Dante DLS1798LA3P9S Manual de usuario

DLS1798LP

Thermal PTZ Camera

Installation and Operations Manual

Model Number: DLS1798LA3P9S - N SC

DLS1798LB3P9S - PAL

Description: hermal and 36x CCD P Z Camera

DLS1798LA-B3P9S

Intelligent PTZ Thermal Imaging System

User Operation Manual

Thank you for using our company’s product. Please read this operation manual

carefully before using it, as it may provide User with correct technical

information on how to properly do the installation.

Please contact us if User comes across problems that are not mentioned in this

instruction. We will supply User with additional technical support.

Warning: Remind user of potential danger!

1. Please read this instruction carefully before installing this device.

2. Please follow the warnings on the device and the instruction.

3. During the process of transporting and use, please avoid strong vibration in

order to protect the optic and electronic components.

4. Please use the power supply specified instruction on how to connect the

wires.

5. Do not open the device by yourself, or else it may cause electric shock or

machine damage. If there are problems, please contact factory and remember

not to try and repair it without instructions from Dante.

6. In order to protect the device and people, this device need to be installed on

firm, flat area.

7. Please install appropriate surge protection equipment to avoid damage from

power surge or lightning.

8. Use this device within the limitation of humidity and temperature.

9. To protect the imaging components from damage, please do not aim the

visible camera at sun and other objects of high bright intensity for a long time.

Attention

Don’t cover the sensitive components in front of lens in order to ensure the

device operates normally.

If the thermal camera is not operating as a result of power outage, please

restart unit.

Content

Part One Introduction .........................................................................................................1

1.Introduction...................................................................................................................1

2.Features........................................................................................................................1

3.Technical Indicators......................................................................................................2

Part Two Installation Instruction........................................................................................3

1.Installation Environment ...............................................................................................3

2.Shape and dimension...................................................................................................4

3.Installation step.............................................................................................................4

4.System connection reference.......................................................................................7

Part Three Operation Introduction......................................................................................8

1.Function Introduction....................................................................................................8

2.Menu Setup Instruction ................................................................................................9

3.Protocol and Address Setting .....................................................................................16

Part Four Quality guarantee and after-sales service............................................................19

1.Quality Guarantee and After-sales Service................................................................19

Appendix I: Common Problems Analysis...........................................................................19

Appendix II : RS 485 LINE ...............................................................................................20

Appendix III: Cable Spec List all countries ........................................................................22

Part One Introduction

1. Introduction

This thermal imaging camera combines thermal imager, visible camera and

pan-tilt. Unit has two video output and 360°horizontal pan rotation for high end

monitoring

2. Features

DLS1798 adopts thermal imaging technology and has a clear image, not

restricted by light

low light color to black and white camera for continuous monitoring day and

night

integrated pan-tilt, for multiple movement directions, no blind spot

monitoring and high accurate orientation

high intelligent, easy to operate and maintain

smart shell with professional design, light, firm, thermo stabilization,

anti-corrosion, waterproof and acid rain proof

low power consumption, low heat producing, stable performance

3.Technical Indicators

Effecting

Distance

Night vision 800m-2Km

Day vision 1000m

Camera

Sensor 1/4″Exview HAD CCD

Valid pixel 440,000

TV Line 550TVL（color）；570TVL（black & white）

Focal length 3.4～122.4 mm，36x optical zoom

Iris F1.6～F4.5

FOV 57.8°(wide)～1.7°(telephoto)

Focus Auto/Manual/Zoom trigger

Lowest illumination 0.2Lux/F1.49( color); 0.001Lux/F1.4( black & white )

White balance Auto，ATW，Indoor，Outdoor，One-push，Manual

Signal-to- noise ≥50db

Thermal

imager

Sensor Uncooled infrared focal plane detector（vox）

Valid pixel 320x 240(NTSC); 320×256 (PAL)

Wave length 8～14µm

NETD ≤[email protected],300K

Focal length 50mm

FOV 13.9°×11.1°

Spatial resolution 0.76mrad

Lens control Electronic focus

Image process 2X electronic zoom, palette colors

Pan-tilt

Pan speed 0°～50°/s

Tilt speed 0°～50°/s

Presets 128 at most

Cruise function 6 cruise paths, 20 presets for each path

Self-checking 40s

Interface

Power supply

interface

Terminal Block

Other interface RS422, 2×BNC video output, 2 alarm input, 1 alarm

output

Environmen

t indicators

Working

temperature -25

℃

～+55

℃

Storage

temperature -40

℃

～+65

℃

International

protection IP66

Anti-impact 15m/s

, 5~200Hz

Anti-vibration 150m/s

, 11ms

Salt-fog proof continuously spray fog for 48 hours under PH6.5-7.2

Power

supply

Power 24VAC

Power consumption ≤30W

Physical

indicators

weight 7.5kg

dimension 374mm×218mm×243mm(L×W×H)

Installation Outdoor base install

Part Two Installation Instruction

1.Installation Environment

Before installation, please check if the environmental temperature, humidity,

cleanliness, radio frequency, surge protection; be sure it meets the requirements,

check if the power supply is safe.

(1) Anti-static

Keep suitable temperature and humidity conditions

(2) radio frequency

Keep the night vision camera far away from the radio transmitters, radar

transmitters and other high-frequency devices

Adopts electromagnetic shield when necessary

(3) Surge Protection

The lines’ lightning-proof design must be considered integrated with the

building lighting-proof requirements, and must comply with the national

standards and industry standards.

The ground system must meet the both radio frequency and electrical safety

requirements, and must not short connect or mixed connect to the electrical

network zero curve.

When the system connect GND separately, the grounding resistance must

be less than 4Ω, grounding conductor cross-sectional area must be more

than 25mm²Water-proof

External lines must be connected to the aviation plug firmly to proof water in,

or the camera will be damaged.

(4) Weight Support

The night vision camera needs to use pole or bracket to support its weight, so

User must make sure the pole or arm may withstand the weight more than 20kg.

2.Shape and dimension

Night vision camera’s shape and dimension (mm)

3.Installation step

a．Remove the thermal camera’s bottom plate

b．Adjust the dip switch (according to the address set up instruction) to set up

the address (connect the camera to the resistor)

c．Re-install the bottom plate; please maintain the unit airproof and waterproof

d．Using four pieces M3X8 screw to fix the shield to camera, then using four

pieces M8X25 screw and four pieces M8 nut to fix the whole device to the

bracket

Fixing Layout

After installation, please connect the aviation plug pinout according to the

definition below, then connect to the device. Definition as follows:

Power supply, control signal input, video signal output all connect with one cable

with 12 PINS. See below:

twelve-hole aviation outlet pin definition:

No. Definition Remark

1 Video 1+ Video 1 Output +

2 Video 1- Video 1 Output -

3 24VAC: black (thick) 24VAC power input

5 RS422Y: red (thin) 422 control Y

6 RS422B-: yellow 422 control B

7 24VAC: red (thick) 24VAC power input

9 RS422Z: black (thin) 422 control Z

10 RS422A: orange 422 control A

11 Video 2+ Video 2 Output +

12 Video 2- Video 2 Output -

Night vision camera’s alarm input and output uses compound cable with 7-core

aviation connector, see below:

7-core aviation pin connector definition:

PIN NO. Definition Remark

1 ALARM_OUT: gray Alarm output

2 ALARM_OUT: yellow Alarm output

4 ALARM_IN1:blue Alarm input 1

5 ALARM_IN2:white Alarm input 2

6 ALARM_COM:black Alarm input ground

Note:

1.Please go ahead with the bolts M6×45 and M6 nuts which are equipped with

the camera. If need to change bolts because of bolts length, do make sure

diameter is correct

2.Avoid shaking and extrusion during fixing for protecting key components and

optics inside. Signal transmission line should be kept 50m away from high

voltage devices and cables.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Dante

Dante

Dante DNZ1880YM2 Instrucciones de montaje

Dante

Dante DLF1328A Manual de usuario

Dante

Dante DLM1762 Manual de usuario

Dante

Dante DLF1330A Manual de usuario

Dante

Dante DLF1325B Manual de usuario

Dante

Dante DLM1772(Y) Manual de usuario

Dante

Dante DLC1981 Manual de usuario

Dante

Dante DLI1971 Manual de usuario

Dante

Dante DLV1329A21V Manual de usuario

Dante

Dante DNA1990 Manual de usuario

Dante

Dante DNA1982 Manual de usuario

Dante

Dante DLV1331WA35-21V Manual de usuario

Dante

Dante DN1126 Manual de usuario

Dante

Dante DLF1330V Manual de usuario

Dante

Dante DNA1991YM Manual de usuario

Dante

Dante DNA1355V Manual de usuario

Dante

Dante DN1125A4 Manual de usuario

Dante

Dante DLF1129P Manual de usuario

Dante

Dante DLM1771 Manual de usuario

Dante

Dante DLM1971 Manual de usuario

Dante

Dante DLV1420W Manual de usuario

Dante

Dante DLI1972 Manual de usuario

Dante

Dante DLF1323AP Manual de usuario

Dante

Dante DLS1798LA3Q9 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario