Degelman STRAWMASTER 7000 Manual de usuario

STRAWMASTER 7000

30’, 50’, 62’, 70’ & 82’

Serial Numbers up to 7139

OPERATOR MANUAL

& PARTS CATALOG

142628 v1.6

DEGELMAN INDUSTRIES LTD.

BOX 830-272 INDUSTRIAL DRIVE,

REGINA, SK, CANADA, S4P 3B1

FAX 306.543.2140 PH 306.543.4447

1.800.667.3545 DEGELMAN.COM

DEGELMAN INDUSTRIES LTD.

BOX 830-272 INDUSTRIAL DRIVE,

REGINA, SK, CANADA, S4P 3B1

FAX 306.543.2140 PH 306.543.4447

1.800.667.3545 DEGELMAN.COM

IMPORTANT:

READ MANUAL

TABLE OF CONTENTS - OPERATORS SECTION

Introduction 1

Safety

Safety Information 2

Operation

Overview / Preparation 6

Hook-Up 8

Convert to Field Position 9

Suggested Tine Angle Settings 10

Height Adjustment 11

Transporting / Storage 12

Service & Maintenance

Service 13

Repair 15

Troubleshooting 19

TABLE OF CONTENTS - PARTS SECTION 21

Warranty 44

-1-

142628 - Strawmaster 7000 (27-September-2013)

OPERATOR ORIENTATION - The directions left, right, front and rear, as mentioned throughout the manual,

are as seen from the tractor drivers’ seat and facing in the direction of travel.

Introduction

Left Side

Rear

Front

Right

Side

CONGRATULATIONS on your choice of a Degelman Strawmaster®to complement your farming operation.

It has been designed and manufactured to shatter straw, control weeds, rake ﬂax straw, and incorporate

seed and chemicals. Use this manual as your ﬁrst source of information about this machine.

Safe, efﬁcient and trouble free operation of your Degelman Strawmaster®requires that you and anyone

else who will be operating or maintaining it, read and understand the Safety, Operation, Maintenance and

Troubleshooting information contained within this manual.

Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your

Degelman Dealer if you need assistance, information, or additional copies of the manual.

-2-

142628 - Strawmaster 7000 (27-September-2013)

The Safety Alert Symbol identiﬁes important safety

messages applied to the Strawmaster®and in this

manual. When you see this symbol, be alert to the

possibility of injury or death. Follow the

instructions provided on the safety messages.

The Safety Alert Symbol means:

ATTENTION!

BECOME ALERT!

YOUR SAFETY IS INVOLVED!

DANGER: Indicates an imminently hazardous situation

that, if not avoided, WILL result in death or serious injury

if proper precautions are not taken.

WARNING: Indicates a potentially hazardous

situation that, if not avoided, COULD result in death or

serious injury if proper precautions are not taken.

CAUTION: Indicates a potentially hazardous situation

that, if not avoided, MAY result in minor or moderate

injury if proper practices are not taken, or, serves as a

reminder to follow appropriate safety practices.

Why is SAFETY important to YOU?

3 BIG Reasons:

 •AccidentsCanDisableandKill

 •AccidentsAreCostly

 •AccidentsCanBeAvoided

Note the use of the Signal Words: DANGER, WARNING, and CAUTION with the safety messages.

The appropriate Signal Word has been selected using the following guidelines:

SAFETY ALERT SYMBOL

SIGNAL WORDS

Safety

CAUTION

DANGER

WARNING

-3-

142628 - Strawmaster 7000 (27-September-2013)

1. Read and understand the Operator’s

Manual and all safety signs before

operating, maintaining or adjusting

the Strawmaster®.

2. Install and properly secure all shields and

guards before operating. Use hitch pin with a

mechanical locking device.

3. Have a ﬁrst-aid kit available for use

should the need arise and know

how to use it.

4. Have a ﬁre extinguisher available

for use should the need arise and

know how to use it.

5. Wear appropriate protective gear. This list

includes but is not limited to:

• A hard hat

• Protective shoes with slip resistant soles

• Protective glasses or goggles

• Heavy gloves

• Wet weather gear

• Hearing protection

• Respirator or lter mask

6. Clear the area of people, especially small

children, and remove foreign objects from the

machine before starting and operating.

7. Do not allow riders.

8. Stop tractor engine, set park brake, remove

ignition key and wait for all moving parts to

stop before servicing, adjusting, repairing or

unplugging.

9. Review safety related items with all operators

annually.

YOU are responsible for the safe operation and

maintenance of your Degelman Strawmaster®.

YOU must ensure that you and anyone else who

is going to operate, maintain or work around

the Strawmaster®be familiar with the operating

and maintenance procedures and related SAFETY

information contained in this manual.

This manual will take you step-by-step through

your working day and alerts you to all good safety

practices that should be adhered to while operating

this equipment.

Remember, YOU are the key to safety. Good safety

practices not only protect you but also the people

around you. Make these practices a working

part of your safety program. Be certain that

EVERYONE operating this equipment is familiar

with the recommended operating and maintenance

procedures and follows all the safety precautions.

Most accidents can be prevented. Do not risk injury

or death by ignoring good safety practices.

• Strawmaster®owners must give operating

instructions to operators or employees before

allowing them to operate the Strawmaster®,

and at least annually thereafter per OSHA

regulation 1928.51.

• The most important safety device on this

equipment is a SAFE operator. It is the opera-

tor’s responsibility to read and understand

ALL Safety and Operating instructions in the

manual and to follow these. All accidents can

be avoided.

• A person who has not read and under-

stood all operating and safety instructions

is not qualiﬁed to operate the machine. An

untrained operator exposes himself and by-

standers to possible serious injury or death.

• Do not modify the equipment in any way.

Unauthorized modiﬁcation may impair the

function and/or safety and could affect the

life of the equipment.

• Think SAFETY! Work SAFELY!

Safety

SAFETY GENERAL SAFETY

-4-

142628 - Strawmaster 7000 (27-September-2013)

1. Review the Operator’s Manual and all safety

items before working with, maintaining or

operating the Strawmaster®.

2. Stop the tractor engine, set park brake, remove

ignition key and wait for all moving parts to

stop before servicing, adjusting, repairing or

unplugging.

3. Keep hands, feet, clothing and hair away from

all moving and/or rotating parts.

4. Clear the area of bystanders, especially

children, when carrying out any maintenance

and repairs or making any adjustments.

5. Place safety stands or large blocks under the

frame before removing tires or working beneath

the machine.

6. Be careful when working around or maintaining

a high-pressure hydraulic system. Wear proper

eye and hand protection when searching for

a high pressure hydraulic leak. Use a piece

of wood or cardboard as a backstop when

searching for a pin hole leak in a hose or a

ﬁtting.

7. Always relieve pressure before disconnecting or

working on hydraulic system.

1. Read and understand the Operator’s Manual

and all safety signs before using.

2. Stop tractor engine, set park brake, remove

ignition key and wait for all moving parts to

stop before servicing, adjusting, repairing or

unplugging.

3. Keep hands, feet, hair and clothing away from

all moving and/or rotating parts.

4. Do not allow riders on the Strawmaster®or

tractor during operation or transporting.

5. Keep all shields and guards in place when

operating.

6. Clear the area of all bystanders, especially

children, before starting.

7. Do not operate machine on steep side hills or

slopes.

8. Be careful when working around or

maintaining a high-pressure hydraulic system.

Ensure all components are tight and in good

repair before starting.

9. Clean all reﬂectors, lights and the SMV sign

before transporting on a highway or public

road. Be sure to check with local highway

authorities and comply with their lighting

requirements.

Safety

OPERATING SAFETY MAINTENANCE SAFETY

-5-

142628 - Strawmaster 7000 (27-September-2013)

1. Always place all tractor hydraulic controls in

neutral before dismounting.

2. Make sure that all components in the hydraulic

system are kept in good condition and are

clean.

3. Replace any worn, cut, abraded, ﬂattened or

crimped hoses and metal lines.

4. Do not attempt any makeshift repairs to the

hydraulic lines, ﬁttings or hoses by using tape,

clamps or cements. The hydraulic system

operates under extremely high-pressure.

Such repairs will fail suddenly and create a

hazardous and unsafe condition.

5. Wear proper hand and eye

protection when searching

for a high-pressure hydraulic

leak. Use a piece of wood

or cardboard as a backstop

instead of hands to isolate

and identify a leak.

6. If injured by a concentrated high-pressure

stream of hydraulic ﬂuid, seek medical attention

immediately. Serious infection or toxic reaction

can develop from hydraulic ﬂuid piercing the

skin surface.

7. Before applying pressure to the system, make

sure all components are tight and that lines,

hoses and couplings are not damaged.

• Think SAFETY! Work SAFELY

1. Read and understand ALL the information in the

Operator’s Manual regarding procedures and

SAFETY when operating the Strawmaster®in

the ﬁeld/yard or on the road.

2. Check with local authorities regarding machine

transport on public roads. Obey all applicable

laws and regulations.

3. Always travel at a safe speed. Use caution

when making corners or meeting trafﬁc.

4. Make sure the SMV (Slow Moving Vehicle)

emblem and all the lights and reﬂectors that are

required by the local highway and transport

authorities are in place, are clean and can be

seen clearly by all overtaking and oncoming

trafﬁc.

5. Keep to the right and yield the right-of-way to

allow faster trafﬁc to pass. Drive on the road

shoulder, if permitted by law.

6. Always use hazard warning ﬂashers on tractor

when transporting unless prohibited by law.

7. Always use a pin with provisions for a

mechanical retainer and a safety chain when

attaching to a tractor or towing vehicle.

1. Failure to follow proper procedures when

mounting a tire on a wheel or rim can produce

a blow out which may result in serious injury or

death.

2. Do not attempt to mount a tire unless you have

the proper equipment and experience to do the

job.

3. Have a qualiﬁed tire dealer or repair

serviceman perform required tire maintenance.

Safety

HYDRAULIC SAFETY TRANSPORT SAFETY

TIRE SAFETY

-6-

142628 - Strawmaster 7000 (27-September-2013)

70’ Strawmaster Model

1. Trailer Frame

2. Latch Assembly

3. Swing Arm

4. Wing Beam

5. Centre Beam

6. Truss Beam

7. 10’ Harrow Section

Operation

The Degelman Strawmaster®is designed for

effective straw management, weed control,

herbicide application, raking ﬂax residue and

following ground contour. The Strawmaster®

is fully adjustable from tine angle to operating

height with the use of gear driven jacks or

optional hydraulics. The harrow sections can

operate in a ﬂoat position or under a variable

amount of pressure with the use of hydraulics and

spring bars.

It is the responsibility of the owner or operator

to read this manual carefully to learn how to

operate the machine safely, and how to set it to

provide maximum efﬁciency. Safety is everyone’s

business. By following safe operating practices, a

safe environment is provided for the operator and

bystanders.

The manual will take you step-by-step through

your working day. By following the operating

instructions in conjunction with a good

maintenance program your machine will provide

many years of trouble-free service.

TO THE NEW OPERATOR OR OWNER

The Strawmaster®harrow sections consist of ﬁve

rows with ten tines per row which hold the straw.

As the tines drag along the ground, they

oscillate to build up a high

frequency vibration and

provide a shattering

action which breaks

up the straw allowing

the residue to be spread

evenly as it is released.

When stood vertically

the tines will rake ﬂax

residue.

PRINCIPLES OF OPERATION

BRIEF OVERVIEW OF OPERATION

• Operating speed will depend on tractor

horsepower, environmental conditions and each

particular operation. A speed of 8 to 12 MPH.

(12 to 16 KPH) is suggested to efﬁciently shatter

and spread straw and residue.

• Operating height for the harrow will vary with

the length of the tines, and the angle that the

tines are set at. As the tines wear down, the

height of the machine from the ground will have

to be adjusted down proportionally. (Refer to

the Height Adjustments section)

• The harrow sections can be set in ﬂoat position,

where the section drags the ground under its

own weight.

• Pressure can be applied using the hydraulics

to rotate the beam further back. The spring

bars will deﬂect to apply pressure to the

harrow section and the ground. The amount of

pressure to apply will depend

on the application,

and the operator’s

preference.

• Some suggested settings can be found in the

“Suggested Tine Angle Settings” section. As

there are only a few standard guidelines, feel

free to experiment with ground clearance, tine

angle and section pressure to obtain desired

results for each operation.

Otros manuales para STRAWMASTER 7000

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Degelman

Degelman

Degelman Landroller LRX Series Manual de usuario

Degelman

Degelman Tri-Plex Landroller 7634 Manual de programación

Degelman

Degelman PRO-TILL Series Manual de usuario

Degelman

Degelman STRAWMASTER X 70 Manual de programación

Degelman

Degelman ROCK DIGGER RD320 Manual de programación

Degelman

Degelman PRO-TILL 14 NT Manual de usuario

Degelman

Degelman 5900 Series Manual de usuario

Degelman

Degelman PRO-TILL 41 Manual de usuario

Degelman

Degelman Pro-Till 33 Manual de programación

Degelman

Degelman STRAWMASTER 7000 Manual de usuario

Degelman

Degelman LANDROLLER 45 Manual de usuario

Degelman

Degelman STRAWMASTER X Manual de usuario

Degelman

Degelman Tri-Plex Landroller 7645 Manual de usuario

Degelman

Degelman PRO-CAST 80 Manual de programación

Degelman

Degelman Pro-till 20 Manual de programación

Degelman

Degelman M28 Manual de programación

Degelman

Degelman Signature Series Manual de programación

Degelman

Degelman PRO-TILL 30 Manual de usuario

Degelman

Degelman STRAWMASTER 50 Manual de programación

Degelman

Degelman REV1500 Manual de programación

Degelman

Degelman PRO-CAST 80 Manual de usuario

Degelman

Degelman PRO-TILL 14 Manual de usuario

Degelman

Degelman STRAWMASTER 700 Series Manual de usuario

Degelman

Degelman PRO-TILL SCORPION HITCH Manual de programación

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario