Dell PowerApp .cache 100 Manual técnico

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Servidor de Dell

Dell

Dell PowerEdge 2970 Manual de usuario

Dell

Dell PowerEdge T20 Manual de usuario

Dell

Dell ECS EX Series Instrucciones de instalación

Dell

Dell PowerEdge T710 Manual de usuario

Dell

Dell Force10 MXL Blade Manual de usuario

Dell

Dell PowerEdge C6220 II Manual de usuario

Dell

Dell PowerEdge 1400SC Manual de usuario

Dell

Dell PowerEdge M820 Systems Guía de inicio rápido

Dell

Dell Wyse 5030 Manual de usuario

Dell

Dell EMC PowerEdge T340 Manual

Dell

Dell Wyse 7030 Manual de usuario

Dell

Dell PowerEdge FX2 Manual de usuario

Dell

Dell PowerEdge R510 Guía de inicio rápido

Dell

Dell PowerEdge R630 Manual de usuario

Dell

Dell PowerEdge M1000e Manual de usuario

Dell

Dell PowerApp 110 Manual de usuario

Dell

Dell PowerEdge 6600 Guía

Dell

Dell 1955 Manual de usuario

Dell

Dell VMware ESX Server 3i Manual de usuario

Dell

Dell PowerEdge R810 Manual de usuario

Dell

Dell EMC VxFlex Ready Node 13G Manual

Dell

Dell 8 Manual de usuario

Dell

Dell PowerEdge R510 Manual de usuario

Dell

Dell PowerEdge 6400 Manual de usuario

Manuales populares de Servidor de otras marcas

HP

HP AlphaServer ES47 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario

Lenovo

Lenovo ThinkSystem SR635 V3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX900 Manual de usuario

Asus

Asus RS700DA-E6 PS4 Manual de usuario

















This document updates information contained in your Dell PowerApp™ system and service

documentation.

If you replace the PowerApp appliance’s system board, you must also restore the system configura-

tion settings using the SMBIOS program on the diskette or CD provided with the new system board.

In addition, this document provides important information for reinstalling the microprocessor and

heat sink on the new system board.

For details on replacing the system board, see “Replacing the System Board” in your Service

Manual.



To restore the system configuration settings, perform the following steps:

1. Insert the configuration diskette or CD provided with the new system board, and turn on the

computer.

The computer boots from the diskette or CD and prompts you to select the type of system you

are servicing.

2. When prompted, enter the system type and enter the service tag number, which is located on

the back of the computer.

The program notifies you when programming is complete.

3. Remove the diskette or CD and reboot the computer.

4. When the system reboots, press <F2> to enter the system setup program.

5. From the Main Menu, enter the correct time and date in the System Time and System Date

options.

6. Set the Processor Serial Number option to “Disabled.”

7. Press <F10> to save these settings, exit the system setup program, and reboot the system.



To install the microprocessor and heat sink on the new system board, perform the following steps:

1. Using the cleaning cloth supplied with the new system board, wipe the top of the microproces-

sor die to remove any previous thermal grease.

Once cleaned, the microprocessor die should have a reflective shine.

2. Insert the microprocessor into the ZIF socket on the new system board and lower the lever to

lock it into place.

3. Peel off the protective backing (if present) from the enclosed replacement heat sink to expose

the pad of thermal grease.

4. Place the heat sink on the microprocessor and ensure that the bevel on the heat sink covers the

raised portion of the ZIF socket.

5. Replace the heat sink clip onto the heat sink and secure it on the ZIF socket.

The longest side of the clip should be pointing to the front of the appliance.

____________________

Information in this document is subject to change without notice.

© 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.

Trademarks used in this text: Dell, the DELL logo, and PowerApp are trademarks of Dell Computer Corporation. Other trademarks and

trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer

Corporation disclaims any proprietary interest in trademarks and trade names other than its own.