Data Modul EDM-CB-SM-IPCS Manual de usuario

eDM-CB-SM-IPCS

REFFERENCE MANUAL

www.data-modul.com

2 12048231 Rev. 00 (Draft)

DATA MODUL AG | www.data-modul.com

Document Revision History

Revision

Revision History

Date

Draft version

12.12.2021

Reference to this Operating Manual

The purpose of all the figures and illustrations in this User Manual is merely to provide a better explanation and

can differ to the actual appearance of the devices. They are to be understood as schematic representations.

Trademarks:

Although all the information contained within this document is carefully checked, no guarantee of correctness is

implied or expressed. All brand or product names are trademarks or registered trademarks of their respective

owners.

Technical and optical changes as well as misprints reserved.

 
 
 
 
 
12048321 Rev. 01 (Draft) 3
 
DATA MODUL AG | www.data-modul.com 
Contents 
Contents.................................................................................................................................................................................. 3 
Preface....................................................................................................................................................................... 6 
1. Using this Document.............................................................................................................................................. 6 
2. Purpose of this Document...................................................................................................................................... 6 
3. Danger Symbols & Levels...................................................................................................................................... 6 
Danger Symbols............................................................................................................................................................... 6 
Danger Levels.................................................................................................................................................................. 6 
General Symbols.............................................................................................................................................................. 6 
4. Technical Support.................................................................................................................................................. 7 
5. List of Abbreviations............................................................................................................................................... 7 
6. General Connector Signal Description................................................................................................................... 8 
7. Industry Specifications........................................................................................................................................... 8 
Standards & Certifications.......................................................................................................................................... 8 
1. SMARC Standard .................................................................................................................................................. 8 
2. Material Compliance.............................................................................................................................................. 8 
3. EMC Standards...................................................................................................................................................... 8 
4. Safety..................................................................................................................................................................... 8 
5. Shock & Vibration .................................................................................................................................................. 8 
6. Environmental Conditions...................................................................................................................................... 8 
7. Functional Block Diagram...................................................................................................................................... 9 
8. Ordering Information............................................................................................................................................ 10 
9. Connector Positions............................................................................................................................................. 10 
10. Connector List...................................................................................................................................................... 11 
11. Power Supply....................................................................................................................................................... 12 
Input Voltage.................................................................................................................................................................. 12 
External Connectors (IO-Shield)............................................................................................................................... 13 
1. Gigabit Ethernet 0/1............................................................................................................................................. 13 
2. Micro-SD Socket.................................................................................................................................................. 14 
3. Line-Out Audio Connector.................................................................................................................................... 15 
4. USB 2.0 Dual Type-A Connector......................................................................................................................... 16 
5. DisplayPort Connector......................................................................................................................................... 17 
6. USB 3.0 Dual Type-A Connector......................................................................................................................... 17 
7. USB Single Type-C Connector ............................................................................................................................ 18 
Internal Connectors.................................................................................................................................................. 19 
1. SMARC Connector .............................................................................................................................................. 19 
2. Power IN Supply Voltage Connector.................................................................................................................... 29 
3. M.2 Key A Connector........................................................................................................................................... 30 
4. M.2 Key B Connector........................................................................................................................................... 31 

 
 
 
 
 
 
12048231 Rev. 00 (Draft) 
 
DATA MODUL AG | www.data-modul.com 
5. Nano-SIM Connector........................................................................................................................................... 31 
6. M.2 Key M Connector.......................................................................................................................................... 32 
7. SATA 7-Pin Connector......................................................................................................................................... 33 
8. USB 2.0 Port 1D on Molex PicoBlade.................................................................................................................. 34 
9. USB 2.0 Port 1B/C on 9-pin Pin-header............................................................................................................... 35 
10. USB 3.0 19-pin Pin-header.................................................................................................................................. 36 
11. SPI0 Socket / Pin-header..................................................................................................................................... 37 
12. SPI0 Socket / Pin-header..................................................................................................................................... 38 
13. UART SER0 Connector....................................................................................................................................... 39 
14. UART SER1 Connector....................................................................................................................................... 40 
15. RS485 (SER2) Connector.................................................................................................................................... 41 
16. RS232 (SER3) Connector.................................................................................................................................... 42 
17. I2S Audio Microphone.......................................................................................................................................... 43 
18. Audio Frontpanel Pin-header............................................................................................................................... 44 
19. CAN0 Connector.................................................................................................................................................. 45 
20. LVDS Display Connector..................................................................................................................................... 46 
21. V-By-One Display Connector............................................................................................................................... 48 
22. V-By-One Display-Power-Connector (TCON)...................................................................................................... 51 
23. LVDS Display Backlight Connector...................................................................................................................... 52 
24. V-By-One Display Backlight Connector ............................................................................................................... 53 
25. System-Fan Connectors ...................................................................................................................................... 54 
26. DOOR Contact Connector ................................................................................................................................... 55 
27. Infrared-IF Connector........................................................................................................................................... 56 
28. GBE0,1 Precision Time Protocol Extension Connector ....................................................................................... 57 
29. Data Modul Feature Connector............................................................................................................................ 58 
30. Piezo-Speaker (Buzzer)....................................................................................................................................... 60 
31. RTC-Battery Internal Connector........................................................................................................................... 61 
32. RTC-Battery CR2023 Socket............................................................................................................................... 61 
33. System-I2C Connectors....................................................................................................................................... 62 
34. System-I2C 5V Connectors.................................................................................................................................. 63 
35. External Power-Button Connector........................................................................................................................ 63 
Jumpers, Switches and Status LEDs ....................................................................................................................... 64 
1. Boot-Select Jumper ............................................................................................................................................. 64 
2. V-TCON Selection Jumper................................................................................................................................... 65 
3. Power-Button....................................................................................................................................................... 66 
4. Reset-Button........................................................................................................................................................ 66 
5. System-State Status LEDs................................................................................................................................... 67 
6. M.2 and SATA-Activity LEDs ............................................................................................................................... 67 
7. USB Type-C Status LEDs.................................................................................................................................... 67 

 
 
 
 
 
12048321 Rev. 01 (Draft) 5
 
DATA MODUL AG | www.data-modul.com 
8. USB Type-C Multiplexing Scheme....................................................................................................................... 68 
Functional Exclusives and Shared Resources ......................................................................................................... 69 
1. DisplayPort (DP1) Sharing................................................................................................................................... 69 
2. USB3.0 (Port 2) Sharing ...................................................................................................................................... 70 
3. USB2.0 (Port 1B) Sharing.................................................................................................................................... 71 
4. Audio (Line Out) J37 Shared Sources ................................................................................................................. 71 
5. Audio (Internal Pin-header) J36 Shared Sources................................................................................................. 72 
6. I2S0 Interface Sharing......................................................................................................................................... 73 
7. SATA Interface Sharing ....................................................................................................................................... 73 
8. Power Supply to V-By-One Display (V-TCON) .................................................................................................... 74 
9. I2C Devices.......................................................................................................................................................... 74 
10. I2C Bus Topology ................................................................................................................................................ 75 
Mechanical Design and EMI/ESD Shielding............................................................................................................. 76 
1. PCB Size.............................................................................................................................................................. 76 
2. Maximum component height................................................................................................................................ 76 
3. Mounting Holes.................................................................................................................................................... 76 
4. Mounting Concept................................................................................................................................................ 77 
5. EMI and ESD-Shielding ....................................................................................................................................... 77 
6. Mounting Holes - Mechanical Positions ............................................................................................................... 78 
All dimensions given are in millimeters [mm].................................................................................................................. 78 
 
 

6 12048231 Rev. 00 (Draft)

DATA MODUL AG | www.data-modul.com

1. Preface

1.1.Using this Document

In this Document, the eDM-CB-SM-IPCS is also referred to as „CB“.

Please read this Document before using this Carrier Board (CB).

This Document contains information about the hardware, software and configuration of the eDM-CB-SM-IPCS.

Awareness of the safety instructions and instructions for use in this Document will ensure the safe and correct use of the

eDM-CB-SM-IPCS.

In addition to the information given here, you should comply with the local regulations for the prevention of accidents and

generally applicable safety regulations.

1.2.Purpose of this Document

The purpose of this document is the definition of the technical parameters, the electrical connections and the mechanical

dimensions of the eDM-CB-SM-IPCS.

1.3.Danger Symbols & Levels

In this Document, symbols are used to highlight important safety instructions and any advice relating to the board. The

instructions should be followed very carefully to avoid any risk of accident, personal injury or property damage.

Danger Symbols

Dangerous Voltage, danger of electric shock

Hazard point

All DATA MODUL AG products are electrostatic sensitive

devices and are packaged accordingly. Do not open or handle

a DATA MODUL AG product except at an electrostatic-free

workstation. Additionally, do not ship or store DATA MODUL

AG products near strong electrostatic, electromagnetic,

magnetic, or radioactive fields unless the device is contained

within its original manufacturer's packaging. Be aware that

failure to comply with these guidelines will void the DATA

MODUL AG Limited Warranty.

Danger Levels

DANGER

Indicates a hazardous situation, which will result in death or

serious injury.

WARNING

Indicates a hazardous situation, which could result in death or

serious injury.

CAUTION

Indicates a hazardous situation, which may result in minor or

moderate injury.

NOTICE

Indicates a property damage.

General Symbols

Additional support or useful information.

The crossed-out refuse bin indicates that the products have to

be properly recycled or disposed of in accordance with national

legislation in the respective EU countries.

If you wish to dispose of usedelectrical and electronic products

outside the European Union, please contact your local

authority so as to comply with the local regulations.

12048321 Rev. 01 (Draft) 7

DATA MODUL AG | www.data-modul.com

1.4.Technical Support

DATA MODUL's technicians and engineers are committed to provide the best possible technical support for our customers

to enable an easy use and implementation of our products. We recommend to visit our website at www.data-modul.com first

for the latest documentation, utilities and drivers, which have been made available to assist you. If you need further assistance

after visiting our website please contact our technical support department by email at [email protected].

1.5.List of Abbreviations

Abbreviation

Description

BOM

CMOS

CSI

DFP

DMIS

DSI

EMI

FFC

FHD

GBE

GND

GPIO

HDA

HDMI

I2C

I2S-Audio

JTAG

LCD

LVDS

PCB

PCIe

PMC

PWM

RefDes

RTC

SATA

SMBus

SPI

TBD

TMDS

TTL

UART

USB

Vx1

Bill of Materials

Carrier Board

Complementary MOS

MIPI-Camera Serial Interface

Downstream Facing Port (USB Type-C)

Data Modul Inhouse Stanard

DisplayPort or Differential Pair in relation to Pin Type

MIPI-Display Serial Interface

Electro Magnetic Interference

European Norm

Flat Foil Cable

Full-HD Graphics Resolution

Gigabit Ethernet

Ground

General purpose Input/Output

High Definition Audio Interface

High Definition Multimedia Interface

Inter-Integrated Circuit Bus

I2S Audio Interface

Joint Test Action Group

Liquid Crystal Display

Low-Voltage Differential Signaling

Not Available

Not Connected

Printed Circuit Board

PCI Express

Management Controller

Pulse Width Modulation

Reference Designator

Real Time Clock

Serial ATA

System Management Bus

Serial Peripheral Interface

To Be Defined

Transition-Minimized Differential Signaling.

Transistor-Transistor Logic

Universal Asynchronous Receiver/Transmitter

Universal Serial Bus

V-By-One Display Interface

8 12048231 Rev. 00 (Draft)

DATA MODUL AG | www.data-modul.com

1.6.General Connector Signal Description

Type

Description

Bi-directional

Input

Output

GND

Ground connection

Power

Power connection

Not connected

Analog

Analog signal

Differential pair

1.7.Industry Specifications

Specification

Link

SMARC Hardware Specification 2.1.1

Extended Display Identification Data Standard EDID™

Enhanced Display Data Channel Specification DDC

Universal Serial Bus (USB) Specification

Serial ATA Specification

High Definition Audio Specification

IEEE standard 802.3ab 1000BASE-T Ethernet

http://sget.org

http://www.vesa.org

http://www.usb.org/home

http://www.serialata.org

http://www.intel.com

http://www.ieee.org

2. Standards & Certifications

2.1.SMARC Standard

eDM-CB-SM-IPCS is compliant to SMARC 2.0 and SMARC 2.1.1 specification.

2.2.Material Compliance

The PCB is produced under lead free soldering conditions.

All components are produced according to European RoHS (RoHS-1 = 2002/95/EU, RoHS-2 = 2011/65/EU) and REACH

(2006/1907/EU) regulations.

2.3.EMC Standards

Design to meet EN 55032-B within enclosure

EN61000-4-2 contact discharge 4kV

EN61000-4-2 air discharge 8kV

2.4.Safety

Designed to meet EN60950, EN62638 and UL60950.

2.5.Shock & Vibration

Designed to meet IEC/EN60068 and IEC/EN60068-2-27

2.6.Environmental Conditions

The eDM-CB-SM-IPCS is able to be operated and stored under the following environmental conditions:

Temperature (operating): 0°C … +60°C (commercial grade)

Temperature (storage): -15°C … +60°C

Relative humidity: < 90%

12048321 Rev. 01 (Draft) 9

DATA MODUL AG | www.data-modul.com

2.7.Functional Block Diagram

Figure 1 Functional Block Diagram

10 12048231 Rev. 00 (Draft)

DATA MODUL AG | www.data-modul.com

2.8.Ordering Information

Model Name

Part No.

Description

eDM-CB-SM-IPCS

12048231

SMARC 2.1.1 Carrier Board with full sampled parts according to the Data

Modul HW Specification for this product.

2.9.Connector Positions

Figure 2 Connector Positions

Tabla de contenidos

Otros manuales de Hardware de computadora de Data Modul

Data Modul

Data Modul eDM-COMB-CR6 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario

Data Modul eDM-CB-SM-IPCS Manual de usuario

Manuales populares de Hardware de computadora de otras marcas