DEPURECO FOX Series Manual de usuario

DEPURECO INDUSTRIAL VACUUMS S.r.l. - Via Perosi, 3 - 10040 Volvera (TO) - ITALY

tel. +39 011 98 59 117 - fax +39 011 98 59 326 - e-mail depureco@depureco.com

www.depureco.com - Tax Code and VAT No. 02258610357

Single document of 46 pages.

This manual is an integral part of the vacuum.

Carefully read this manual and its attachments. Knowing the instructions contained in it is

crucial for using the vacuum and carry out maintenance operations under full safety

conditions. rev. A dated 14 December 2011

INCLUDES CE DECLARATION OF CONFORMITY

Controlled Air Design

[email protected]

www.controlledairdesign.com

(919)607-6765

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 2 of 46

CE DECLARATION OF CONFORMITY

(for machines not included in Annex IV)

The Manufacturer

DEPURECO INDUSTRIAL VACUUMS S.r.l. - Via Perosi, 3 - 10040 Volvera (TO) - ITALY

tel. +39 011 98 59 117 - fax +39 011 98 59 326 - e-mail depureco@depureco.com

www.depureco.com - Tax Code and VAT No. 02258610357

declares

under its own responsibility that the vacuum model

described in this manual

Year of manufacture:

to which this declaration refers, complies with the essential safety requirements of Machinery Directive

2006/42/EC, Directive 2004/108/EC concerning electromagnetic compatibility and Directive 2006/95/EC

concerning low voltage.

The Standards taken as reference to design, manufacture and test the vacuum are listed in the technical file

available at DEPURECO S.r.l.

This declaration shall no longer be valid in the event of changes to the vacuum made without the

Manufacturer's authorisation.

Turin,15 March 2012 The Legal Representative

(Marco DEVINCENTIS)

[original signed document]

Space for the application of the identification data label

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 3 of 46

CONTENTS

INFORMATIVE SECTION

……………………………………………………………...

1.0 Preface ………………………………………………………………………………....... 4

1.1 Identification of the main parts ……………………………………………………....... 6

1.2 Options …………………………………………………………………………………... 7

1.3 Manufacturer's identification data …………………………………………………...... 7

1.4 Identification plate ………………………………………………………………………. 8

1.5 Intended use …………………………………………………………………………...... 8

1.6 Allowed environmental conditions …………………………………………………….. 8

1.7 Noise level ……………………………………………………………………............... 8

1.8 Technical data …………………………………………………………………………... 9

1.9 Warranty …………………………………………………………………………………. 10

SAFETY SECTION

……………………………………………………………...

..........

2.1 Information on safety ……………………………………………………………........... 11

2.2 Safety requirements……………………………………………………………............. 12

2.3 Safety plates and symbols..................................................................................... 13

2.4 Residual risks ……………………………………………………………………………. 16

2.5 Applied Directives ………………………………………………………………………. 16

HANDLING, UNPACK

ING AND INSTALLATION SECTION

……....

..................

3.1 Handling ….…………………………………………………………………….............. 17

3.2 Unpacking ……………………………………………………………………………...... 18

3.3 Installation .……………………………………………………………………………..... 19

OPERATION SECTIO

……………………………………………………………..

...

4.1 Description of the controls ……………………………………………………………... 22

4.2 Operating cycle ………………………………………………………………………….. 23

4.3 Emptying the refuse container ........…………………………………………………… 28

4.4 Inserting and locking the refuse container ........……………………………………… 30

4.5 Storage - decommissioning ………......................………………………………….... 30

MAINTENANCE SECTION

…………………………………………………………...

5.1 Information notes ……………………………………………………………………….. 31

5.2 General safety regulations …………………………………………………………….. 32

5.3 Replacing the filter ……………………………………………………………………... 33

5.4 Replacing the filter cartridge - (optional CCA)……..........…………………………... 36

5.5 Positioning the thermal relay and fuses (FOX 10) ………….........…………………. 40

5.6 Troubleshooting ………...............……………………………………………………… 42

5.7 Wear materials ……...…………………………………………………………………... 43

5.8 Scrapping ….....………………………………………………………………………….. 43

IMPORTANT - The DEPURECO name and logo used in this document refer to and are property of

DEPURECO INDUSTRIAL VACUUMS S.r.l.

This document is exclusive property of DEPURECO S.r.l. Full or partial reproduction by any means (graphic,

electronic, etc.) is prohibited without prior authorisation by the Company Management.

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 4 of 46

INFORMATION SECTION

1.0 Preface

Dear Customer

Congratulations on purchasing a FOX series DEPURECO vacuum. Thank you for choosing us.

We have prepared this manual to allow you to fully appreciate the qualities of this machine.

We recommend reading it carefully before using it for the first time.

It includes information, recommendations and important warnings concerning the use of the vacuum, which

will help fully exploiting the technical properties of your machine.

We recommend reading carefully the messages, warnings and indications preceded by the following

symbols:

for personal safety;

for vacuum integrity;

for environmental protection.

This vacuum has been designed for extracting dust and processing residues. The vacuum is installed on

sturdy casters, one of which is equipped with a brake to hold it in place.

It is equipped with a vacuum meter to indicate the conditions of the filter: an increase in negative pressure

indicates increased filter clogging, with a reduction of the suction power as a result.

The materials extracted through cyclone effect tend to settle on the bottom of the container; the finer dust

particles contained in the mixture will settle on the filtering surface inside the chamber.

This manual describes the following models:

FOX 3

FOX 5,5 P

FOX 5,5 S

FOX 7.5 P

FOX 7.5 S

FOX 10

The vacuum can be equipped with the following filters:

qM FILTER

For greater filtering capacity,the M filter can be integrated with an H FILTER (or absolute filter).

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 5 of 46

These vacuums are classified according to the following dust classes:

medium risk - suitable for separating dust with an exposure limit value of > 0.1 mg/m

depending on the occupied volume.

high risk - suitable for separating all dusts with any exposure limit value, depending on the

occupied volume, including carcinogenic and pathogenic dusts.

This manual provides all the necessary information for the use and maintenance of your vacuum.

This specific model has undergone strict testing to ensure maximum reliability. Its operation and durability

will depend on proper use and maintenance.

This manual is integral part of the vacuum and must accompany it at all times, until its demolition.

In the event it is lost or damaged, you can request another copy from DEPURECO INDUSTRIAL VACUUMS

S.r.l. (hereafter simply called DEPURECO).

The technical information contained in this manual is exclusive property of DEPURECO and must be

considered confidential.

Reproduction, even partial, of graphics, text and illustrations is prohibited by law.

Some details shown in the figures in this manual can differ from those on your vacuum; this is because some

components can be removed to ensure maximum clarity.

For easier consultation, this manual is divided into sections that are identified by a specific graphic symbol.

The topics covered in this manual are those expressly required by Machinery Directive 2006/42/EC and the

technical data are taken from the technical file archived at DEPURECO.

In compliance with Regulation 1907/2006/EC (REACH), DEPURECO declares that its products do not

contain any Substances of Very High Concern (SVHC) included in the Candidate List.

This manual must be kept in a place that can be easily accessed by the personnel in charge of running and

maintaining the machine.

Any dispute will be heard by the Court of Turin (Italy).

This manual must accompany the vacuum even in the event it is sold !

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 6 of 46

1.1 Identification of the main parts

2) On/off control

3) Cover

4) Filter shaker knob

5) Filter chamber

6) Extracted refuse container

7) Refuse container locking/release lever

8) Suction hose inlet

9) Fixed casters

9) carry handles

10) Swivel casters with brake

11) Accessory container

12) Electrical / control panel (FOX 10)

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 7 of 46

1.2 Options

DEPURECO provides a wide range of optional accessories, according to the application of the vacuum.

1.3 Manufacturer's identification data

DEPURECO INDUSTRIAL VACUUMS S.r.l.

Via Perosi, 3 - 10040 Volvera (TO) - ITALY

tel. +39 011 98 59 117

fax +39 011 98 59 326

e-mail: depureco@depureco.com

website: www.depureco.com

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 8 of 46

1.4 Identification plate

The data on the vacuum identification plate must be referred to in any communication with the manufacturer

or the dealer.

1.5 Intended use

This model has been designed, manufactured and protected solely for professional industrial extraction of

non-flammable and non-toxic dry dust.

For hazardous Zone 22 dusts, request the B1 version from DEPURECO.

If equipped with a special filter and float, the vacuum can also be used to extract non-flammable and non-

corrosive liquids.

Any other use is considered IMPROPER.

1.6 Allowed environmental conditions

To ensure proper operation, the vacuum must be protected from weather agents (Rain, hail, snow, fog,

suspended powders, etc.) at a room temperature ranging between 5 and 45 °C and a humidity below 70%.

The work environment must be clean, suitably lit and must not give rise to explosive atmosphere.

1.7 Noise level

Photometric tests carried out on these specific models have shown a sound pressure level of

FOX 3

74 dB(A)

FOX 5,5 P

FOX 5,5 S

76 dB(A)

FOX 7.5 P

FOX 7.5 S

76 dB(A)

FOX 10

70 dB(A)

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 9 of 46

Attention!

For sound pressure levels above 85 dB(A), exposed workers must wear suitable

personal protective equipment (PPE), such as type-approved individual hearing

protection.

Under these conditions, workers must be provided with adequate training and

information on risks arising from noise exposure.

1.8 Technical data

U.M.

FOX 3

FOX 5,5 P

FOX 5,5 S

FOX 7.5 P

FOX 7.5 S

FOX 10

Weight*

Kg/Lb

140/309

155/342

175/386

172/379

240/529

Overall dimensions*

Cm/Ft

121x65x152

3,96x2,13x4,99

121x65x152

3,96x2,13x4,99

121x65x152

3,96x2,13x4,99

128x65x183

4,20x2,13x6

Supply voltage

400/500*

Power

KW - Hp

2,2 - 3

4 - 5,5

5,5 - 7,5

7,5 - 10

Maximum negative

pressure

mmH

O/Inc.

3.300/10

3.000/10

5.100/15

3.200/9,50

5.300/15,7

4.600/14

Air flow rate

l/min/Cfm

5.200/184

8.000/283

5.300/188

8.000/283

5.300/188

8.800/311

M filter surface

/Ft

2,4/25

4,5/49

H filter surface

/Ft

2,1/22,6

Noise level

dB-A

Container capacity

l/Gal

100/27

Vacuum inlet diameter

mm/Inc

80/3,15

* 500 V upon request

(*) without packaging - packaging weight = 18 Kg

INDUSTRIAL VACUUMS

FOX Series

USE AND MAINTENANCE MANUAL

FOX series Manual rev. A page 10 of 46

1.9 Warranty

DEPURECO guarantees this model for 12 months from the date of purchase indicated in the receipt upon

delivery of the product from the dealer.

The warranty is null and void in the event that the vacuum is repaired by unauthorised third parties,

equipment, accessories or components not supplied or not authorised by DEPURECO are used or the serial

number is removed (during the warranty period).

During the warranty period, DEPURECO undertakes to repair or replace free of charge parts and

components, which prove to have manufacturing defects.

Repairs are made solely at our premises or in specific Service centres and must be delivered ex works

(transport costs are charged to the purchaser, unless otherwise agreed upon).

The warranty does not cover cleaning of operating elements.

The purchase receipt must be shown to the authorised technical personnel carrying out the repair and must

accompany the vacuum during its shipment.

Defects that are not evidently due to materials or manufacturing will be examined solely at our premises or at

a specific Technical Service Centre.

Should the complaint be unjustified, all repair and/or replacement expenses shall be charged to the

purchaser.

In any event, the following are not covered by warrantee: accidental damage due to transport, negligence,

abnormal use, improper use, non-compliance with the instructions contained in this booklet or arising from

phenomena that do not depend on normal use/operation of the vacuum.

DEPURECO shall not be held liable for any injuries to persons or damage to objects caused by misuse or

improper use of the vacuum.

Any dispute will be heard by the Court of Turin (Italy).

To benefit from the warranty, photocopy the form in the last page of this manual, fill it in

(possibly in block capital letters) and fax it to DEPURECO at +39 011 9859 326

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Aspiradora de DEPURECO

DEPURECO

DEPURECO XM 20T Series Instrucciones de uso

DEPURECO

DEPURECO ATEX Z22 II3D Instrucciones de uso

DEPURECO

DEPURECO M Series Instrucciones de uso

DEPURECO

DEPURECO ECOBULL AM Series Instrucciones de uso

DEPURECO

DEPURECO AC 65 Manual de usuario

DEPURECO

DEPURECO PUMA Series Instrucciones de funcionamiento

DEPURECO

DEPURECO BULL Series Instrucciones de uso

DEPURECO

DEPURECO MINI BULL Series Instrucciones de uso

DEPURECO

DEPURECO DF Series Instrucciones de uso

DEPURECO

DEPURECO RAM OIL 250 Instrucciones de uso

DEPURECO

DEPURECO TB Series Instrucciones de uso

DEPURECO

DEPURECO M70 OIL Guía

DEPURECO

DEPURECO DF Series Instrucciones de uso

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario