DT1364
2 20171206-V0
Contents
1. About this document.....................................................4
1.1. Function ................................................................................... 4
1.2. Target group............................................................................. 4
1.3. Symbolism used....................................................................... 4
2. For your safety...............................................................5
2.1. Authorized personnel ............................................................... 5
2.2. Appropriate use........................................................................ 5
2.3. Warning about misuse ............................................................. 5
2.4. General safety instructions....................................................... 5
2.5. EU conformity........................................................................... 5
2.6. Safety information for Ex areas................................................ 6
2.7. Environmental instructions....................................................... 6
3. Product description.......................................................7
3.1. Delivery configuration............................................................... 7
3.2. Principle of operation ............................................................... 7
3.3. Adjustment ............................................................................... 8
3.4. Indicators.................................................................................. 9
3.5. Storage and transport ............................................................ 10
4. Setting-up the operating modes.................................11
4.1. Open the instrument housing ................................................. 11
4.2. Setting up operating modes ................................................... 12
4.3. Close the instrument housing................................................. 13
5. Mounting.......................................................................14
5.1. General instructions ............................................................... 14
5.2. Main dimensions of the instrument ........................................ 14
5.3. Mounting procedure ............................................................... 15
6. Connecting ...................................................................16
6.1. Preparing the connection ....................................................... 16
6.2. Connecting the detectors or the contacts to the inputs. ......... 17
6.3. Connecting the relay contacts and the power supply............. 18
6.4. Put the instrument under supply voltage................................ 18
