Delta Security GSM Alarm System Manual de usuario
User Manual
GSM Alarm System
All rights reserved by Delta Security Co., Ltd
www.deltasecurity.cn
Dear Clients,
Thank you for using our GSM Alarm System. We are committed to giving you the
best home security available today and we take the safety of your home and
family seriously. Our system allows you to instantly arm and disarm your property,
instantly change your system settings and find out your system status and much
more. At safety concerns, we encourage you to change the default password as
soon as you get your system set up. This guide will walk you through the easy set
up of your system. We’ve started with already customizing and turning your
system to your specifications, so everything is ready to go when you open the
box.
Please keep this instruction manual in case you may read it at any time in the
future. Thanks again for choosing our products and service.
www.deltasecurity.cn
Cautions
To avoid personal inquiry and the damage to the product, please take the following preventive
measures.
● Input Voltage: DC12V 1A. Do not use power adapter with different specifications.
●Use the professional tools for assembling to avoid the damage to the main panel
● Press the touch keypad lightly
● Keep it away from the moist environment and flammable explosive environment
● Keep the product dry and clean
●An ideal place to mount the panel should be under the minimum RF signal interference and
the center of all defense zones, generally living room.
●Please change your password (default: 888888) as soon as you get this alarm system.
●To obtain a high quality intercom voice, it is highly suggested to keep a 35cm distance to the
Mic.
Features
1: Ultra-thin design, 14mm thickness
2: Menu user interface, easy and comfortable
3: SMS/Bluetooth communication
4: Mute, Volume up/Down
5. RFID function
6: Up to 50 wireless and 2 wired defense zones, each zone can be edited including rename,
delay, siren off, set up as home zone, etc.
7: Door sensor auto-search, manual search
8: Authorized priority phone number in order to fast access to panel without password.
9: Low battery reminding
10: Support CID
11: Chime function
12: USB port to upgrade your software online
13:Built-in engineering model, easy trouble-shooting
www.deltasecurity.cn
1. Alarm Host Diagram
GSM signal indicator: Flash once every second when no SIM card or searching network;
Flashes once every 3 seconds when GSM signal is in normal.
Arm: Arm the system by panel has a 60s’delay (Default factory set).
Home mode: Enter into home mode. All sensors in Normal Zone are armed except those in
Home mode zone which are disarmed so that users can move freely at home
Disarm: could be done by keypad or RFID tags or Remote controllers
Emergency/SOS: Go into emergency status.
Debugging interface: Software calibration, for manufacture use only
Interface for the wired defense zones: port for wired accessories excluding wired siren
Upgrading switch: software online upgrading
www.deltasecurity.cn
2. Start Up
a. Insert a SIM card
Insert a SIM card in direction as above pictures indicate. Push until you hear a click of spring.
Do not insert or take out the SIM card when the main unit panel is powered on.
b. Connect wired accessories with Panel
The panel supports 2 wired accessories excluding wired siren. There is a cable within the
package with one side connecting panel, and another side having 4 wires in different color and
connecting 2 wired accessories. :
Wired Zone 1:
Wired Zone 2:
Blue wire
Signal
Red wire
Signal
Green Wire
Grounding
Yellow wire
Grounding
c. Power on: Connect the power adapter to POWER port on back of the console; Route
the power adapter (12V 1A) cord through the channel toward the side of the console; Plug the
power adapter into nearby electrical wall outlet that is not controlled by a switch; Keep the
Power Switch at ON position for internal backup charging.
www.deltasecurity.cn
3. Operation Instructions
Initiating image:
MUTE
Silent the keyboard
VOL+
Volume up
VOL-
Volume down
MENU
Main menu
Function Key:
BACK
Return to previous menu
UP
Volume up
DOWN
Volume down
ENTER
Main menu
SAVE
Save up the settings
ABC/abc/123
Switch the input method
DELETE
Delete the inputs
www.deltasecurity.cn
Start to Set
Before doing any settings, we need enter into setting status or enter into
“Program”menu. Please follow those steps. Each step within this manual has to
be followed with “Enter”to confirm your operation.
Disarm the system----Press “Menu”----Select “Program”----Input password
(default value: 888888)
Start Menu
【Program】Start to set the system
【Chime】Turn on/off the doorbell Function
【Alarmed Record】: Record alarm events
【Event】: Check out details of opening the door each time
www.deltasecurity.cn
Add a Phone number/SMS number
a. Add a phone number into system
Enter into “program”menu---Select “Phone Numbers”and Enter---Select “Add”and press
Enter---Input numbers on the keyboard and press Save. The system can store 6 phone numbers,
and each phone number is equal to or not longer than 22 digits.
b. Delete a phone number from system
“Program”---“Phone Numbers”---“Delete”---Select the phone number—“YES”---“Delete”
c. Auto Login phone number
This number can access to the system without password. Here are the operation steps.
“Program”---“Phone Numbers”---“Edit”---Select a phone number---“YES”---“Save”
d. Add a SMS number into system
Enter into “program”menu---“SMS Numbers”---“Add”---Select “Phone #”---Input numbers and
press Save. The system can store 3 SMS numbers and each SMS number is equal to or shorter
than 22 digits.
e. Arm/Disarm notification
Default set is “YES”. Every time we arm/disarm the system, it will send a message to preset
SMS phone numbers. Choose “No”will turn off the notification message.
“Program”---“SMS numbers”---“Arm/Disarm notification”---“Yes/No”
www.deltasecurity.cn
Remote Control
In order to protect people on life-threaten occasions, to press SOS button on remote controller
will not trigger alarm, but system will make emergency call and send SMS.
a. Add a remote control into system
This system can register with 8 remote controllers and each of them can be renamed. Besides,
the name of remote control can be recorded. Here are the steps.
Enter into “Program”---Select “Remote Controllers”---“Add”---Trigger the remote controller by
press any key on remote controllers---Input any name you want to identify the remote
controller---Record the name of remote controller. Each step has to be followed with “Enter”
to confirm your operation.
b. Delete a remote control
Enter into “Program”---“Delete”---Select a remote controller---Select “YES”and press “Delete”
c. Rename &Record a remote control
Rename: Enter into “Program”---“Remote controllers”---“Edit”---Select the one remote
control you want to edit---Select “Edit Owner Name”---Input the new name and “Save”.
Record: Recording the name of a remote control is meaningful. Once the SOS key on remote
controller is triggered, the system will dial the preset phone number immediately and the
recording will be played when the emergency call is answered.
Follow the first 4 steps of “Rename”---Select “Record Owner Name”---“Record”and Enter, and
then you will have 5 seconds to recording the name of this remote control.
www.deltasecurity.cn
Wireless Sensors
a. Add a sensor into system, Rename&Record
The system is able to connect with 50 wireless accessories not including remote control, RFID
tags and wireless siren. Here are steps.
Enter into “Program”menu---“Sensors”---“Add”---Trigger sensor, remit a signal to panel---Input
the name of the sensor on the keyboard and “Save”---Recording the sensor name in 5 seconds.
Each step has to be followed by “Enter”to confirm your operation.
b. Wireless sensors Auto-Search
The system can identify the sensor name and location automatically.
Enter into “Program”---“Sensors”---“Edit”---“Auto Search Sensors”---Trigger the sensor and the
system will display the sensor name on screen.
c. Wireless sensors manual search
The sensor name and location can be found manually. Here are the steps.
www.deltasecurity.cn
Tabla de contenidos
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario