Dash DSIM100 Manual de usuario
# DSIM100
SHAVED ice maker
Instruction Manual |Recipe Guide
r
e
c
i
p
e
s
i
n
s
i
d
e
!
∙ 3 ∙
Important Safeguards....................................................................4-7
Parts & Features................................................................................. 8
Setting Up Your Dash Shaved Ice Maker ..................................... 10
Using Your Dash Shaved Ice Maker.............................................. 11
Parts & Features ......................................................................... 12-13
Disassembly & Assembly ......................................................... 14-15
Cleaning & Maintenance ............................................................... 16
Recipes....................................................................................... 19-25
Customer Support .......................................................................... 26
Warranty........................................................................................... 27
SHAVED ICE maker
t
h
e
d
a
s
h
t
e
a
m
!
∙ 4 ∙
important safeguards
• Read all instructions
• When using electrical appliances, basic safety
precautions should be followed including:
• Read all instructions.
• Remove all bags and packaging from appliance
before use.
• Never leave appliance unattended when in use.
• Make sure the appliance is cleaned thoroughly
before using.
• Do not use appliance for other than its intended
use. For household use only. Do not use outdoors.
• To prevent electric shock, do not submerge the
cord, plugs, motor unit, or any electrical parts in
water or other liquids.
• Do not operate the machine without ice. Do not use
the appliance to shave or crush substances other
than ice.
• Do not place your ngers in the appliance, as the
blades are sharp and may cause injury.
• Do not attempt to sharpen the blades.
• In order to prevent the Dash Shaved Ice Maker from
overheating, do not operate this appliance for more
than 2 minutes continuously. Allow the appliance to
rest in between uses.
• Do not operate this appliance with a damaged cord,
damaged plug, after the appliance malfunctions,
is dropped, or damaged in any manner. Return
appliance to the nearest authorized service facility
for examination, repair, or adjustment.
• For maintenance other than cleaning, please
contact StoreBound directly at 1-800-898-6970
from 9AM–9PM EST Monday-Friday or by email at
• Do not place appliance on or near a hot gas burner,
hot electric burner, or in a heated oven.
• Refrain from using attachments that are not
recommended by the appliance manufacturer, as
this may result in re, electric shock, or personal
injury.
• Do not let the cord touch hot surfaces, or hang over
the edges of tables or counters.
• This appliance can be used by persons with
reduced physical, sensory or mental capabilities or
lack of experience of knowledge, if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved.
• This appliance is not a toy. Do not let children use
this appliance. Close supervision is necessary when
any kitchen appliance is used by or near children.
• Always be sure to unplug the appliance from the
outlet prior to moving, cleaning, storage, and when
not in use.
• StoreBound shall not accept liability for damages
caused by improper use of the appliance.
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS: PLEASE READ AND
SAVE THIS INSTRUCTION AND CARE MANUAL.
When using electrical appliances, basic safety precautions should be followed, including:
∙ 5 ∙
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS: PLEASE READ AND
SAVE THIS INSTRUCTION AND CARE MANUAL.
• Improper use of the appliance can result in property
damage or even in personal injury.
• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug will t in a polarized outlet only
one way. If the plug does not completely t in the
outlet, reverse the plug. If it still does not t, contact
a qualied electrician. Do not attempt to modify the
plug in any way.
• A short power supply cord is to be provided to
reduce the risk resulting from becoming entangled
in or tripping over a longer cord. An extension
cord may be used if care is exercised in its use. If
an extension cord is used, the marked electrical
rating of the extension cord should be at least as
great as the electrical rating of the appliance. The
extension cord should be arranged so that it will
not drape over the countertop or tabletop where
it can be pulled on by children or tripped over
unintentionally.
∙ 8 ∙
PA R TS &FEATURES
Clear Lid
Dial
Gear Hoop
Interior Bowl
Ice Guard
goes here
Exterior Bowl
Base
∙ 9 ∙
parts & features ∙ 9
PARTS & FEATURES
∙ 10 ∙
SETTING UP YOUR DASh shaved ice maker
Place the Base on a stable and dry surface.
Install the Motor Unit on the Base.
Align and insert the Exterior Bowl onto the assembled Motor
Unit and Base. The two notches on the side of the Exterior Bowl
should fit into the two notches on the inside of the Motor Unit.
Lastly, plug in the Power Cord.
1
2
3
NOTE:
Please clean your Dash Shaved Ice Maker before rst using. Refer to pages 10-14 for instructions
and details.
∙ 11 ∙
USING YOUR DASh shaved ice maker
Place ice cubes inside the Interior Bowl. The bowl should be filled
to the top level. If the ice has been in the freezer for a long time,
it may be too hard and may need to rest at room temperature for
a few minutes before shaving. The machine will then produce a
fluffier snow.
Place the Clear Lid on top of the Interior Bowl, locking it into
place by aligning the fin-shaped notch on the lid with the
corresponding notch on the Motor Unit.
To activate the machine, turn the lid counter clockwise until the
fin-shaped notch activates the Safety Switch. To stop the shaving
process, turn the lid clockwise to deactivate the Safety Switch. For
optimal results, hold onto the lid during the shaving process to
ensure all ice is shaved.
Unplug the Dash Shaved Ice Maker after each use.
1
2
4
Place an empty bowl on the base of the unit. This bowl will be
used to collect the shaved ice.
NOTE: At this time you may want to insert the Ice Guard, which
helps the ice shavings go more directly into the bowl. Simply slide
the Ice Guard into place so that the notches on the Ice Guard and
the Exterior Bowl align. (See red arrows on the left for reference)
3
PA R TS &FEATURES
Drive Gear Safety Switch Motor Unit
Base
∙ 12 ∙
PA R TS &FEATURES
Gear Hoop
Ice Guard
Dial Shaving Blade
Interior Bowl
Exterior BowlClear Lid
∙ 13 ∙
Otros manuales para DSIM100
2
Tabla de contenidos
Otros manuales de Máquina de hielo de Dash
