/ Pairing Camera to Wi-Fi Remote
A. ON THE CAMERA:
1. Ensure both camera and
remote are powered OFF.
2. Press the Power/Mode Button
[ ] to power camera ON.
3. Press the Wi-Fi On/Off Button
[ ] twice, then press the
Shutter/Select Button [ ] to
enter the Wi-Fi menu [ ].
4. Press the Power/Mode Button
[ ] to cycle to Wi-Fi RC, then
press the Shutter/Select Button
[ ] to select it.
5. Press the Power/Mode Button
[ ] to cycle to NEW, then
press the Shutter/Select Button
[ ] to select it. You will see
[ ].
B. ON THE WIFI REMOTE:
1. While holding down the Shutter/
Select Button [ ], press and
release the Power/Mode Button
[ ].
2. When you see [ ], release
the Shutter/Select Button [ ].
3. [ ] will appear once camera
and remote have paired.
4. The remote will now prompt
CONNECT ANOTHER? camera.
If you want to connect additional
cameras at this time, press the
Shutter/Select Button [ ]
to select YES. If not, press the
Power/Mode Button [ ] to
cycle to NO, then press the
Shutter/Select Button [ ] to
select it.
Before using the Wi-Fi Remote for the first time, you must pair it
with your camera.
