Delta DVP-15MC Series Manual de usuario

www.deltaww.com

DVP-15MC Series

Motion Controller

Operation Manual

DVP-15MC Series Motion Controller Operation Manual

2020-01-13

Industrial Automation Headquarters

Delta Electronics, Inc.

Taoyuan Technology Center

No.18, Xinglong Rd., Taoyuan City,

Taoyuan County 33068, Taiwan

TEL: 886-3-362-6301 / FAX: 886-3-371-6301

Asia

Delta Electronics (Jiangsu) Ltd.

Wujiang Plant 3

1688 Jiangxing East Road,

Wujiang Economic Development Zone

Wujiang City, Jiang Su Province, P.R.C. 215200

TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290

Delta Greentech (China) Co., Ltd.

238 Min-Xia Road, Pudong District,

ShangHai, P.R.C. 201209

TEL: 86-21-58635678 / FAX: 86-21-58630003

Delta Electronics (Japan), Inc.

Tokyo Ofce

2-1-14 Minato-ku Shibadaimon,

Tokyo 105-0012, Japan

TEL: 81-3-5733-1111 / FAX: 81-3-5733-1211

Delta Electronics (Korea), Inc.

1511, Byucksan Digital Valley 6-cha, Gasan-dong,

Geumcheon-gu, Seoul, Korea, 153-704

TEL: 82-2-515-5303 / FAX: 82-2-515-5302

Delta Electronics Int’l (S) Pte Ltd.

4 Kaki Bukit Ave 1, #05-05, Singapore 417939

TEL: 65-6747-5155 / FAX: 65-6744-9228

Delta Electronics (India) Pvt. Ltd.

Plot No 43 Sector 35, HSIIDC

Gurgaon, PIN 122001, Haryana, India

TEL : 91-124-4874900 / FAX : 91-124-4874945

Americas

Delta Products Corporation (USA)

Raleigh Ofce

P.O. Box 12173,5101 Davis Drive,

Research Triangle Park, NC 27709, U.S.A.

TEL: 1-919-767-3800 / FAX: 1-919-767-8080

Delta Greentech (Brasil) S.A.

Sao Paulo Ofce

Rua Itapeva, 26 - 3° andar Edicio Itapeva One-Bela Vista

01332-000-São Paulo-SP-Brazil

TEL: 55 11 3568-3855 / FAX: 55 11 3568-3865

Europe

Delta Electronics (Netherlands) B.V.

Eindhoven Ofce

De Witbogt 20, 5652 AG Eindhoven, The Netherlands

TEL : +31 (0)40-8003800 / FAX : +31 (0)40-8003898

DVP-0191920-02

*We reserve the right to change the information in this manual without prior notice.

DVP-15MC Series Motion Controller

Operation Manual

Table of Contents

Chapter 1 Preface

1.1 Explanation of Symbols in This Manual ......................................................1-2

1.2 Revision History .........................................................................................1-2

Chapter 2Overview

1.1 Product Description....................................................................................2-2

1.2 Functions ...................................................................................................2-2

1.3 Profile and Components .............................................................................2-3

Chapter 3 Specifications

3.1 Function Specifications ..............................................................................3-2

3.1.1 Specifications............................................................................................ 3-2

3.1.2 Devices and Data Types.............................................................................. 3-3

3.1.2.1 Devices.............................................................................................. 3-3

3.1.2.2 Valid Ranges of Devices ....................................................................... 3-4

3.1.2.3 Latched Devices.................................................................................. 3-5

3.1.2.4 Data Types and Valid Ranges Supported ................................................ 3-6

3.2 Electrical Specifications .............................................................................3-7

Chapter 4 System Architecture

4.1 System Constitution...................................................................................4-2

4.2 Power Supply .............................................................................................4-2

4.3 Left-side Extension ....................................................................................4-2

4.3.1 Connectable Left-side Extension Module .................................................... 4-2

4.3.2 Allocation of Left-side Network Module Addresses....................................... 4-3

4.3.3 Method of Reading/Writing of Left-side Modules ......................................... 4-3

4.4 Right-side Extension ..................................................................................4-3

4.4.1 Connectable Right-side Extension Modules................................................. 4-3

4.4.2 Allocation of Right-side Extension Module Addresses................................... 4-4

4.5 Connectable Servo Drives ..........................................................................4-5

4.6 SD Memory Card ........................................................................................4-7

4.6.1 Model and Specification........................................................................... 4-7

Chapter 5 Installation

5.1 Dimensions ................................................................................................5-2

5.1.1 Profile and Dimensions............................................................................ 5-2

5.1.2 Dimensions of Left-side and Right-side Extension Modules........................... 5-2

5.1.3 Connecting to the Left-side Extension Module ............................................ 5-3

5.1.4 Connecting to the Right-side Extension Module .......................................... 5-4

5.1.5 Installing and Removing the SD Card........................................................ 5-5

5.2 Installing the Module in the Control Cabinet..............................................5-7

5.2.1 Installing the Module to DIN rail............................................................... 5-7

5.2.2 Illustration of Installation Inside the Control Cabinet................................... 5-7

5.2.3 Environmental Temperature in the Control Cabinet..................................... 5-7

5.2.4 Actions for Anti-interference .................................................................... 5-8

5.2.5 Dimension Requirement in the Control Cabinet .......................................... 5-8

Chapter 6 Wiring, Communication Setting and Network Construction

6.1 Wiring ........................................................................................................6-3

6.1.1 Power Supply......................................................................................... 6-3

6.1.2 Safety Circuit Wiring............................................................................... 6-4

6.2 Input Point and Output Point Wiring..........................................................6-5

6.2.1 Function that Input Points Support ........................................................... 6-5

6.2.2 Input Point Wiring .................................................................................. 6-6

6.2.3 Output Point Wiring ................................................................................ 6-8

6.3 RS-485 Communication Port ......................................................................6-9

6.3.1 Function that RS-485 Port Supports.......................................................... 6-9

6.3.2 Definitions of RS-485 Port Pins................................................................. 6-9

6.3.3 RS-485 Hardware Connection .................................................................. 6-9

6.3.4 Supported Function Codes and Exception Codes........................................6-10

6.4 RS-232 Communication Port ....................................................................6-11

iii

6.4.1 Function that RS-232 Port Supports........................................................ 6-11

6.4.2 Definitions of RS-232 Port Pins............................................................... 6-11

6.4.3 RS-232 Hardware Connection ................................................................ 6-12

6.4.4 Supported Function Codes and Exception Codes....................................... 6-12

6.5 SSI Absolute Encoder Port .......................................................................6-13

6.5.1 Function of SSI Absolute Encoder ........................................................... 6-13

6.5.2 Definitions of SSI Port Pins .................................................................... 6-13

6.5.3 SSI Absolute Encoder Hardware Connection............................................. 6-14

6.6 Incremental Encoders ..............................................................................6-15

6.6.1 Function of Incremental Encoder ............................................................ 6-15

6.6.2 Definition of Incremental Encoder Port Pins.............................................. 6-15

6.6.3 Incremental Encoder Hardware Connection.............................................. 6-16

6.7 Ethernet Communication Port ..................................................................6-17

6.7.1 Function that Ethernet Communication Port Supports................................ 6-17

6.7.2 Pins of Ethernet Communication Port ...................................................... 6-17

6.7.3 Network Connection of Ethernet Communication Port................................ 6-17

6.7.4 Function Codes that Ethernet Communication Port Supports ...................... 6-18

6.8 Motion Communication Port .....................................................................6-18

6.8.1 Function that Motion Communication Port Supports .................................. 6-18

6.8.2 Pins of Motion Communication Port......................................................... 6-18

6.8.3 Motion Network Connection ................................................................... 6-19

6.8.4 Communication Speed and Communication Distance................................. 6-19

6.9 CANopen Communication Port..................................................................6-20

6.9.1 Functions that CANopen Communication Port Supports ............................. 6-20

6.9.2 Pins of CANopen Communication Port...................................................... 6-21

6.9.3 PDO Mapping at CANopen Communication Port ........................................ 6-21

6.9.4 Network Connection at CANopen Communication Port............................... 6-21

6.9.5 CANopen Communication Rate and Communication Distance ..................... 6-22

Chapter 7 Execution Principle

7.1 Tasks..........................................................................................................7-2

7.1.1 Task Types ............................................................................................ 7-2

7.1.2 Priority levels of Tasks ............................................................................ 7-4

7.1.3 Watchdog for a Task............................................................................... 7-6

7.1.4 Motion Instructions for Each Task Type ..................................................... 7-7

7.2 The Impact of PLC RUN or STOP on Variables and Devices.........................7-8

7.3 Relationship between Motion Program and Motion Bus..............................7-8

7.4 Synchronization Cycle Period Setting.........................................................7-9

Chapter 8 Logic Instructions

Table of Logic Instructions.........................................................................8-6

Explanation of Logic Instructions.............................................................8-10

8.2.1 EN and ENO .............................................................................................8-10

Sequence Input /Output Instructions......................................................8-10

8.3.1 R_TRIG ...................................................................................................8-10

8.3.2 F_TRIG....................................................................................................8-12

8.3.3 RS ..........................................................................................................8-14

8.3.4 SR ..........................................................................................................8-16

8.3.5 SEMA ......................................................................................................8-18

Sequence Control Instructions.................................................................8-20

8.4.1 JMP.........................................................................................................8-20

Data Movement Instructions....................................................................8-21

8.5.1 MOVE......................................................................................................8-21

8.5.2 MoveBit...................................................................................................8-22

8.5.3 TransBit ..................................................................................................8-24

8.5.4 MoveDigit ................................................................................................8-26

8.5.5 Exchange.................................................................................................8-28

8.5.6 Swap ......................................................................................................8-30

Comparison Instructions..........................................................................8-32

8.6.1 LT8-32

8.6.2 LE8-34

8.6.3 GT ..........................................................................................................8-36

8.6.4 GE ..........................................................................................................8-38

8.6.5 EQ ..........................................................................................................8-40

8.6.6 NE ..........................................................................................................8-42

Timer Instructions ...................................................................................8-44

8.7.1 TON ....................................................................................................... 8-44

8.7.2 TOF........................................................................................................ 8-46

8.7.3 TP8-48

8.7.4 Sys_ReadTime......................................................................................... 8-50

8.7.5 Sys_ReadTotalWorkTime .......................................................................... 8-51

8.7.6 Sys_ReadPowerOnTime ............................................................................ 8-52

8.7.7 Sys_WdgStatus ....................................................................................... 8-53

Counter Instructions ................................................................................8-55

8.8.1 CTU ....................................................................................................... 8-55

8.8.2 CTD ....................................................................................................... 8-57

8.8.3 CTUD ..................................................................................................... 8-59

Math Instructions.....................................................................................8-62

8.9.1 ADD....................................................................................................... 8-62

8.9.2 SUB ....................................................................................................... 8-65

8.9.3 MUL ....................................................................................................... 8-68

8.9.4 DIV........................................................................................................ 8-71

8.9.5 MOD ...................................................................................................... 8-74

8.9.6 MODREAL ............................................................................................... 8-76

8.9.7 MODTURNS............................................................................................. 8-78

8.9.8 MODABS................................................................................................. 8-80

8.9.9 ABS ....................................................................................................... 8-82

8.9.10 DegToRad............................................................................................ 8-84

8.9.11 RadToDeg............................................................................................ 8-86

8.9.12 SIN..................................................................................................... 8-88

8.9.13 COS.................................................................................................... 8-90

8.9.14 TAN .................................................................................................... 8-92

8.9.15 ASIN................................................................................................... 8-94

8.9.16 ACOS.................................................................................................. 8-96

8.9.17 ATAN .................................................................................................. 8-98

8.9.18 LN .....................................................................................................8-100

8.9.19 LOG...................................................................................................8-102

8.9.20 SQRT .................................................................................................8-104

8.9.21 EXP ...................................................................................................8-106

8.9.22 EXPT..................................................................................................8-108

8.9.23 RAND.................................................................................................8-110

8.9.24 TRUNC...............................................................................................8-112

8.9.25 FLOOR ...............................................................................................8-114

8.9.26 FRACTION ..........................................................................................8-116

Bit String Instructions ...........................................................................8-118

8.10.1 AND...................................................................................................8-118

8.10.2 OR.....................................................................................................8-121

8.10.3 NOT...................................................................................................8-124

8.10.4 XOR...................................................................................................8-126

8.10.5 XORN.................................................................................................8-129

Shift Instructions...................................................................................8-132

8.11.1 SHL ...................................................................................................8-132

8.11.2 SHR...................................................................................................8-134

8.11.3 ROL...................................................................................................8-136

8.11.4 ROR...................................................................................................8-138

Selection Instructions............................................................................8-140

8.12.1 MAX...................................................................................................8-140

8.12.2 MIN ...................................................................................................8-142

8.12.3 SEL ...................................................................................................8-145

8.12.4 MUX ..................................................................................................8-147

8.12.5 LIMIT.................................................................................................8-149

8.12.6 BAND.................................................................................................8-151

8.12.7 ZONE.................................................................................................8-154

Data Type Conversion Instructions ........................................................8-157

8.13.1 BOOL_TO_*** ....................................................................................8-157

8.13.2 Bit strings_TO_***..............................................................................8-160

8.13.3 Integers_TO_*** ................................................................................8-167

8.13.4 Real numbers_TO_***.........................................................................8-176

8.13.5 Times,dates_TO_*** ...........................................................................8-179

8.13.6 Strings_TO_***..................................................................................8-181

Communication Instructions..................................................................8-184

8.14.1 CANopen Communication Instructions....................................................8-184

8.14.1.1 DMC_ReadParameter_CANopen .........................................................8-184

8.14.1.2 DMC_WriteParameter_CANopen.........................................................8-189

8.14.2 Ethernet Instructions ...........................................................................8-193

vii

8.14.2.1 ETH_Link_Config..............................................................................8-193

8.14.2.2 ETH_Link_Manage............................................................................8-198

8.14.2.3 ETH_Link_Status..............................................................................8-199

8.14.2.4 MODBUS TCP Data Exchange Example................................................8-202

8.14.2.5 ETH_Link_Config_Ext........................................................................8-209

8.14.2.6 ETH_ SetServerlinkkeeptime..............................................................8-211

8.14.2.7 ETH_Socket_Manage ........................................................................8-212

8.14.2.8 ETH_Socket_Config ..........................................................................8-214

8.14.2.9 ETH_Socket_Open............................................................................8-217

8.14.2.10 ETH_Socket_Send.........................................................................8-219

8.14.2.11 ETH_Socket_Receive.....................................................................8-223

8.14.2.12 ETH_Socket_Close ........................................................................8-227

8.14.2.13 ETH_Socket_Status.......................................................................8-229

8.14.2.14 Ehternet Free Protocol Example......................................................8-232

8.14.3 RS485 Communication Instructions .......................................................8-237

8.14.3.1 RS485_Link_Manage ........................................................................8-237

8.14.3.2 RS485_Link_Config ..........................................................................8-239

8.14.3.3 RS485_Link_Status..........................................................................8-243

8.14.3.4 RS485 Data Exchange Example..........................................................8-246

8.14.3.5 RS485_RS.......................................................................................8-249

8.14.3.6 RS485 Free Protocol Example ............................................................8-255

8.14.3.7 RS485_SetDelayTime .......................................................................8-259

8.14.4 RS232 Communication Instructions .......................................................8-261

8.14.4.1 RS232_Link_Manage ........................................................................8-261

8.14.4.2 RS232_Link_Config ..........................................................................8-263

8.14.4.3 RS232_Link_Status..........................................................................8-267

8.14.4.4 RS232 Data Exchange Example..........................................................8-270

8.14.4.5 RS232_RS.......................................................................................8-273

8.14.4.6 RS232 Free Protocol Example ............................................................8-279

8.14.4.7 RS232_SetDelayTime .......................................................................8-282

String Processing Instructions...............................................................8-284

8.15.1 CONCAT.............................................................................................8-284

8.15.2 DELETE ..............................................................................................8-286

8.15.3 INSERT ..............................................................................................8-288

8.15.4 LEFT / RIGHT......................................................................................8-290

viii

8.15.5 MID...................................................................................................8-292

8.15.6 REPLACE ............................................................................................8-294

8.15.7 LEN ...................................................................................................8-296

8.15.8 FIND..................................................................................................8-297

Immediate Refresh Instructions ............................................................8-299

8.16.1 FROM.................................................................................................8-299

8.16.2 TO.....................................................................................................8-303

8.16.3 ImmediateInput..................................................................................8-307

8.16.4 ImmediateOutput................................................................................8-309

8.16.5 Left_Manage.......................................................................................8-311

PID-related Instructions........................................................................8-315

8.17.1 PID....................................................................................................8-315

8.17.2 GPWM................................................................................................8-326

Address Instruction ...............................................................................8-328

8.18.1 ADR...................................................................................................8-328

Network Diagnosis.................................................................................8-330

8.19.1 Motion Diagnosis.................................................................................8-330

8.19.1.1 CANmotion_SysDiag (Motion System Diagnosis)..................................8-330

8.19.1.2 CANmotion_NodeDiag (Motion Axis Diagnosis).....................................8-332

8.19.2 CANopen Diagnosis..............................................................................8-334

8.19.2.1 CANopen_SysDiag (CANopen System Diagnosis) .................................8-334

8.19.2.2 CANopen_NodeDiag (CANopen Slave Diagnosis) ..................................8-336

8.19.2.3 CANopen_State (CANopen Master Diagnosis) ......................................8-338

Read and Write Offset Bit Value.............................................................8-340

8.20.1 SetBitOffsetValue ................................................................................8-340

8.20.2 GetBitOffsetValue................................................................................8-342

FCS Instructions ....................................................................................8-344

8.21.1 CRC...................................................................................................8-344

8.21.2 LRC ...................................................................................................8-346

Chapter 9 Introductions of Axis Parameters

9.1 Description of Axis Parameters..................................................................9-2

Chapter 10 Motion Control Function

10.1 EN and ENO..............................................................................................10-2

10.2 Relation among Velocity, Acceleration and Jerk.......................................10-3

10.3 Introduction of BufferMode......................................................................10-6

10.4 The State Machine..................................................................................10-32

Chapter 11 Motion Control Instructions

11.1 Table of Motion Control Instructions........................................................11-4

11.2 About Motion Control Instructions ...........................................................11-6

Composition of A Motion Control Instruction............................................. 11-6

Program Languages that Motion Control Instructions Support .................... 11-6

Configuration of Motion Control Instructions ............................................ 11-6

11.3 Single-axis Instructions ...........................................................................11-7

MC_Power ........................................................................................... 11-7

MC_Home...........................................................................................11-16

MC_MoveVelocity ................................................................................11-21

MC_Halt .............................................................................................11-28

MC_Stop ............................................................................................11-33

MC_MoveRelative ................................................................................11-38

MC_MoveAdditive ................................................................................11-46

MC_MoveAbsolute ...............................................................................11-54

MC_MoveSuperimposed........................................................................11-63

MC_HaltSuperimposed .........................................................................11-70

MC_SetPosition ...................................................................................11-75

MC_SetOverride ..................................................................................11-86

MC_Reset...........................................................................................11-90

DMC_SetTorque ..................................................................................11-93

MC_ReadAxisError...............................................................................11-98

MC_ReadActualPosition ......................................................................11-100

MC_ReadStatus.................................................................................11-105

MC_ReadMotionState.........................................................................11-110

DMC_ReadParameter_Motion..............................................................11-115

DMC_WriteParameter_Motion..............................................................11-119

DMC_TouchProbe ..............................................................................11-123

DMC_TouchProbeCyclically .................................................................11-131

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de Delta

Delta

Delta ASD-B2-0121-B Manual de usuario

Delta

Delta AH Series Manual de usuario

Delta

Delta DVP-ES2 Manual de usuario

Delta

Delta DCS Manual de usuario

Delta

Delta DVP-PM Series Instrucciones de uso

Delta

Delta DVP08SM11N Manual de usuario

Delta

Delta DVP-SA2 Manual de usuario

Delta

Delta DZNT-104T Manual de usuario

Delta

Delta DVP-10PM Manual de usuario

Delta

Delta VFD-V Series Manual de usuario

Delta

Delta DVP-EH3 Manual de usuario

Delta

Delta NC200 Manual de usuario

Delta

Delta DVP30EX2 Manual de usuario

Delta

Delta DVP-ES3 Series Manual de usuario

Delta

Delta AH05PM-5A Manual de usuario

Delta

Delta 5CN-220T Series Manual de usuario

Delta

Delta VFD-E Manual de usuario

Delta

Delta VFD-ED Series Manual de usuario

Delta

Delta NC EM Series Manual de usuario

Delta

Delta E Series Instrucciones de montaje

Delta

Delta MP1 Series Manual de usuario

Delta

Delta RTU-ECAT Manual de usuario

Delta

Delta AH500 series Manual del propietario

Delta

Delta AS Series Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario