DESi Proline Series Manual de usuario

P R O L I N E

M E T A L I N E

Home&Office Alarm Systems

USER

MANUAL

WKS / WTKS / WTGKS

WTKS+ / WTGKS+

1 2 3

4 5 6

7 8 9

MENU 0

1236

ENTER

PWR

RFI

AREA

STAY

ARM

DIS

ARM

Maintenance/ Energy Efficiency

Product Contents

Box Contents

1. BASIC SYSTEM OPERATIONS

1.1 Arming the Alarm

1.2 Disarming the Alarm

1.3 Special Arming Type-1

1.4 Special Arming Type-2

1.5 Remote Controller

1.5.1 Special Arming Type-1 With Remote Controller

1.5.2 Special Arming Type-2 With Remote Controller

2. FEATURES OF THE DEVICE

2.1. General Features

2.2. Technicial Specifications

3.2. Reporting Users .............................................................................................................

3.3. Reporting Total Number Of Enrolled Remote Controllers

3.4. Reporting the Number of Passwords Specified

3.5. Stopping Voice Call Feature At Alarming

3.6. Arming / Disarming Alarm via Remote Access

3.7. Additional Device Control Options via Remote Access

4. SETTINGS ...........................................................................................................................

4.1. Password Options ............................................................................................................

4.1.1. Administrator Password ................................................................................................

4.1.2. User Passwords .............................................................................................................

4.1.3. Remote Access Password .............................................................................................

4.1.4. Panic Password .............................................................................................................

4.2. Delay Time During Arming .............................................................................................

4.3. Delay Time Before Alarm ...............................................................................................

4.4. Arming / Disarming Tones Level ...................................................................................

4.5. Auto Arming Options .....................................................................................................

4.6. Outdoor Siren ................................................................................................................

4.7. Programmable Relay

4.8. Wireless Detector Tamper Protection

4.9. Adjusting Sound Alerts For Delay Time

4.10. Zone Programming

4.11. One by One Wireless Zone Programming

4.12. Restore Factory Settings

4.13. Enrolling Remote Controller and Wireless Detector

...........................................................................................

..................................................................................................................

........................................................................................................................

..........................................................................................

..................................................................................................................

..............................................................................................................

..........................................................................................................

.........................................................................................................

...............................................................................................................

...............................................................

..............................................................

............................................................................................

...................................................................................................................

......................................................................................................

........................................................................

3. REPORTING and ADVANCED OPTIONS

3.1. Reporting of Alarm Cause

..............................................................................................

............................................

................................................................

.....................................................................

..............................................................

...................................................

.............................................................................................................

...............................................................................

.............................................................................

............................................................................................................

.........................................................................

.....................................................................................................

.......................................................

6. ALARM MONITORING CENTER CONNECTION SETUPS

6.1. Enable / Disable Calls to Alarm Monitoring Center

6.2. Entering Subscriber Number to Alarm Monitoring Center

6.3. Entering Phone Numbers to Call for Alarm Monitoring Center

6.4. Forwarding Arming / Disarming Notifications to Alarm Monitoring Center

6.5. Entering Personal Phone Numbers

7. GSM MODULE SETTINGS (

For GSM connectable models

)

Installation-1

Installation-2

.........................................................................................

5. VOICE CALLER SETTINGS

5.1. Add / Delete Phone Numbers

5.2. Changing the Voice Message

5.3. Playback Of Recorded Voice Message

5.4. Receiving / Canceling a Dial Tone

5.5. MF / PULSE Call Options

5.6. Secure / Direct Call Selection

5.7. Remote Programming Of Voice Call System

5.8. Restore Factory Settings (for Voice Call Options)

................................................................................

.......................................................................................

.............................................................................

....................................................................................

....................................................................................................

...........................................................................................

..................................................................

..........................................................

.............................................

.......................................................

...........................................

...................................

...............

...................................................................................

...........................................

...............................................................................................................................

Maintenance

-You can clean external surfaces by soft, slightly damp cloth.

Never use abrasive chemicals or water for this purpose. Be

careful not to change the direction of the detectors during

cleaning and do not damage connections and cables.

-Battery life of the wireless detectors may change depending

on the type of detector and daily usage. DESi recommends

replacing these batteries at least once, every 3 years. You can

get help from DESi dealers.

Energy Efficiency

DESi develops custom designs to reduce energy consumption.

Faulty sensors and improper use of system will give false

alarm signals, that may increase the current consumption. In

order to avoid false alarms, the operating manual should read

in detail and any faulty sensors should be repaired or replaced.

M E T A L I N E

Control Panel

P R O L I N E

Control Panel

Wired Magnetic

Contact

DESi

Wired / Wireless

Motion Sensor

Remote

Controller

Wireless

Magnetic Contact

PRODUCT CONTENTS

BOX CONTENTS

M E T A L I N E P R O L I N E

Voice Caller

(GSM Connection Available)

WTKS

WTGKS

WKS

Metal Control Panel

1x Wired Motion Sensor

1x Wired Magnetic Contact

2x Remote Controller

1x Battery

2x Warning Label

Voice Caller

(Landline Connection Available)

Voice Caller

(GSM Connection Available)

WTKS

WTGKS

WKS

Plastic Control Panel

1x Wired Motion Sensor

1x Wired Magnetic Contact

2x Remote Controller

1x Battery

2x Warning Label

Voice Caller

(Landline Connection Available)

The motion detector in WTKS + and WTGKS + is wireless and there is 1 wireless magnetic

contact in the box.

1236

PWR

RFI

PROLINE Indicator LEDs

METALINE Indicator LEDs

PWR Led

1. BASIC SYSTEM OPERATIONS

1.1 Arming the Alarm:

Press <MENU> then <ARM>. The alarm will be activated with a long beep and will be active.

1.2 Disarming the Alarm

Enter your 4-digit password and press <DISARM>. (The factory password is 0000.) The alarm

will be disabled after three short beeps.

1.3 Special Arming Type-1:

Press <MENU> then <STAY>. The alarm will be activated with a long beep and the alarm will

be activated. (In this type of arming, zone 2 is disabled according to the factory settings.)

1.4 Special Arming Type-2:

Press <MENU> first, then press <STAY> 2 times. The alarm will be activated with a long beep

and the alarm will be activated. (In this type of arming, field 3 is disabled according to the

factory settings.)

1.5 Remote Controller:

1.5.1 Special Arming Type-1 With Remote Controller:

First press and then press button.

1.5.2 Special Arming Type-2 With Remote Controller:

First press and then press button 2 times .

Arming Disarming

Enables the alarm silently. Disarm

the alarm and the phone call if

pressed while the siren is

sounding.

Panic Alarm

-Protect all parts of the system from water and heat.

-Your device has a battery that can operate the system for

approximately 2 days to prevent power failures. It is

recommended to replace this battery once, every 2 years.

-If the PWR LED is blink for 2 times in the standby and you hear

buzzer sounds after arming, that means device is not receiving

power. If you hear this warning tone please check the electrical

connection.

-If there is a fault in your system, please contact DESi authorized

technical services as soon as possible. Do not allow to interfere

your device anyone other than the authorized service. Accident,

breakdown, etc. which may occur due to unauthorized services.

DESI is not responsible for that kind of situations.

-The service time of the product is 7 years.

UYARILAR

2. FEATURES OF THE DEVICE

2.1. General Features

ŸYou can use your alarm system with a remote control or password.

ŸYour alarm panel can be used with DESi brand wired and wireless detectors.

ŸIn case of emergency, you can give a panic alarm with remote control.

ŸYou can set the delay time after you have activated your alarm, and you can set the buzzer

to beep during the startup and standby period.

ŸYou can increase or decrease the levels of arming or disarming warning sounds, also you can

activate the system silently with the remote control any time.

ŸYour device notifies power failures with leds.

ŸYour device has a programmable relay output.

ŸIf you wish, the tamper detection can give an alarm even if the system is disarmed.

ŸYour device has a output for a wired smoke detector.

ŸPartial Arming: You can disable some of the detectors. Addition to normal arming, the

system offers 2 different partial arming options. (see 4.10 Programming the Zones)

Ÿ3 Level Delayed Area: When you want to use your system with a password, one or more

detectors can detect while you are going to the keypad to enter the password. In this case,

you can programme your detectors to avoid wrong alarms. (see 4.10 Programming the Zones)

Ÿ24 Hours Active Area: For fire detectors (or for a different reason), you can have some

areas which need to be in control even when the alarm is disarmed. (see 4.10 Programming

the Zones)

ŸPanic Area: You can activate the voice call before the siren rings. (see 4.10 Programming

the Fields)

ŸAuto Arming: Your device is equipped with automatic arming option to prevent accidental

disarming or against forgetting to arm. (see 4.5)

ŸReporting: Your device can report the detectors that caused the alarm, the password(user)

disarmed the alarm, or the total number of remote controllers and passwords in the system.

ŸVoice Call Features (Except WKS model): Your system has a telephone connection. The

device can call up to 6 different phone numbers and leave a 10-second voice message or it

can be monitored every second by the alarm monitoring center. Also you can arm/disarm or

control the relay output of your device by accessing it remotely.

2.2. Technicial Specifications

Operating Voltage: 220 V AC

Battery: 12 Volt DC (4 Ah)

Wireless Device Frequency:: 433.92 Mhz

Wireless Zone Count:32

Remote Control Memory: 8

Password Structure: 1 admin + 7 user + 1

remote access + 1 panic alarm passwords

Wired Zone Count: 6 (programmable)

Maximum Number of Wired Detectors: 10 (The

total current consumption cannot exceed 500 mA.)

Other Connection Features: Programmable

relay, smoke detector output, outdoor siren

output, external keypad connection, PSTN

(landline) and GSM caller (depending on the

model.)

3. REPORTING and ADVANCED OPTIONS

3.1. Reporting of Alarm Cause

When the alarm is disarmed, follow the instructions below to

find out which wired or wireless zone cause the alarm:

[ ADMIN PASSWORD ] → <MENU> → <0> → < 5 >

You could find the cause of the alarm by looking at the indicator of

the device (table below). If the RF.Zone / RFI led is lit, press the

<STAY> button to see which wireless sensor causes an alarm. If you

press <AREA> during reporting, you will see the cause of the

previous alarm. The alarm caused by entering a panic password is not

reported. System keeps the last 8 alarms in memory.

3.2. Reporting Users

If you want to see which user has disarmed the alarm system, follow the instructions below

when the alarm is disarmed:

[ ADMINPASSWORD ] → <MENU> → <0> → < 4 >

By pressing the <AREA> button, you will see the previous user who has disarmed the device.

Your system keeps the last 8 users in memory. Remote access disarm process will not listed.

1236

PWR

RFI

PROLINE Indicator LEDs

Cause For Alarm Display

( / )META PRO

Wired Zone 1

Wired Zone 2

Wired Zone 3

Wired Zone 4

Wired Zone 5

Wired Zone 6

Wiress Zones

1. Zone / 1

2. Zone / 2

3. Zone / 3

4. Zone / 4

5. Zone / 5

6. Zone / 6

RF. Zone /RFI

Display

( / )META PRO

1. Zone / 1

2. Zone / 2

3. Zone / 3

4. Zone / 4

5. Zone / 5

6. Zone / 6

RF. Zone / RFI

RF Zone

Zone 1

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Zone 7

PWR / PWRZone 8

RF Zone

Zone 9

Display

( / )META PRO

(2 times blink)

1. Zone / 1

Zone 17

(3 times blink)

1. Zone / 1

Zone 25

(4 times blink)

1. Zone / 1

STAY

Disarmed User Display

( / )META PRO

Admin Password

1. User Password

2. User Password

4. User Password

5. User Password

6. User Password

1. Zone / 1

2. Zone / 2

3. Zone / 3

4. Zone / 4

5. Zone / 5

6. Zone / 6

RF. Zone / RFI

7. User PasswordiPWR / PWR

3. User Password

Indicator LEDs SOLID

Disarmed User

1. Remote C.

2. Remote C.

3. Remote C.

5. Remote C.

6. Remote C.

7. Remote C.

8. Remote C.

4. Remote C.

Indicator LEDs BLINKS

Display

( / )META PRO

1. Zone / 1

2. Zone / 2

3. Zone / 3

4. Zone / 4

5. Zone / 5

6. Zone / 6

RF. Zone / RFI

PWR / PWR

METALINE Indicator LEDs

PWR

Led

-If “ # ” button is pressed, the phone call will be stopped. The system does not call other

phone numbers.

- If “ * ” button pressed, the system will call the next phone number.

-If phone closed without pressing any buttons, system will call other phone numbers and then

call back to main number. (voice call could not stopped by other called numbers)

If you want to stop calls with your remote control, press that button

3.6 Arming / Disarming Alarm via Remote Access

( Voice Call Module Included Models

Only)

Dial the phone number connected to device and ring 5 times. After the fifth ring, the system

automatically answers the call and the buzzer sounds will hear then remote access password

has to entered from the phone key pad. When you hear confirming tone, the alarm will be

armed by pressing the button “1” or by pressing button“0” the alarm wil be disarmed.

3.7. Additional Device Control Options via Remote Access

( Voice Call Module Included

Models Only)

You can control a device like boiler, lighting, etc. connected to your system with an optional

module. The output of the optional module should connect to supply input of the device.

Dial the phone number connected to device and ring 5 times. After the fifth ring, the system

automatically answers the call and the buzzer sounds will hear then remote access

password has to entered from the phone key pad. When you hear confirming tone, the extra

equipment is actived by pressing the button “2” or by pressing button “3” the extra

equipment is deactivated.

3.3. Reporting Total Number Of Enrolled Remote Controllers

If you want to learn how many remote controller have been enrolled to your system,

follow the instructions below when the alarm is disabled:

[ ADMIN PASSWORD ] → <MENU> → <0> → < 1 >

The number of controls enrolled to the device will be

reported as shown in the table. The device

automatically exits the program after reporting.

The device can recognize maximum 8 remote

controllers.

3.4. Reporting the Number of Passwords:

To learn the number of passwords defined, follow the

instructions below when the alarm is disabled:

[ ADMIN PASSWORD ] → <MENU> → <0> → < 2 >

The number of passwords defined will be reported as

shown in the table above. The device automatically exits

the program after reporting. The device can recognize

maximum 8 paswords.

3.5. Stopping Voice Call Feature At Alarming:

Defined Password / Remote Controllers

4. SETTINGS

4.1. Password Options

4.1.1. Administrator Password: Administrator password has administrative rights like, defining

user passwords, changing settings, setting zones and reporting. This password also arm/disarm

the system. The factory default administrator password is [0000]. To change this password,

follow the instructions below when the alarm is disarmed:

[ADMIN PASS.] → < MENU> → <5> → <0> → [ NEW PASS.] → <AREA> → [NEW PASS. ] → < AREA>

After this steps, the buzzer will give a warning tone and the administrator password will be

changed.

4.1.2. User Passwords: Passwords that can be used to disarm the device. You can specify up to

7 different user passwords. Follow the instructions below when the alarm is disarmed: Setting

the 1.User Password

[ADMIN PASS.] → <MENU> → <5> → <1> → [NEW PASS.] → <AREA> → [NEW PASS.] → <AREA>

Setting the 5.User Password

[ADMIN PASS.] → <MENU> → <5> → <5> → [NEW PASS.] → <AREA> → [NEW PASS.] → <AREA>

4.1.3. Remote Access Password (Voice Call Module Included Models Only): You can remotely

arm, disarm, and control the extra output of your device by accessing your system via

telephone. To define this password, follow the instructions below when the alarm is disarmed:

[ADMIN PASS.] → <MENU> → <4> → TONE → <MENU> → <9> → [NEW PASS] → <ENTER>

To deactivate the remote access feature, press <ENTER> without entering a new password.

4.1.4. Panic Password: This password is used when malicious people want to disarm the alarm

by threat. If the system has been disarmed with a panic password, it will call the phone

numbers which entered at setup. (silently - without siren louds). This feature only available in

voice caller module included models. To define this password, follow the instructions below

when the alarm is disabled:

[ADMIN PASS.] → <MENU> → <5> → <8> → [NEW PASS.] → <AREA> → [NEW PASS.] → <AREA>

After this steps, the buzzer will give a warning tone and the panic password will be set.

4.2. Delay Time During Arming:

That is time to exit when the alarm is armed. Factory default timing is 15 seconds. If you want

to change this, follow the instructions below when the alarm is disabled:

[ADMIN PASS.] → <MENU> → <8> → <1> → [NEW DELAY TIME - In Seconds] → <STAY>

After this steps, the buzzer will give a warning tone and new delay time will be set.

-You can define 1 administrator, 7 users, 1 remote access and 1

panic password to your system.

-For your safety please change the factory default password.

-All passwords must be 4 digits.

WARNING

4.3. Delay Time Before Alarm

When the system is armed, there is 15-second delay time for disarming the system with

your password. If you want to change the time, follow the instructions below when the

alarm is disarmed:

[ADMIN PASS.] → <MENU> → <8> → <2> → [NEW DELAY TIME - In Seconds] → <STAY>

After this steps, the buzzer will give a warning tone and new delay time will be set.

4.4. Arming / Disarming Tones Level

Arming and disarming warning sounds can be set to 3 different levels, low, normal and high.

To adjust the level, follow the instructions below when the alarm is disarmed:

[ADMIN PASS.] → <MENU> → <6> → VIEW THE INDICATOR.

Press <STAY> after you have finished your choice.

After this steps, the buzzer will give a warning tone and sound level will be set. The volume

level of the siren is not affected by this setting.

4.5. Auto Arming Options:

For setting auto arming mode, follow the instructions below when the alarm is disarmed:

[ADMIN PASS.] → <MENU> → <6> → VIEW THE INDICATOR.

4.6. Outdoor Siren

Adjusting the settings for the outdoor siren, follow the instructions below when the alarm is

disarmed: [ADMIN PASS.] → <MENU> → <6> → VIEW THE INDICATOR

Press <STAY> after you have finished your choice.

After this steps, the buzzer will give a warning tone and your choice will be active.

Feature Display (META / PRO) Choice

1. Zone / 1 solid means

enable, not means disable

Press <1> to

select.

When the alarm is armed, the outdoor

siren will be activated against tamper

2. Zone / 2 solid means

enable, not means disable

Press <2> to

select.

If the alarm is disarmed, the outdoor

siren will be activated against tamper

3. Zone / 3 solid means

enable, not means disable

Press <3> to

select.

Outdoor siren will give warning tones

when Arming/Disarming alarm.

4. Zone / 4 solid means

enable, not means disable

Press <4> to

select.

When panic alarm activated by remote

controller, outdoor siren will be activate.

6. Zone / 6 solid means

armed, not disarmed Press <6> to select and then

press <STAY>.

Status Display (META / PRO) Choice

Arm if there is no

movement 60 seconds

RF Zone / RFI solid means

armed, not disarmed Press <7> to select and then

press <STAY>.

Arm if there is no

movement 30 minutes

Normal Level

Low Level

High Level

5. Zone / 5 ve PWR / PWR no light

5. Zone / 5 solid

PWR / PWR solid

Press <5> for low and <8> for High.

Press <5> for Normal and <8> for High.

Press <8> for Normal and <5> for Low.

Status Display (META / PRO) Choice

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de seguridad de DESi

DESi

DESi MIDLINE Manual de usuario

DESi

DESi Smartline Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario