Dell U8510 - Wireless Printer Adapter 3300 Print... Manual de operación y mantenimiento

Dell™ Wireless Printer Adapter 3300 User's
Guide
Click the links to the left for information on the features and operation of your wireless printer adapter. For
information on other documentation included with your wireless printer adapter, see Finding Information.
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your wireless
printer adapter.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how
to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Model 3300
October 2004

Finding Information
What are you looking for?
Find it here
Software for my wireless
printer adapter
My User's Guide
Setup CD
Safety information
Warranty information
Regulatory information
Product Information Guide
How to set up my wireless
printer adapter
Set Up Your Dell™ Wireless Printer Adapter 3300 poster
Latest software for my
wireless printer adapter
Answers to technical service
and support questions
Documentation for my
wireless printer adapter
Dell Support Website: support.dell.com
The Dell Support website provides several online tools, including:
Solutions - Troubleshooting hints and tips, articles from
technicians, and online courses
Customer Care - Contact information, order status, warranty,
and repair information
Reference - Wireless printer adapter documentation and
product specifications
How to use Windows XP
Documentation for my
wireless printer adapter
Windows XP Help and Support Center
Click Start Help and Support.1. Type a word or phrase that describes your problem, and then2.
3.
4.

1.
click the arrow icon.
2.
Click the topic that describes your problem.3. Follow the instructions shown on the screen.4.

About Your Wireless Printer Adapter
Unpacking your wireless printer adapter
Understanding the wireless printer adapter ports
Understanding the wireless printer adapter indicator lights
Wireless networking overview
Unpacking your wireless printer adapter
Number
Description
1
Dell Wireless Printer Adapter 3300
2
Product Information Guide
3
Dell Wireless Printer Adapter 3300 Setup CD
4
Set Up Your Dell™ Wireless Printer Adapter 3300 poster
5
Power supply
6
Power cord wall adapter
7
USB cable
NOTE: This wireless printer adapter will not work with all Dell printers. Consult support.dell.com for
more information.
Understanding the wireless printer adapter ports

Number
Part
Description
1
USB port (to
computer)
Connects your wireless printer adapter to a computer for initial configuration
and network setup. Use USB port 2 to connect your wireless printer adapter to
your printer.
2
USB port (to
printer)
Connects your wireless printer adapter to your printer.
3
Test button
Press and hold while inserting the power cord connector into the power
connector to reset your wireless printer adapter to factory default settings. If
the wireless printer adapter is connected to a laser printer, press once to print a
test page.
4
Power supply
connector
Connects the wireless printer adapter to the power supply.
Understanding the wireless printer adapter indicator
lights
Number
Part
Description
1
Power
Indicator
The wireless printer adapter has power.
2
USB Status
The wireless printer adapter is connected by USB and is communicating.
3
Wireless Status
The wireless printer adapter is connected to and communicating with the
network.
For more information, see Indicator light status.
Wireless networking overview

There are two types of wireless network connections: Infrastructure and Ad-Hoc.
In Infrastructure mode, the network structure is based on a series of wireless routers or base-stations.
In Ad-Hoc mode, wireless devices communicate with each other directly without using a wireless router.
If you can connect the wireless printer adapter to your computer with the USB cable, you can set up the
wireless printer adapter using the Dell Wireless Printer Adapter 3300 Setup Wizard on the Setup CD. For
more information, see Basic Setup.
If you are unable to connect the wireless printer adapter to your computer with the USB cable, you can
configure your wireless printer adapter by using Ad-Hoc networking and the embedded web page. For more
information, see Advanced Setup.
NOTE: To configure the wireless printer adapter by this method, you must have a computer with a
wireless network card.

Basic Setup
Minimum requirements
Selecting a location for your wireless printer adapter
Setup overview
Determining your wireless network settings
Setting up your wireless printer adapter
Installing your printer on the network
Minimum requirements
The Dell Wireless Printer Adapter 3300
An existing wireless network. The following security types are supported:
No security
WEP with 64 bit or 128 bit security keys
WPA (WiFi protected access) - personal in pre-shared key mode over TKIP (Infrastructure mode
networks only)
A computer that is connected to your wireless network
A network-capable printer
The Dell Wireless Printer Adapter 3300 Setup CD
The software CD that came with your printer
NOTE: To use the Dell Wireless Printer Adapter 3300 Setup Wizard on the Setup CD, your computer
must be running Windows 2000 or Windows XP.
Selecting a location for your wireless printer adapter
The location of your wireless printer adapter is vital to ensuring that it works effectively. Follow these
guidelines when determining a location for your wireless printer adapter:
Place the wireless printer adapter on a flat, level surface away from excessive heat, cold, and moisture.
Keep the wireless printer adapter within appropriate range of a wireless access point if your network
uses an Infrastructure configuration.
Keep the wireless printer adapter away from other non-essential electronic devices such as microwave
ovens or other appliances.

Keep the wireless printer adapter away from obstructions that could interfere with the wireless signal.
Setup overview
The basic setup process consists of three sections:
Determining your wireless network settings1.
Setting up your wireless printer adapter to communicate on your wireless network2.
Installing your printer on the network3.
The setup section involves connecting the wireless printer adapter to a computer by USB cable and running
the Dell Wireless Printer Adapter 3300 Setup Wizard on the Setup CD to configure the device and test the
wireless connection.
The installation section involves connecting the wireless printer adapter to the printer that you want to install
and running the printer software CD to install it as a network printer.
Additional computers can use the printer attached to the printer adapter by running the printer software CD
on each of these computers.
Before setting up your wireless printer adapter, do the following:
Install toner or ink cartridges in your printer.
Load paper into your printer.
Turn on your printer.
NOTE: DO NOT install the printer software yet, and DO NOT connect the printer to the computer or
the wireless printer adapter.
Determining your wireless network settings
You may need to know some of your wireless network settings in order to set up your wireless printer
adapter. If you're not sure what these settings are, refer to your network documentation or check with your
network administrator.
Network Name, also known as SSID (Service Set ID)
Security type

None
WEP (Wired Equivalency Protocol)
WPA (Wifi Protected Access)
Security Key(s)
Setting up your wireless printer adapter
Connecting your wireless printer adapter to your computer
Connect the large end of the USB cable to your computer USB port.1.
Insert the small end of the USB cable into the left side USB port of the wireless printer adapter.2.
Connect the wireless printer adapter to its power supply.3.
Continue with Configuring your wireless printer adapter.4.
Configuring your wireless printer adapter
Insert the Dell Wireless Printer Adapter 3300 Setup CD. The Setup Wizard on the Setup CD will
automatically launch.
1.
Click Agree on the License Agreement screen.2.
Select the destination folder for the Dell software, and then click Finish.3.
After the software has installed, click Next on the Welcome screen.4.
Select the appropriate Network Name (SSID) from the list, and then click Next.5.

5.
If the Network Name you want to use is not in the list, select I want to enter a different
configuration, and then click Next.
If the correct Network Name is still not in the list, make sure that your wireless network is
functioning, and try again.
If your wireless network is broadcasting and the correct Network Name still does not appear:
From the Wireless Networks Found in Your Area screen, select I want to enter a different
network name, and then click Next.
a.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de Dell

Dell
Dell TrueMobile 2300 Guía de instalación

Dell
Dell MU833 Instrucciones de funcionamiento

Dell
Dell 2350 - Wireless WLAN Broadband Router Manual de usuario

Dell
Dell TrueMobile 2300 Manual de usuario

Dell
Dell WX-5565D Manual de usuario

Dell
Dell 2350 - Wireless WLAN Broadband Router Manual de usuario

Dell
Dell TrueMobile 2350 Manual de usuario

















