
+5 .. +45°C
Operating humidity
25% - 80% (no
condensation)
25% - 80% (no
condensation)
Dimensions
86.4 x 44 x 29mm
(3.40 x 1.73 x 1.14in)
86.4 x 44 x 29mm
(3.40 x 1.73 x 1.14in)
Lens mount
C-mount
C-mount
Connectors
Screw mount GigE RJ45
EIAJ (Hirose) 12 pin
Screw mount GigE RJ45
EIAJ (Hirose) 12 pin
Conformity
CE
FCC
RoHS
GigE Vision
GenICam (PoE IEEE 802.3at)
CE
FCC
RoHS
GigE Vision
GenICam (PoE IEEE
802.3at)
DS-CAM-88c / DS-CAM-120c V20-1 5/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
Power specifications
Supply voltage
+8 to +30 VDC
+8 to +30 VDC
Power-over-Ethernet
option
option
Power consumption
3.6 W
3.6 W
Illustration 1: Dimensions
4.2. Connections
On the rear side of the camera there are two connectors. The 12pin HIROSE connector (matching part:
Hirose HR10A10P-12S(73)) contains the power, trigger and other digital pins. Ethernet connector pinout
according to the standard.
DS-CAM-88c / DS-CAM-120c V20-1 6/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
Illustration 2: Connecting scheme
4.2.1. Power/Trigger connector pinout
Illustration 3: 12pin Hirose connector (matching part: Hirose HR10A-10P-12S(73)) on camera rear side
Pin #
Signal
1
GND (for Power and RS232)
2
Power (+8...+30 V DC)
3
-
4
Camera In 1 (TRIGGER)
5
-
6
Camera Out 1 (open emiter, max. 20 mA)
7
Camera In GND
8
RxD (RS232)
DS-CAM-88c / DS-CAM-120c V20-1 7/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
9
TxD (RS232)
10
Camera Out Power (for digital outputs)
11
Camera In 2
12
Camera Out 2
4.2.2. SIRIUS connection example
In this picture you see a typical SIRIUS measurement instrument, consisting of one SBOX unit
(integrated PC) on bottom and one SIRIUS slice on top (from rear side).
The camera is directly connected to the Gigabit-LAN port. The second cable to the camera contains the
power (from SBOX Power out) and the trigger, connected to the SYNC port of the SIRIUS slice. The
camera frames are now in perfect sync with the analog data acquired by DEWESoftTM.
Note: Even if the camera is connected, synching to other SIRIUS devices is still possible, because there
are different pins used on the SYNC port for triggering/synching.
Illustration 4: SIRIUS SBOX with 1 SIRIUS slice connected to the DS-CAM-88c (or DS-CAM-120c) (per cable
H12f-L1B7m-L00B4m-3M)
DS-CAM-88c / DS-CAM-120c V20-1 8/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
4.2.3. Connecting to existing DEWETRON systems
The DS-CAM-120c is also compatible with existing DEWETRON systems.
Please consider the system requirements:
●see chapter System requirements
●DEWETRON instruments must not have DI-ISO option (isolated inputs/outputs)! In this case
clocking is not possible, only free-run (the CLK pin is not available on the connector).
Free-run operation (without clocking, for low framerates) is easy, just connect the camera to the GigE
LAN port.
If you want to trigger the camera, you have to use a special cable for the trigger/clock line. Usually every
DEWETRON instrument is equipped with a 37pin DSUB connector, please see DEWETRON manual for
pinout, here for example is the pinout for the Orion-1622-100 (see Reference List (b)).
●Connect EXT_CLK1 (pin 17) to the CLK of the Lemo 00 connector of the camera (pin 3).
●Connect DGND (pin 37) to GND of the Lemo 00 connector (pin 4)
●Set the pin EXT_CLK1 to “Video” in DEWESoft hardware setup
Illustration 5: DEWETRON Orion-1622-100 DSUB 37 pinout
DS-CAM-88c / DS-CAM-120c V20-1 9/31
DS-CAM-88c / DS-CAM-120c
TECHNICAL REFERENCE MANUAL
Illustration 6: Clockout setup of EXT_CLK1 pin in DEWESoft
4.2.4. Connecting multiple cameras
Illustration 7: CAM-BOX2
DS-CAM-88c / DS-CAM-120c V20-1 10/31
Otros manuales para DS-CAM-88c
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara digital de DEWESOFT
