Datecs Zebra PD20 Manual de usuario
1 DATECS
Zebra PD20/PD20-1
User Manual
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 2
THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL
OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD.
Address: 4 Datecs Street, Sofia 1592, Bulgaria
Phone: +359 2 816 55 50
Fax: +359 2 816 55 65
E-mail: [email protected]
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 3
REVISION HISTORY
Version
Data
Change description
1.0.0
08.01.2021
First Release
1.1.0
31.03.2021
Added PD20
1.2.0
16.04.2021
Updated “TECHNICAL SPECIFICATIONS”
1.3.0
28.04.2021
Updated section “Status LEDs”
1.4.0
03.06.2021
Updated section “Smart cards reading”
Added section “REGULATORY”
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 4
CONTENTS
REGULATORY........................................................................................................................................................................... 5
TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6
GENERAL VIEW........................................................................................................................................................................ 7
GETTING STARTED................................................................................................................................................................... 9
PERIODIC INSPECTION AND MAINTENANCE ........................................................................................................................ 10
OPERATION MODES .............................................................................................................................................................. 11
APPLICATION DOWNLOAD MODE,SYSTEM MODE AND CLEARING BLUETOOTH PARING INFO.................................................................. 11
STATUS LEDS........................................................................................................................................................................ 11
BLUETOOTH PAIRING.............................................................................................................................................................. 13
MAGNETIC CARDS READING ..................................................................................................................................................... 15
CONTACTLESS CARDS READING.................................................................................................................................................. 16
SMART CARDS READING........................................................................................................................................................... 17
CARE, MAINTENANCE AND WARRANTY............................................................................................................................... 18
SERVICE AND SUPPORT......................................................................................................................................................... 18
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 5
REGULATORY
FCC ID: YRW-PD20
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 6
TECHNICAL SPECIFICATIONS
Processor
ARM Cortex® M3 Security Microcontroller
Memory
64KB Internal ROM
256KB Internal RAM
1MB Internal Flash
Application Memory
4MB Serial Flash
Keypad
•ON / OFF key and Bluetooth pairing conformation/cancel
Magnetic Card Reader
• 3-track bi-directional reading
• ISO 7810, 7811 and 7813
Smart Card Reader
ISO7816, EMV L1 certified
Contactless Card Reader
for payment applications
(option)
• AMEX ExpressPay
• Discover D-PAS
• MasterCard Contactless
• VISA PayWave
• China Union Pay
• JCB
Contactless Card Reader
(option)
•NFC-A/ISO 14443 Type-A
•NFC-B/ISO 14443 Type-B
•NFC-F/Felica
•NFC-V/ISO 15693
Battery
Rechargeable lithium-Polymer battery 3.7V, 400 mAh
Connectivity
• USB
- Device
• Bluetooth Low Energy 4.2
Audio indication
Electro-Magnetic Buzzer
OS compatibility
iOS, Android, Windows
Reliability
•500 000 chip card cycles
• 1 000 000 magnetic card swipes
Certifications
PCI 6, CE, FCC
Dimensions (W x D x H), mm
75.80 (78.80) х 55.10 (58.10) х 15 (top housing max. outer dimensions)
Weight, g
74
Environmental
Operating (while internal battery is discharging): -10oC to +40oC / 5 to 95% RH
Operating (while internal battery is charging): 0oC to +45oC / 5 to 95% RH
Storage: -20oC to +55oC / 5 to 90% RH
Power Supply
DC 5 V, 500mA through USB connector or POGO pins
* Specification can be change without any notice.
Use only original equipped cable USB-A to USB-C.
Use only approved USB adapters. The minimum requirements of USB adapter
are 5V/500mA.
Waste Electrical & Electronic Equipment
The symbol means that according to local laws and regulations your product
shall be disposed of separately from household waste at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources.
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 7
GENERAL VIEW
Figure 1
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 8
1. LEDs indication for Contactless transaction / LEDs indication for device status
2. Mounting insert 1
3. Rear Pads (USB and charging)
4. Contactless reader
5. On/Off button (Bluetooth pairing and cancel button)
6. USB port
7. Mounting insert 2
8. Opening for magnetic card
9. Opening for inserting smart card
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 9
GETTING STARTED
PD20/PD20-1 has rechargeable Li-Po battery. Can be charge from USB port or Rear pads.
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
1 hour and 30min.
Charging form USB adapter:
Figure 2
Main battery replacement:
To replace the main battery of PD20/PD20-1 please contact with your local
Datecs representative or service provider.
1 DATECS ZEBRA PD20/PD20-1 USER MANUAL
UM 07.01.31/v1.4.0 10
PERIODIC INSPECTION AND MAINTENANCE
The following inspections must be performed on a regular basis after initial receipt and installation of
PD20/PD20-1:
• There are no visual indications for trying unauthorized opening of the device
• There are no unusual wires connected to the ICC acceptor or any of the ports on the terminal.
• There is no shim device in the ICC acceptor slot.
• The terminal serial number (on the label) corresponds to the one in the inventory paperwork.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Terminal táctil de Datecs
