15
The Design of Your Telephone
Display and MenuCards
Info Line(s)
The first line of the display (the sec-
ond one on the OpenPhone 65)
shows additional current informa-
tion.
There is no defined info line on the
OpenPhone 61. The single line of
the display is used to show informa-
tion when required by the current
state.
In the idle state, the following infor-
mation is displayed in turn when
you press the okey:
•the terminal’s telephone number
and the time,
•activated room monitoring,
•restricted subscriber rights (acti-
vated by the VTel),
•any callback requests, and
•the current call variant.
On the OpenPhone 65, the second
info line shows the day of the week
and the date.
In the connection state, the current
call-charge counter (where active) or
the duration of the call and notes are
displayed. In the enquiry state, the
telephone number of the enquiry call
you dialled is displayed.
Key Lines
The display next to the keys is allo-
cated to these, line by line. Depend-
ing on the key type, the display
texts listed below are shown.
Note: Call and busy states are repre-
sented on the call keys by additional
symbols. Please refer to the section
entitled “Telephoning”.
Note: The OpenPhone 61 does not
have defined key lines. The single
line of the display is used to show
information about keys when
required by the current state.
1Call key in the idle state:
The internal telephone number
or a manually-entered text
2Call key in the dialling or con-
nection state:
The number dialled or the name
of the subscriber called (if this is
in the telephone book)
3A destination key programmed
with a name:
If no name was entered when
programming, then the pro-
grammed telephone number
will appear instead.
Display and MenuCards
14
The Design of Your Telephone
Key Programming
g“Team” Direct Call Key
The “Team” direct call key indicates
whether the other team member is
busy or is being called. This allows
you to take calls for other team
members. In addition, you can use
these keys to call other team mem-
bers directly by just pressing the
key.
gDirect Call Key with
Signalling
Direct call keys with signalling,
which contain a display, can be pro-
grammed by you with an internal or
external telephone number. This is
then dialled by pressing that key.
The display indicates whether the
other internal subscriber is busy or
available, or, in the case of external
telephone numbers, whether an
external line is still available.
g“Partner” Direct Call
Key
By pressing the “Partner” direct call
key, you can call another member of
your team. Your partner also has a
key with which to reach you. The
key indicates whether the line is
busy or free. Calls can be made even
if the partner is busy.
➁
➂
➀
