Delta Electronics Power Output Module DVPPS01 Manual de usuario

http://www.delta.com.tw/products/plc.asp

DVPPS01

DVPPS02 POWER OUTPUT MODULE

1 Warning

This instruction will be helpful in the installation, electronic specification, function specification and troubleshooting of the DVPPS01 and

DVPPS02.

This is an OPEN TYPE DVPPS series. The DVPPS series should be kept in an enclosure away from airborne dust, high humidity,

electric shock risk and vibration. Also, it is equipped with protective methods such as some special tools or keys to open the enclosure,

so as to avoid the hazard to users and the damage to the DVPPS series.

Never connect the AC main circuit power supply to any of the output terminals, as it will damage the DVPPS series. Check all the wiring

prior to power up. To avoid any electromagnetic noise, make sure the DVPPS series is properly grounded .

2 Introduction

2.1 Model Explanation

Thank you for choosing DELTA DVP series. DVPPS series is a power module with 2 types that sorted by output circuit. 1. PS01 provides

24VDC and 1A current for output power. 2. PS02 provides 24VDC and 2A current for output power. DVPPS series is only used for Delta DVP

series. DVPPS series is separated from the PLC MPU for better space utilization and easier installation.

PS01

Nameplate Explanation

Model

Input Power Supply Spec.

Output Module Spec.

Barcode and Serial Number

MODEL : DVPPS01

INPUT : 100~240VAC 50 / 60Hz

OUTPUT : 24Vdc 1.0A

PS01 0T4360001

PS02

Model

Input Power Supply Spec.

Output Module Spec.

Barcode and Serial Number

MODEL : DVPPS02

INPUT : 100~240VAC 50 / 60Hz

OUTPUT : 24Vdc 2.0A

PS02 0T4370001

Model Name

Series name

Power module

Output current

Serial Number

Production number

Production weeks

Production year (2004)

Production factory

Version

Production model

2.2 Product Profile and Outline

PS01

390

13.3 60

36.5

DVPPS01

Unit: mm

PS02

13.3 60

100

32.5

DVPPS02

Unit: mm

1 Power LED 1 Power LED

2 Output/input terminal (fixed terminal) 2 Output/input terminal (fixed terminal)

3 DIN rail clip 3 DIN rail clip

4 DIN rail track (35mm) 4 DIN rail track (35mm)

5 I/O terminal label 5 I/O terminal label

6 Nameplate 6 Nameplate

7 Mounting holes

3 Function/Electrical Specification

Model

Item DVPPS01 DVPPS02

Power Input 100~240 VAC (-15%~+10%), 50 / 60 Hz 100~240 VAC (-15%~+10%), 50 / 60 Hz

Output Power 24VDC (±3%), output current: 1A max. 24VDC (±3%), output current: 2A max.

Ripple & Noise Under 100mVp-p Typical at full load Under 240mVp-p Typical at full load

Efficiency 78%~87% Typical at full load

Over Load / Short Circuit Protection Auto Recovery

Grounding The diameter of grounding wire cannot be smaller than the wire diameter of terminals L and N

(All PLC units should be grounded directly to the ground pole).

Operation/Storage Environment Operation: 0℃~55℃(Temperature), 50~95% (Humidity), Pollution degree 2;

Storage: -25℃~70℃(Temperature), 5~95% (Humidity)

Agency Approvals Underwriters Laboratories, Inc.: UL508 Listed (Industrial Control Equipment)

European Community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC

Weight (g) 158 250

4 Installation and Wiring

4.1 Mounting Arrangements and Wiring

■DIN Rail Installation

The DVPPS can be secured to a cabinet by using the DIN rail that is 35mm

high with a depth of 7.5mm. When mounting the DVPPS on the DIN rail, be

sure to use the end bracket to stop any side-to-side motion of the DVPPS,

thus to reduce the chance of the wires being pulled loose. On the bottom of

the DVPPS is a small retaining clip. To secure the DVPPS to the DIN rail,

place it onto the rail and gently push up on the clip. To remove it, pull down

on the retaining clip and gently pull the DVPPS away from the DIN rail.

Please see the figure on the right:

For heat dissipation. Make sure to

provide a minimum clearance of

50mm between the unit and all

sides of the cabinet. (as shown

below)

DVP MPU

> 50mm> 50 mm

> 50mm

■Direct mounting: Tighten M4 screws into direct mount hole.

■Wiring

To suit M3.5 screw terminals

Below 6.2

Notes:

1. Please use O-type or Y-type terminals for I/O wiring terminals. The specification for the terminals is

as shown on the left. Tighten PLC terminal screws to a torque of 5~8 kg-cm (4.3~6.9 in-lbs).

2. Please avoid tiny metal material enter DVPPS01/PS02 when screwing and wiring. After finishing

wire, remove the affix that pasted on the heat sink for heat dissipation.

3. Use Copper Conductors Only, 60℃.

4.2 Wiring Notes

■Environment

1. DO NOT store the DVPPS01/PS02 in a dusty, smoky, or corrosive atmosphere.

2. DO NOT store the DVPPS01/PS02 in an environment with high temperature or high humidity.

3. DO NOT install PLC on a shelf or on an unstable surface.

■Power Input Wiring

Power input of DVPPS01/PS02 is AC input; following items should be noticed:

1. Connect the AC input (100VAC ~ 240VAC) to terminals L and N. Any AC110V or AC220V connected to the +24V terminal will

permanently damage the DVPPS01/PS02.

2. Please use wires of 1.6mm and above for the grounding.

3. If the power-cut time is less than 10ms, the DVPPS01/PS02 still operates unaffectedly. If the power-cut time is too long, the

DVPPS01/PS02 will stop operating and all the outputs will be Off.

5 Trial Run

☼Power indicator, Running and Test

The “POWER” LED at the front of DVPPS01/PS02 will be lit (in green) if the power is on. If the indicator is not ON, it indicates that the

power supply is not enough or short circuit. Please check your power wiring.

6 Troubleshooting

Judge the errors by the indicators on the front panel. When errors occurred on DVPPS01/PS02, please check:

☼「POWER」LED

The “POWER” LED at the front of the MPU will be lit (in green) if the power is on. If the indicator is not on when the MPU is powered up,

please check if power supply is normal. If the indicator is not on when the MPU is powered up and with the input power being normal, it is

an indication that the PLC is malfunction. Please have this machine replaced or have it repaired at a dealer near you.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Delta Electronics

Delta Electronics

Delta Electronics SMT Power Inductor MPC13X Instrucciones de instalación

Delta Electronics

Delta Electronics SMT Power Inductor STQ127 Instrucciones de instalación

Delta Electronics

Delta Electronics PFC Chokes PFC2815V Series Manual de usuario

Delta Electronics

Delta Electronics Pulse Generator Card EME-PG01 Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor SIWC1360 Instrucciones de instalación

Delta Electronics

Delta Electronics IPM- C Series Manual de usuario

Delta Electronics

Delta Electronics Igniter IGT006 Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor MPL13X Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor MPC Instrucciones de instalación

Delta Electronics

Delta Electronics SMT Power Inductor 1362 Instrucciones de instalación

Delta Electronics

Delta Electronics Through Hole Power Inductors THAR0806 Instrucciones de instalación

Delta Electronics

Delta Electronics PFC Chokes PFC4818V Series Manual de usuario

Delta Electronics

Delta Electronics PFC Chokes PFC2811V Series Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor SIWC1355 Manual de usuario

Delta Electronics

Delta Electronics PCI-M324 Manual de usuario

Delta Electronics

Delta Electronics TDHCB Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor SIWC1365 Instrucciones de instalación

Delta Electronics

Delta Electronics PFC Chokes PFC3515V Series Manual de usuario

Delta Electronics

Delta Electronics Communication Module RTU-485 Manual de usuario

Delta Electronics

Delta Electronics Terminal Panels Series TP04G-AS2 Manual de usuario

Delta Electronics

Delta Electronics SMT Power Inductor SI54 Manual de usuario

Delta Electronics

Delta Electronics Network Device TDV Manual de usuario

Delta Electronics

Delta Electronics Series Temperature Controller DTD Series Manual de usuario

Delta Electronics

Delta Electronics DVPAETB-ID32A/OR16A Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario