EN
⚠WARNING: Please carefully read the safety instructions and the user manual before using
this product, otherwise it may result in hazardous laser radiation and electric shock. The
person responsible for the equipment must ensure that all users understand these directions
and adhere to them.
Safety Instructions for Laser Products
Laser radiation. DO NOT STARE INTO BEAM! Class 2 laser product.
a) Viewing the laser output with certain optical instruments (for example, eye loupes,
magnifiers and microscopes) with a distance of 100mm may pose an eye hazard.
b) Viewing the laser output with certain optical instruments designed for use at a distance (for
example, telescopes and binoculars) may pose an eye hazard.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
a) NEVER direct the beam towards a person's eyes!
b) Avoid positioning the laser such that it may lead to unintentional eye exposure to any
potential passing pedestrians/traffic.
c) DO NOT direct the beam towards animals.
d) DO NOT use in the vicinity of children.
e) DO NOT direct the beam onto reflective surfaces.
f) Always switch off when not in use and do not leave unattended.
g) Remove the batteries before storing the circular saw away.
This laser product has no serviceable parts. Do not attempt to disassemble or repair.
Battery installation
1) According to figures, remove battery compartment lid.
2) Insert batteries with correct polarity according to battery lid indications.
3) Close the battery compartment lid.
CAUTION:
1) Please do not mix new and old batteries, use alkaline batteries or rechargeable batteries
only.
2) Please replace batteries when the symbol flashes permanently in the display.
3) Please remove the batteries before any long period of non-use.
4) Out of power batteries must not be disposed of with household, care for the environment
and take them to the collection points provided in accordance with national or local
regulations.
