DataExpert ATX431 Manual de usuario

ATX431

User’s Manual

SMART SOFT-CPU Fast and Easy

Latest Jumperless Design

451-043100000

REVISION:C

19-Sep-1997

DECLARATION OF CONFORMITY

APPLICATION OF COUNCIL DIRECTIVE(S):

89/336/EEC

STANDARD TO WHICH CONFORMITY IS DECLARED:

EN 55022:1994/A1:1995 CLASS B

EN 50082-1 (IEC 801-2:1984, IEC 801-3:1984, IEC 801-4:1988)

MANUFACTURER : DataExpert Corporatio

ADDRESS : BREGUETLAAN 1, 1438 BA OUDE MEER, THE NETHERLANDS

TELEPHONE : +31 (20)-653-2243 FAX: +31 (20)-653-2265

TYPE OF PRODUCT : Moth rboard

MODEL NO. : ATX431

I, the undersigned, hereby declare that the equipment specified above conforms to the

above Directive and Standards.

S I G N A T U R E

V ICE P R E S I D E N T

P O S I T I O N T I T L E

JULY, 17, 1997

D A T E O F I S S U E

USER’S NOTICE

No part of this product, including the hardware and software, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form by any means without the express written permission of

DataExpert Corporation. (hereinafter referred to as DataExpert) except

documentation ept by the purchaser for bac up purposes.

Specifications are subject to change without notice. DataExpert provides this

manual “as is” without warranty of any ind, either express or implied, including

but not limited to the implied warranties or conditions of merchantability or

fitness for any particular purpose. In no event shall DataExpert be liable for any

loss or profits, loss of business, loss of use or data, interruption of business, or for

indirect, special, incidental, or consequential damages of any ind, even if

DataExpert has been advised of the possibility of such damages arising form any

defect or error in this manual or product. DataExpert may revise this manual from

time to time without notice.

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademar s

or copyrights of their respective companies.

·Intel and Pentium are registered trademar s of Intel Corporation.

·Windows and MS-DOS are registered trademar s of Microsoft Corporation.

The product name and revision number are both printed on the board itself.

Manual revisions are released for each board design represented by the digit

before and after the period of the manual revision number. Manual updates are

represented by the revision ID shown on the bac of this manual. For previous or

updated manual, BIOS, drivers, or product release information you may visit our

home page at: http://www.dataexpert.com.tw/.

INSTALLATION GUIDE

CPU - It is recommended for installation of AMD K6 MMX 233 and Cyrix M1

PR200 CPU to be installed with certified CPU Cooler (Big Cooler) from the

approved suppliers. Insufficient Cooling for the CPU may render the system

unstable. Our SMART SOFT capabilities BIOS will chec for the ID code of the

CPU and if the CPU ID code does not match your CPU mar ing, then return them

as it is re-mar ed from the original mar ing. Chec that the CPU is firmly

installed on the CPU soc et and CPU Cooler secured before powering up the

system.

Memory - Best Recommended for 60ns EDO DRAM on SIMMs memory. Do

not mix SDRAM (3.3V) with EDO 5V type of memory. Please chec for re-

mar ed 60ns EDO DRAM by visual inspection of the surface on the components.

Most re-mar ed memory will show polished surface. We do not guarantee

reliability for re-mar ed memory. For BIOS setting for DRAM configuration, it is

advisable to set the default setting for initial chec ing of the system. Good

performance needs all installed configuration device installed for excellent quality

including memory, hard dis , VGA and others.

Hard Disk - For best performance, it is best recommended to install Ultra

DMA/33 mode hard dis . It wor s in conjunction with Ultra DMA 33 drivers on

our utility dis attached.

VGA - For best compatibility, the ATX431 has been tested with famous VGA

brand li e ExpertColor VGA, Diamond, ATI, Matrox series. The VGA should be

4 layers PCB type for good display reliability with certified EMI test li e CE or

DOC (FCC).

BIOS - Setup the system as “Optimal Default Setting”.

Cab es - ATX431 can prevent reverse connection with connector brac et.

Chec if each cables has been connected to their respective device before power-

up.

Trademarks and/or registered trademarks are the

properties of their respective owners:

The information in this publication has been carefully for reliability; however, no

responsibility is assumed for inaccuracies. Specifications are subject to change

without notice.

IBM, PC/AT, and PC/XT are trademar s of International Business Machines

Corporation.

Pentium is a trademar of Intel Corporation

MS-DOS and WINDOWS NT are register trademar s of Microsoft Corporation.

Cyrix is a trademar of Cyrix Corporation

AMD is a trademar of Advanced Micro Devices, Inc.

Static E ectricity Precautions

Static electricity can easily damage your mainboard. Observing a few basic

precautions can help you safeguard against damage that could result in expensive

repairs. Follow the measures below to protect your equipment from static

discharge:

·Keep the mainboard and other system computers in their antistatic pac aging

until you are ready to install them.

·Touch a grounded surface before you remove any system component from its

protective anti-static pac aging. A grounded surface within easy reach is

the expansion slot covers at the rear of the system case. Or any other

unpainted portion of the system chassis.

·During configuration and installation, touch a grounded surface frequently to

discharge any static electric charge that may build up in your body.

Another option is to wear a grounding wrist strap.

·When handing a mainboard or an adapter card, avoid touching its

components. Handle the mainboard and adapter cards either by the edges

or by the mounting brac et that attaches to the slot opening in the case.

Unpacking the Mainboard

The mainboard comes pac ed in a sturdy cardboard shipping carton. The carton

contains:

·The Mainboard

·This User’s Manual

Note: Do not remove the mainboard from its original packing until you are ready

to install it.

The mainboard is easily damaged by static electricity. Observe the following

precautions while unpac ing and installing the mainboard.

1. Touch an unpainted area of system chassis before handling the mainboard or

any component. Doing so discharge the static charge your body may

have built.

2. Remove the mainboard for appearance chec ing. Shipping may have

lossened integrated circuits from their soc ets. If any integrated circuit

appears loose, press carefully to seat it firmly in its soc et.

Do not apply power if the mainboard appears damaged. If there is damage to the

board, or items are missing, contact your dealer immediately.

Power Precautions

Before you begin configuration, ma e sure you are wor ing with an unplugged

mainboard. Many components are powered by low-voltage current, but there still

may be a dangerous electric current coming from the leads and power supply.

You should ta e the following precautions:

·Turn off the power supply, and unplug the power cord before you

begin.

·Unplug all cables that connect the mainboard to any external devices.

Note: Before making connections to the board, make sure that power to the system

is turned off.

TABLE OF CO TE TS

CHAPTER 1 I TRODUCTIO .....................................................1

1.1 Overview.................................................................................2

1.2 System eatures....................................................................3

1.3 System Specifications............................................................4

1.4 System Performance..............................................................5

1.5 ATX431 Board Layout............................................................6

1.6 Setting Other Jumper & Connectors......................................7

CHAPTER 2 I STALLATIO ......................................................10

2.1 Installing DRAM....................................................................10

2.2 Possible Memory Configurations..........................................12

2.3 Installing CPU with SMART SO T eature.........................14

2.4 Installing lash ROM Utility..................................................16

CHAPTER 3 SYSTEM BIOS SETUP..........................................18

3.1 Standard CMOS Setup.........................................................19

3.2 Advanced CMOS Setup.......................................................21

3.3 Advanced Chipset Setup......................................................26

3.4 Power Management Setup...................................................28

3.5 PCI/PnP Setup......................................................................32

3.6 Peripheral Setup...................................................................35

3.7 Smart Soft CPU Setting........................................................39

RMA FORM

Chapter 1: ntroduction

CHAPTER 1

INTRODUCTION

Attention:

For new CPU installation, please press the “Home” ey to clear the previous

setting to return to Default Setting. To configure your CPU, choose the SMART

SOFT Setting from the BIOS Setup Screen. You can then set the CPU frequency

or others.

IMPORTA T OTICE

After you have assembled the motherboard with its system conguration

installed, check that all the cables attached are correctly connected as

required before powering on the system. The rst procedure you are

required to do is to press the “D L” key on the keyboard during displaying

memory counting and access the “System BIOS Setup”. Select the “SMART

SOFT CPU Setting” to congure the CPU speed according to the CPU

installed.

SMART SOFT provides you with CPU Auto-Voltage Detection, CPU ID type

and Soft frequency setting on the BIOS “SMART SOFT CPU Setting” option.

You need only to setup the CPU speed type on the BIOS according to the CPU

installed. In the case of wrong or over-rating setting of the CPU Frequency

which exceeds your CPU speed limit, it may render the system failure to

bootup, or no display at all. SMART SOFT provides you with the “Return to

Default setting” for minimal CPU setting.

Press the “HOME” key on the keyboard simultaneously upon

power-up for the system to return to efault setting.

This action will clear the CMOS memory for the system conguration to

Default value. You can also Hardware Clear CMOS with the jumper

indicated on the motherboard.

1 1 Overview

The ATX431 motherboard optimized for MMX CPUs incorporates the latest

jumperless technique “SMART SOFT” for CPU fast and easy installation. Additional

built-in features include PC Doctor Monitoring for CPU overheated protection with

ALARM warning and CPU slow-down to protect system crash during overheated

condition. With on-board 512K L2 write-bac cache, it provides wor station level

computing performance at PC system level.

The ATX431 design provides Auto-ban ing for memory expansion with 4x SIMMs or

2x DIMMs soc ets. It can support up to 256MB of DRAM.

The ATX431 motherboard provides outstanding I/O capabilities with 4x PCI 2.1 bus

mastering slots for a high bandwidth data path for data-movement intensive functions

such as graphics acceleration and its advanced features for a cost effective, high

performance, and highly expandable platform.

1 2 System Features

The ATX431 has many performance and system features integrated into the

motherboard, including the following:

·Intel 430TX Pentium-based Motherboard, based upon ATX orm- actor, using

512K Pipeline Burst SRAM Cache.

·Supports Intel Pentium amily CPU running at 90MHz~200MHz (P54C), Intel

Pentium with MMX 166/200/233MHz (P55C), AMD K5 Pentium-level CPU

100/133/166, AMD K6 166/200/233 MMX CPU and Cyrix 6x86

133/150/166/200 & 6x86 MX 166/200/233 CPU.

·Provides Advanced Switching Voltage techniques to support low Thermal

Power Dissipation design with Auto-voltage detection for CPUs.

·Integrated Programmable 2 fast serials (16550) / 1 Parallel

(Standard/ECP/EPP) / DC controller / PS/2 Mouse Port, 2 x PCI Bus

Master (DMA/33 Mode) IDE controllers.

·Provides 3 x 16-bit ISA slot & 4 x Concurrent PCI 2.1 expansion slot.

·Supports Auto-banking 8MB~256MB Memory utilizing 4 x 72 pin EDO/ PM

SIMMs or 2 x 3.3V 168-pin DIMMs for SDRAM expansion.

·Support lash BIOS for Plug & Play/DMI/Anti-virus/LS120 technology (120MB

Capacity) features to provide an easy-to-use add-on cards configuration for

users.

·Supports optional Universal Serial Bus Port and Infrared IR port (115.2

Kbps/Sec) pin header ready.

·Hardware Monitor Circuit for CPU Temperature Status, CPU temperature

overheated protection with alarm warning and CPU Auto slow-down feature.

·Provides “SMART SO T” (Auto Voltage / Soft requency) techniques for fast

and easy CPU installation and upgrade.

Tabla de contenidos

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario