Datavan G-615 Manual de usuario
Glamor Series
G-615 / G-615S / G-715 / G-715S(R)
Version 1.1
User Manual
2
About this Manual
Thank you for purchasing Glamor Series Touch Terminal. This terminal offers highly enhanced
features, with easy connection to various optional devices for optimal performance. This user
manual describes how to setup and connect your terminal.
Copyright
© Copyright 2015
All rights reserved. This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written authorization of
the manufacturer and its licensors, if any.
Safety Information
Before you Proceed:
Read the safety notices and the User Manual carefully before using the product.
Keep the box and packaging in case the product needs to be shipped in the future.
Follow the product and warning label instructions.
$Q\FKDQJHVRUPRGL¿FDWLRQVWKDWGRQRWIROORZWKHLQVWUXFWLRQVLQWKLVPDQXDOZLOOYRLGWKLVproduct’s warranty.
Power Supply Safety Notes:
To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
Make sure the voltage of the power outlet conforms within voltage range of the terminal.
Failure to comply may cause the electric shock or damage to the terminal. If you are not
sure of the electricity voltage that you are using, consult your local electricity company.
7RDYRLG¿UHRUHOHFWULFVKRFNVGRQRWRYHUORDGHOHFWULFSRZHURXWOHWVProtect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and the point where they exit from the apparatus.
Operating Instructions
Keep this manual for future reference.
Keep this equipment from moisture and dust.
Place the equipment on a stable surface before setting it up.
3
,IWKHUHLVDQ\RIWKHIROORZLQJVLWXDWLRQDULVHQRWLI\DTXDOL¿HGVHUYLFHWHFKQLFLDQimmediately:
¸The power cord or plug is damaged.
¸Liquid has been spilt on to the equipment.
¸The equipment has been dropped and damaged.
¸The equipment does not function normally.
Do not block any ventilation openings to prevent the equipment from overheat.
Do not leave the equipment in a non air-conditioned environment where the storage
temperature may go above 70°C (158°F), as this can cause damage to the equipment.
Maintenance
Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.
Do not apply pressure to the screen while cleaning.
Do not spray any liquid directly onto the screen or the casing of the terminal.
Chemical cleaners have been reported to cause damage on the screen of the terminal.
Warning and Attention
7KHWHFKQLFDOGHVFULSWLRQVDQGVSHFL¿FDWLRQVRIWKHHTXLSPHQWDUHVXEMHFWWRFKDQJHZLWKRXWnotice.
For safety reasons, wear gloves when assembling the product.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Patent
Patent pending.
CE Statement
A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
If product with laser module, the class of laser should be mentioned. The warning as
attachment.
4
Federal Communications (FCC Statement)
7KLVGHYLFHFRPSOLHVZLWK)&&5XOHV3DUW2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVThis device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesirable operation.
This equipment has been tested and found to comply within the limit of a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by switching the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the interference receiving antenna.
Increase the distance of separation between the equipment and interference receiver.
Connect the equipment to a power outlet on a circuit different from that to which the
interference receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
The use of shielded cables for connection of the monitor to the graphics card is required to assure
FRPSOLDQFHZLWK)&&UHJXODWLRQV&KDQJHVRUPRGL¿FDWLRQVWRWKLVXQLWQRWH[SUHVVO\DSSURYHGE\the party responsible for compliance could void the user’s authority to operate this equipment.
5
CB/LVD Statement
A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
If product with laser module, the class of laser should be mentioned. The warning as
attachment.
CCC Statement
Ԝ䜀B䵠䜨ࠔǴӧғࢲ㣞ნύǴ俗䜨ࠔёૈ㜘ԋ㛐䵸䰃υǶӧ㤄ᳪ㝽ΠǴёૈሡҔ㛌㛱υߍڗϪ㡵ёՉޑࡼǶBSMI Statement
Ǹ!ௗᑻჿᆶᡉҢь܌٬ҔޑٛᅶᢑጕѸዴჴᒥӺGDDೕጄǶ҂ᕇቷܴዴӕཀԶᏰԾᡂ׳܈অׯҁးǴёૈᏤ٬Ҕޣޑ٬ҔѨǴԶคݤᝩុᏹբҁഢǶǸ!٬ҔޣǺ೭ࢂҘᜪޑၗૻౢࠔǴӧۚՐޑᕉნύ٬ҔǴёૈԋᓎυᘋǴӧ೭ᅿݩ٬Ҕޣ௦ڗࢌ٤ޑჹǶWEEE Notice
The WEEE logo (shown at the left) on the product or on its box indicates that this product must
not be disposed of or dumped with your other household waste. You are liable to dispose of
DOO\RXUHOHFWURQLFRUHOHFWULFDOZDVWHHTXLSPHQWE\UHORFDWLQJRYHUWRWKHVSHFL¿HGFROOHFWLRQpoint for recycling of such hazardous waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of disposal will allow us to help conserving
natural resources. Moreover, proper recycling of the electronic and electrical waste equipment
will ensure safety of human health and environment. For more information about electronic and
electrical waste equipment disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you purchased the equipment, or
manufacturer of the equipment.
6
Contents
Chapter 1: Introduction............................................................ 8
Package Contents.................................................................................... 8
Overview of Glamor Series ..................................................................... 9
Front View ...................................................................................................9
Rear View....................................................................................................9
Physical Dimensions .................................................................................11
6SHFL¿FDWLRQV......................................................................................... 14
7RXFK7HUPLQDO6SHFL¿FDWLRQV...................................................................14
3HULSKHUDOV6SHFL¿FDWLRQV.........................................................................17
Chapter 2: Preparing For the Installation............................. 21
System Default Settings........................................................................ 22
0DLQ%RDUG-XPSHU6HWWLQJDQG&RQQHFWRU'H¿QLWLRQ..................... 23
G-615 ........................................................................................................23
G-715 ........................................................................................................25
G-615S ......................................................................................................27
G-715S/G-715SR ......................................................................................30
Signal Convergence Board Connector ................................................ 33
Extension I/O Brick Board Connector
(For G-715SR only) ................................................................................ 34
9ROWDJH2XWSXW'H¿QLWLRQ...................................................................... 35
G-615 / G-715 ...........................................................................................35
G-615S ......................................................................................................35
G-715S/G-715SR ......................................................................................36
Calibrating the Touch Screen in Windows .......................................... 37
Setting the LCD Brightness .................................................................. 39
G-615 ........................................................................................................39
G-715 ........................................................................................................40
G-615S ......................................................................................................42
G-715S/G-715SR ......................................................................................43
7
Chapter 3: Hardware Installation .......................................... 44
Adjusting the System Stand ................................................................. 44
Installing the Power Cord, Power Adapter, and Network Cable ........ 46
Installing the Customer Display (Optional) ......................................... 48
Installing the Secondary LCD Display (Optional) ............................... 50
Installing the IG-20L MSR (Optional).................................................... 54
,QVWDOOLQJWKH,*/LQ,GHQWL¿FDWLRQ5HDGHU2SWLRQDO.............. 56
Installing the Secondary Hard Disk Drive (Optional).......................... 59
Installing the Wireless Module (Optional)............................................ 62
Installing the UPS Kit (Optional)........................................................... 64
Installing the VESA Mount (Optional) .................................................. 66
Chapter 4: Frequently Asked Questions (FAQ) ................... 69
Question 1: Why does the system appear unstable after updating
BIOS? ...................................................................................................... 69
Question 2: How do I clear CMOS?...................................................... 71
Question 3: How to use Boot Menu? ................................................... 74
8
INTR ODUCT ION
Chapter 1
Introduction
Congratulations on your purchase of this Touch Terminal. Your easy-to-use POS terminal is
GHVLJQHGWRKHOS\RXHQKDQFH\RXUEXVLQHVVÀH[LELOLW\E\RIIHULQJVXSHULRUFXVWRPHUH[SHULHQFHPackage Contents
Before setting up your Touch Terminal, check that the package contains the following items. If any
of the items is missing or damaged, contact your vendor immediately.
Quick
Installation Guide
Touch Terminal Power Cord & Adapter Accessory Kit
Optional Accessories
VESA plate
(for VESA model only)
Customer Display
(VFD/LCM)
Second LCD Display (8”/10”)
RFID
065,GHQWL¿FDWLRQReader
MSR+iButton
,GHQWL¿FDWLRQ5HDGHU5),',GHQWL¿FDWLRQReader
Fingerprint
,GHQWL¿FDWLRQ5HDGHUL%XWWRQ,GHQWL¿FDWLRQReader
Second Hard Disk
Drive Installation Kit
Wireless Module UPS Kit
INTR ODUCT ION
9
Overview of Glamor Series
7KH¿JXUHVLQWKLVVHFWLRQLOOXVWUDWHWKHFRPSRQHQWVLQFOXGLQJLQSXWDQGRXWSXWSRUWVORFDWHGDWthe front and rear of your Touch Terminal.
Customer Display Type Secondary LCD Display Type
NOTE:/&09)'FXVWRPHUGLVSOD\LVDQRSWLRQDODFFHVVRU\VHFRQG/&'GLVSOD\LVDQRSWLRQDODFFHVVRU\ZLWK,*LGHQWL¿FDWLRQUHDGHUZLWK,*LGHQWL¿FDWLRQUHDGHUNOTE:,*LGHQWL¿FDWLRQUHDGHULVDQRSWLRQDODFFHVVRU\,*LGHQWL¿FDWLRQUHDGHULVDQRSWLRQDODFFHVVRU\Front View
Standard Type
Rear View
Standard Type
10
INTR ODUCT ION
I/O Ports
USB 12V USB 24VUSB 12V
USB COM
*for G-715SR only.
Item Description
'&287MDFN12V DC power output
'&,1MDFN24V DC power input
COM ports COM connectors
K/B port PS/2 keyboard connector
DK port Cash Drawer output
E-SATAp port E-SATA + USB connector
USB2.0 ports USB2.0 connectors
USB3.0 ports USB3.0 connectors
LAN port Gigabit LAN connector
VGA port VGA output connector
Line Out port Audio line output connector
HDMI port HDMI Vertical connector
USB 12V 12V Powered USB connector
USB 24V 24V Powered USB connector
G-615 / G-715
G-615S
G-715S(R)
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Terminal táctil de Datavan
Datavan
Datavan HiFive Series Manual de usuario
Datavan
Datavan Wonder Series Manual de usuario
Datavan
Datavan ARC Series Manual de usuario
Datavan
Datavan S-615W Manual de usuario
Datavan
Datavan HiFive Series Manual de usuario
Datavan
Datavan Neptune N-1945 Manual de usuario
Datavan
Datavan Glamor Series Manual de usuario
Datavan
Datavan G-615S Manual de usuario
Datavan
Datavan ARC Series Manual de usuario
Datavan
Datavan G-615S Manual de usuario
