Datalogic Magellan 1500i Manual de usuario
Magellan™ 1500i
Omnidirectional Imaging Scanner
Quick Reference Guide
Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno — Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2018 Datalogic S.p.A. and/or its affiliates
An Unpublished Work — All rights reserved. No part of the contents of this docu-
mentation or the procedures described therein may be reproduced or transmitted in
any form or by any means without prior written permission of Datalogic S.p.A. and/
or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive,
revocable license to reproduce and transmit this documentation for the purchaser's
own internal business purposes. Purchaser shall not remove or alter any propri-
etary notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed ver-
sions by contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U.
Magellan is a trademark of Datalogic S.p.A. or of Datalogic and/or its affiliates, reg-
istered in many countries, including the U.S. and the E.U.
Patents
See www.patents.datalogic.com for patent list.
See the Regulatory Addendum included with your product
for additional regulatory, safety and legal information.
Quick Reference Guide i
Table of Contents
Quick Reference....................................................................1
Features ................................................................................1
Installation ............................................................................3
Optional Stand/Riser....................................................3
Removing the Stand/Bottom Cover ....................4
Magnetic Base Mounting .............................................4
How to Scan ..........................................................................5
Handheld Scanning Mode ............................................5
Center Zone Qualification.............................................6
Scanner Button..............................................................6
Scanner Button Functions ....................................6
LED and Beeper Indicators ..................................................8
Programming ......................................................................10
Service Port Mode................................................10
Using Barcodes............................................................10
Interface Selection ......................................................11
Good Read Green Spot Duration................................12
Cell Phone Mode..........................................................13
Contents
ii Magellan™ 1500i
Cell Mode Frequency...................................................14
Troubleshooting..................................................................15
Error Codes...................................................................16
Cleaning ...............................................................................17
Manufacturer Approved Cleaning Materials ............18
Warranty..............................................................................19
Quick Reference Guide 1
Magellan™ 1500i
Quick Reference
This guide is provided to help get your scanner up and running
quickly and efficiently. For more details, including additional pro-
gramming information, reference the Product Reference Guide
(PRG), which is available from the Datalogic website.
Features
Figure 1. Scanner Features - Front View
Tilting Stand
Good Read Light Pipe/
Scan
Window
Beeper Grille
Illumination LEDs
Scanner Button
2 Magellan™ 1500i
Figure 2. Scanner Features - Bottom View
Figure 3. Labeling
NOTE
Remove the stand/cover to view the Regulatory
Labeling, as described on page 4. Labels are
shown to illustrate their location only. Please view
the labels on your product for actual details.
Power/Interface
Power/interface Cable
Latch Release Hole
Stand
Regulatory
Label (under
Regulatory
Label (under
Serial Number bottom cover)
bottom cover)
Quick Reference Guide 3
Installation
Route the interface cable from the terminal or host. Plug the AC
adapter (if one is used) into a wall outlet and the interface (I/F)
cable, then route and attach the I/F cable to the scanner. Verify
operation by presenting known-good bar codes to the scanner.
The unit should beep1and/or flash its good read LED and send
the bar code data to the host or terminal. If not, refer to the Trou-
bleshooting section of this guide.
Scanner installation is complete.
The Magellan 1500i uses intelligent illumination technology to
optimize light levels for a variety of bar code scanner functions
including automatic reading of bar codes from printed surfaces,
mobile devices and image capture in variable contrast environ-
ments.
Optional Stand/Riser
An optional stand / riser is available for the scanner. The stand
and riser have anti-skid pads on the bottom and can rest on any
desired horizontal surface or countertop. The scanner (along with
the stand/riser) can be easily repositioned on the counter or
lifted for portable use.
1. Beeper and LED behavior is selectable and may have been disabled by a previous
user.
A/C Adapter
(if needed)
To Host/Terminal
Connect
Here I/F Cable
4 Magellan™ 1500i
Removing the Stand/Bottom Cover
1. Unplug the Power Interface Cable by inserting a paper clip or
similar object into the latch release hole as shown in
Figure 2 on page 2.
2. After removing the Interface Cable, pull the bottom of the
Stand forward (in the direction of the Front Window) to
detach it from the unit. It will snap free easily if oriented cor-
rectly.
Magnetic Base Mounting
The magnetic swivel base can be used to semi-permanently
attach a scanner to a flat surface (vertical or horizontal), using
the provided adhesive or screw. Both the stand and riser options
mount onto the magnetic swivel base and are held magnetically
in place. The scanner can easily be rotated to a desired orienta-
tion. The scanner (along with the riser or stand) can be detached
for portable use by lifting the entire unit as shown in Figure 4 on
page 5.
CAUTION
Do not attempt to remove the Stand without first
unplugging the Cable as described. Doing so may result
in damage to the scanner.
Front Window
Stand
Quick Reference Guide 5
How to Scan
Bar codes can be presented to the scanner while it is resting on
the counter or in the optional stand, or the scanner can be picked
up for targeted scanning.
Figure 4. Scanning Methods
Handheld Scanning Mode
To read a barcode using Handheld Scanning Mode:
1. Pick up the scanner- the aimer LED will illuminate automat-
ically.
2. With the aimer over the barcode to be read, press and
release the button.
Upon a successful read, the button will blink bright green and the
GreenSpot™ will illuminate, highlighting the decoded barcode.
Scan Button/
PRESENTATION MODE
Good Read
HANDHELD MODE
Indicator
6 Magellan™ 1500i
Center Zone Qualification
The configurable Center Zone can be set to limit the scan area to
allow Targeted Scanning of pick lists or other special items. Bar
codes will read in any orientation. The scanner will return to full
pattern Presentation Mode when set back down, after a configu-
rable time has elapsed.
Scanner Button
The Scanner Button performs multiple functions, depending on
how long it is pressed:
Scanner Button Functions
NOTE
The Scanner Button functions shown below are opera-
tional only when the Scanner is stationary. When in
Hand/Portable mode, the button acts as a trigger to
enable the reading of a barcode label.
PRESS
DURATION FUNCTION COMMENT
Momentary
(when scanner is
asleep)
Wakes scanner from
Sleep Mode
Alternatively, the scanner can
be awakened by moving an
object through the scan zone.
Momentary
(when scanner is
awake)
Increments volume
Press the button momentar-
ily to increase speaker vol-
ume. When the loudest
volume is reached, a repeated
press of the button cycles
volume back to the lowest
setting, then volume
increases on subsequent
press(es). Five volume levels
are available.
Otros manuales para Magellan 1500i
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Lector de código de barras de Datalogic
Datalogic
Datalogic DS6300 Manual de usuario
Datalogic
Datalogic DX6400 Manual de usuario
Datalogic
Datalogic Matrix 320 Manual de instalación y operación
Datalogic
Datalogic DX6400 Manual de usuario
Datalogic
Datalogic Gryphon I GBT4400 2D Manual de usuario
Datalogic
Datalogic Dragon Manual de usuario
Datalogic
Datalogic QuickScan BC2030 Manual de usuario
Datalogic
Datalogic PowerScan M8500 Manual de instalación y operación
Datalogic
Datalogic Magellan 1100i Manual de instalación y operación
Datalogic
Datalogic DS6100 Manual de usuario
Datalogic
Datalogic Gryphon GM41XX Manual
Datalogic
Datalogic PowerScan PBT9500 Manual de usuario
Datalogic
Datalogic Compact 2D Reader Matrix-2000 Manual de usuario
Datalogic
Datalogic PowerScan BC96 Series Manual de usuario
Datalogic
Datalogic Gryphon I GD44XX Manual de usuario
Datalogic
Datalogic Quickscan I Manual de usuario
Datalogic
Datalogic DX8210 Manual de usuario
Datalogic
Datalogic Heron HD3130 Instrucciones de instalación y funcionamiento
Datalogic
Datalogic CBX800 Manual de usuario
Datalogic
Datalogic QuickScan QM21 1 Series Manual de usuario
