Data-Tronix DT-HDIPUS Manual de instrucciones

USER GUIDE & INSTALLATION MANUAL

DT-HDIPUS

HD IP Streaming Server

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 2

Table of Contents

SAFETY PRECAUTIONS................................................................................................................ 3

PACKAGE CONTENTS .................................................................................................................. 3

PRODUCT DESCRIPTION.............................................................................................................. 4

SPECIFICATIONS........................................................................................................................... 5

INSTALLATION............................................................................................................................... 6

UNPACKING AND INSPECTION.................................................................................................... 6

HARDWARE INSTALLATION AND CONNECTIONS .................................................................... 6

FRONT-PANEL ............................................................................................................................... 7

CONNECTING TO THE GUI INTERFACE:..................................................................................... 8

FACTORY DEFAULT IP: 192.168.1.9 ................................................................................................ 8

LOGIN USER AND PASSWORD.................................................................................................... 9

ENCODER SETUP ........................................................................................................................ 10

VIDEO CONTROL ........................................................................................................................... 11

AUDIO CONTROL ........................................................................................................................... 12

COLOR CONTROL.......................................................................................................................... 13

STREAMING SETUP .................................................................................................................... 15

STREAM SERVER .......................................................................................................................... 15

BROADCASTING ............................................................................................................................ 16

NETWORK CONFIGURATION ..................................................................................................... 18

DEVICE NETWORK......................................................................................................................... 18

DLNA SETTINGS........................................................................................................................... 19

ADMINISTRATION........................................................................................................................ 20

STREAMING METHODS CASES ................................................................................................. 22

CASE 1: DLNA STREAMING ........................................................................................................... 23

CASE 2: UDP/RTP MULTICASTING................................................................................................. 25

CASE 3: TCP/UDP/RTP UNICASTING ............................................................................................ 28

HDIP STREAMING SERVER NOTES........................................................................................... 30

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 3

SAFETY PRECAUTIONS

The presence of this symbol is to alert the installer and user to the presence of

uninsulated dangerous voltages within the product’s enclosure that may be of

sufficient magnitude to produce a risk of electric shock.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING

TO QUALIFIED PERSONNEL ONLY.

DO NOT apply power to the unit until all connections have been made, all components have been

installed and all wiring has been properly terminated.

DO NOT terminate, change or uninstall any wiring without first disconnecting the unit’s power

adapter from the device.

This device is supplied with the appropriately rated 12VDC power supply with the center pin

positive. The use of any other power supply could cause damage and invalidate the

manufacturer’s warranty.

DO NOT power on the unit until all cables and connections to the device have been properly

connected.

The device should be installed in an environment consistent with its operating temperature

specifications. Placement next to heating devices and ducts is to be avoided as doing so may

cause damage. The device should not be placed in areas of high humidity.

DO NOT cover any of the device’s ventilation openings.

If the device has been in a cold environment allow it to warm to room temperature for at least

2 hours before connecting power.

PACKAGE CONTENTS

This package contains:

One DT-HDIPUS IP Streaming Server

One Power Adaptor

One installation / configuration manual (An eManual will be supplied)

Inspect the package before starting installation to ensure there is no damage and all supplied

contents are present. Contact your distributor or dealer if the device is damaged or package contents

are incomplete.

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 4

PRODUCT DESCRIPTION

DATATRONIX's DT-HDIPUS HD IP Streamer allows the user to stream any one audio/video source

over an IP Network to multiple Smart HDTVs or connected computers within the IP Network. The IP

Streamer accepts an HDMI, Component, or Composite video input and the unit is designed to deliver

a rich HD/SD Streaming experience for its users deploying MPEG-2 or MPEG-4 standards.

The DT-HDIPUS HD Streaming server enables high-definition streaming with resolutions up to

1080p, providing a high quality viewing experience for your customer. The unit is MPEG-2 or MPEG-4

switchable and supports UDP/RTP Streaming. The compact design saves space and is easily

controlled via a web UI for rapid deployment.

The HDIP series features:

•Dual Mode H.264 (AVC) / MPEG-2 selectable output

•Video resolution: Up to 1080p60(H.264 only)

•HDMI, Component, Composite inputs with auto detection

•UDP/RTP/ Unicast/Multicast, DLNA Compatible, TCP

•Closed Captioning Support

•Output audio format: MPEG-1-Layer2(MP2), AAC, Supports Dolby®Digital encoding

o*Dolby is a trademark of Dolby Laboratories.

•Gigabit Ethernet port

•Web UI for setup and control

•Quick and Easy installation and use

•Light weight and compact design

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 5

SPECIFICATIONS

Video / Audio Input

HDMI

Connectors Single

Audio

Embedded PCM /

AC-3 Pass Through

Component

Connectors Single

Composite

Connectors Single

Audio Analog Audio L & R

Coaxial (Coax S/PDIF)

Connectors Single

Optical (S/PDIF)

Connectors Single

IP Output

GigE

Connector RJ-45

Standard 1000Base-T Ethernet, Full Duplex

IP Streaming Protocol

HTTP Embedded

TCP Unicast

UDP/RTP Unicast / Multicast

DLNA Media Server 1.5

Web Management

GigE

Connector RJ-45

Standard 1000Base-T Ethernet, Full Duplex

HTTP Embedded

UPnP Embedded

Video/ Audio Encoding Profile

Video

Resolution 1080p (H.264 Only) /1080i/720p/480p/576i/480i

Video Codecs

MPEG-2 VBR/CBR

Video Codecs H.264 VBR/CBR

Video Codecs

H.264 (HD)

>1080p30, HP@Level 4.2/≦1080p30,

HP@Level 4 >720p30,

HP@Level 3.2/ ≦720p30, HP@Level 3.1

Video Codecs

H.264 (SD) Frame Rate > 30, MP@Level 3.1 / ≦30, Level 3

Aspect Ratio 4:3 &16:9

Video Bitrate

MPEG-2: 10.0~20.0 Mbps (HD)/

2.0~8.0 Mbps (SD)

H.264: 2.0~10.0Mbps (HD) / 1.0~4.0 Mbps(SD)

Audio

Audio Codecs MPEG-1 Layer II / MPEG-

2 AAC /

MPEG-4 AAC/ AC-3 / AC-3 Pass Through

Closed Caption

RCA (Y) EIA-608; 1x RCA (cc)

MISC

GOP Closed

General

Local Monitoring 8 LEDs

GUI Supported Firefox, Chrome

Password

Protected GUI: Changeable

Power Supply 12VDC 1.5Amp.

Consumption 6W Typical

Dimension

Housing

9.29" x 6.10" x 1.37"

(236mm x 155mm x 35mm)

Weight 2 lbs. and 1.1575 oz. (940g)

Language English

Manufactured under license from Dolby Laboratories.

** Specifications subject

to change without notification.

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 6

INSTALLATION

System Installer must adhere to Article 820-40 of the NEC that provides

guidelines for proper grounding and specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable

entry as possible.

UNPACKING and INSPECTION

Each unit is shipped factory tested. Ensure all items are removed from the container prior to

discarding any packing material.

Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls.

If there is any sign of damage to the unit or damaged or loose connectors contact your distributor

immediately. Do not put the equipment into service if there is any indication of defect or damage.

HARDWARE INSTALLATION and CONNECTIONS

It is highly recommended that quality cables and connectors be used for all video and audio

source connections

1. Connect the media source (Satellite STB, Media player, or other media device) to the HDIP

streaming server by HDMI, YPbPr (Component), or CVBS (Composite) cables.

2. Connect the HDIP streaming server to local area network (LAN)

3. Plug the power adapter to the device and power up

4. Network Setup

5. There are three (3) use cases supported by HDIP streamer: DLNA media server,

UDP/RTP/ multicasting, and TCP/UDP/RTP/ unicasting.

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 7

Front-Panel

Buttons/LEDs

Description

Reboot button

Reboots the device (unsaved settings will be lost)

RST / UPG

button

To reset all the settings of the device to factory

default:

1. 1.Press and hold the RST/UPG button and then

connect power to the device while pressing in the

RST/UPG button.

2. 2.Hold the button until CFG led to flashes 10 times

(about 10 seconds)

3. 3.After the CFG led stops flashing -release the

button

To upgrade firmware using the USB port:

1. 1.Plug-in the USB drive with the upgraded firmware

image (“hdip_upg.img”)

2. 2.Press and hold the RST/UPG button and boot-up

the device

3. 3.USB led will flash while copying the image from

USB drive (about 3~5 seconds)

4. 4.Wait until the CFG led stop flashing

5. 5.Release the RST/CFG button and wait for the

device to reboot and upgrade the firmware (about 1

minutes)

PWR Power is ON

CFG Indicates device is in configuration mode

USB Indicates USB drive is mounted

MPEG-2 Indicates device is encoding video using MPEG-2

H.264 Indicates device is encoding video using H.264

MP2 Indicates device is encoding audio using MPEG-1 Layer 2

AAC

Indicates device is encoding audio using AAC

Dolby Digital Indicates device is encoding audio using Dolby Digital

For

Recording IP

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 8

Connecting to the GUI Interface:

Factory Default IP: 192.168.1.9

1. Connect an Ethernet cable directly (no Cross Over cable required) to the Web Management

Port on the rear panel of the encoder or connect the Ethernet cable to an Ethernet switch.

Connect an Ethernet Cable to your PC/Laptop.

2. Modify your PC/Laptop IP address to 192.168.1.100.

3. Enter ‘192.168.1.9:8888’into your web browser.

4. Enter GUI and make required device changes.

5. Save all changes as required, upload and reboot changes.

6. Verify parameters then end web session.

Overview / Welcome page displays current status of the encoder including Input type, Output format type,

Output Bitrate, Actual Output, Encoder Status, and # of connected Clients.

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 9

On the Welcome Screen, we have added a tool to help the installer locate a unit in a rack or headend.

Press the LED ON button (shown below). This will cause the CFG LED light to flash continuously for

the installer to identify and locate the HDIP.

To turn off, simply press the LED tool again.

Once the Welcome Page is displayed select the Encoder Setup tab and the below Login “Authentication

Required” screen will be presented. Enter the User Name and Password then click Login.

User Name: admin Default Password: Admin123

Note: User Password can be changed –See Administration

Page.

Click Here to

Enable/Disable

NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0 Page 10

Encoder Setup

Tabla de contenidos

Otros manuales de Servidor de Data-Tronix

Data-Tronix

Data-Tronix DT-HDIPCOM Hoja de instrucciones

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario