Danish Interpretation Systems DCS 6000 Manual de usuario

DCS 6000

User Manual

Danish Interpretation Systems DIS

Digital Conference System

IS 6132P

Interpreter Set

Danish Interpretation Systems User Manual

No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the

publisher.

Danish Interpretation Systems User Manual

No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the

publisher.

List of Contents

List of Contents .....................................................3

Document version..............................................3

Important...............................................................4

Compliancy ........................................................4

Installation precautions.....................................4

Cleaning..............................................................4

Repacking...........................................................4

Warranty............................................................4

Description of the DCS 6000 system....................5

Features..............................................................5

System components ...........................................6

Central equipment etc......................................6

Interpreter equipment.......................................6

Conference equipment and channel selectors..6

Operating instructions..........................................7

IS 6132 P Interpreter Set.................................. 7

General description.......................................... 7

Features ........................................................... 7

User Controls, indications & connectors......... 7

Set up for each interpreters set ........................ 9

Normal operation........................................... 11

System Setup.......................................................14

Typical schematics ..........................................14

Appendix.............................................................. 15

Language list.................................................... 15

Technical appendix.........................................16

Cabling .......................................................... 16

Accessories (not supplied)............................. 16

Technical specifications ................................ 17

Document version

Printed: 12-10-2004 Version: K

Name: IS6132-REV-K.DOC

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

Important

Compliancy

The equipment has been tested and found to comply

with the limits of the following standards for digital

devices:

•EN55103-1 (Emission)

•EN55103-2 (Immunity)

•FCC rules part 15, class A (Emission)

This device complies with part 15 of the FCC rules.

Operation is subject to the following conditions: (1)

This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial or light

industrial environment. The equipment generates,

uses, and can radiate radio frequency energy and if

not installed and used in accordance with the user

manual it may cause harmful interference to radio

communications.

You are cautioned that any changes or

modifications not expressly approved in this manual

could void your authority to operate this equipment.

Installation precautions

Do not install the unit in a location near heat

sources such as radiators or air ducts, or in a place

exposed to direct sunlight, excessive dust or

humidity, mechanical vibration or shock.

To avoid moisture condensations do not install the

unit where the temperature may rise rapidly.

Cleaning

To keep the cabinet in its original condition,

periodically clean it with a soft cloth. Stubborn

stains may be removed with a cloth lightly

dampened with a mild detergent solution. Never use

organic solvents such as thinners or abrasive

cleaners since these will damage the cabinet.

Repacking

Save the original shipping cardboard box and

packing material; they will become handy if you

ever have to ship the unit. For maximum protection,

re-pack the unit as originally packed from the

factory.

Warranty

The individual units in the DCS 6000 system are

minimum covered by 12 months warranty against

defects in materials or workmanship.

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN 5

Description of the DCS 6000 system

Features

The DCS 6000 system has the following main

features:

•Fully digital

•Excellent sound quality

•“State of the Art” fully digital integrated

interpretation, discussion and voting system

offering interpretation, language distribution,

conference microphone and voting facilities

with attendance check with Chip Card ™.

•New, unique digital DATA and AUDIO bus.

•39 incoming channels (8 floor channels + 31

interpreted channels) and one Line input.

•33 distributed channels (2 x floor + 31

interpreted channels)

•The Delegate and Interpreter units are powered

and controlled by the CU 6010 Central Unit,

which drives up to app. 200 units on 4 chains.

•EX 6010 Extension Units or PS 6000 Power

Supplies available if more units are required

•A total of 4000 units (delegate and/or

interpreter units) can be connected to the

system.

•Using screened CAT5 or CAT5e cabling (FTP

or STP) ensuring a very cost effective

installation and easy set-up of portable systems

•Firmware in Delegate units, Interpreter Units,

Central Units etc. upgradeable through serial

PC-connection (RS232 or RS422)

•Can be operated with or without a PC.

•Added functionality and comprehensive

features provided by SW 6000 software

package running on PC

RS232/RS422 connection on CU 6010 for

external operation of the system of a PC or

control system such as AMX or Crestron

The SW 6000 is an optional software package,

which expands the functionality of the DCS 6000

system. The software runs on standard computer

technology (Standard PC with Windows 2000 or

XP).

Main features of the SW 6000 are:

•Microphone management

•Mimic panel operation

•Interpretation management

•Voting management

•Message handling

•Agenda handling

•Data stored on SQL data base for easy

export/import of data as well as easy links to

external databases

•Multi language user interfaces

•Supports different User types with different

priorities, user interfaces and control

possibilities

•Variety of printing facilities such as speaker’s

log, voting results, delegates list etc.

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

System components

The CU 6010 Central Unit supports all available

units in the DCS 6000 series:

Central equipment etc.

EX 6010 Extension Unit

PS 6000 Power Supply

AO 6008 Audio Output box

RP 6004 Repeater for four chains

JB 6002 Junction Box with 2 outputs

JB 6004 Junction Box with 4 outputs

Interpreter equipment

IS 6032P Interpreter Set

IS 6132P Interpreter Set

LS 6032P Interpreter Loudspeaker

Conference equipment and channel

selectors

CS 6032FV/H Channel Selector (flush mounted)

CM/DM 6010P Conference Unit (portable)

CM/DM 6020P Conference Unit (portable) with

XLR microphone connector

CM/DM 6070P Conference Unit (portable) with

two built-in channel selectors

CM/DM 6090P Conference Unit (portable) with

two built-in channel selectors and

XLR microphone connector

CM/DM 6060F Conference Unit (flush mounted)

with one built-in channel

selectors

CM/DM 6510F Conference Unit (flush mounted)

with Chip-card and 3 voting

buttons

CM/DM 6560F Conference Unit (flush mounted)

with one built-in channel

selector, Chip-card and 3 voting

buttons

MU 6040C/D Microphone Unit for use with

customised front plate with

Loudspeaker, Microphone and

Buttons. Available in Delegate

(D) and Chairman (C) version

AM 6040 Ambient Noise Microphone

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN 7

Operating instructions

IS 6132 P Interpreter Set

General description

The IS 6132 Interpreter Set is designed for use for

one interpreter, It is a compact unit for table top

use. The design of the units is easy understandable

with a “listening part” at the left side of the unit and

a “speaking part” at the right side of the unit.

Features

The main features of the IS 6132 Interpreter Unit

are:

•4 pre-select listening channels

•Large LCD display with back light

possibility

•Clear LED indication in buttons

•For use with either headset or gooseneck

microphone

User Controls, indications & connectors

Front plate layout

Incoming

- VOLUME +

- BASS +

- TREBLE +

Relay-select

Outgoing

Mute

Floor Microphone

B-select

IS 6132 Interpreter Set

Call

too fast

Engaged

Danish Interpretation Systems Speaking

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

Front plate controls

qIncoming Section

•Volume

This control adjusts the listening level in the

connected headphone

•Bass

This control adjust the Bass level in the connected

headphone

•Treble

This control adjust the Treble level in the connected

headphone

•a-b-c-d

These button selects between four pre-selection of

relay channels

•Relay-select

These buttons are used for each of the four pre-

selection to scroll through the available languages

•Floor

This button selects the floor language as the

listening language

qOutgoing Section

•Microphone

This button switches on the microphone. When

switched ON, the button and the light ring on the

gooseneck microphone will light red.

•Mute

This button is used to temporarily switching off the

microphone (when coughing etc). The channel is

still “occupied” when pressing the button, but the

microphone is disconnected as long as the button is

depressed. Mute is indicated by switching off the

light in the light ring of the microphone.

•A

Press this button to select the A-language as the

outgoing channel. A Red LED is indicating, that A-

language is selected. The Yellow engaged LED is

indicating, that the A-channel is occupied i.e. a

microphone on an interpreter set is switched on at

this channel

•B

Press this button to select the B-language as the

outgoing channel. A Red LED is indicating, that B-

language is selected The Yellow engaged LED is

indicating, that the B-channel is occupied i.e. a

microphone on an interpreter set is switched on at

this channel.

•B-Select

After pressing the B-button, the B-language can be

selected (if ALL is chosen at the B-mode selection

in the B-language set-up menu.

•Speaking too fast

Pressing this button sends a signal to the Chairman,

that the Speaker has to slow down his speech.

•Call

Not implemented

qConnectors

•XLR connector

The XLR-connector on the front is used for

connecting a microphone to the unit. Please note

that only DIS series GM40xx and GM44xx can be

used.

•Headphone connector

On each side of the interpreter set a mini jack is

located for connecting a headphone for listening to

the Floor language or one of the pre-selected relay

languages (a-b-c-d). On the left side a standard jack

connector is also located with the same

functionality.

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN 9

•Headset Connector

On the left side, a DIN connector is located for

connecting a DIS headset instead of a microphone.

•“Display” power connector

The unit supports a dimmed backlight (on/off user

selectable) in the LCD display with no external

power supply connected. However special

circumstances can required full light in the display.

At the bottom a power connector is used for

connecting a optional Power Adapter used for

supplying power for full light in the display. Please

note, that the interpreter set is functioning perfectly

also without light in the display.

Please observe that only the Power adapter supplied

with the interpreter set can be used. Other Power

adapters might damage the interpreter set.

•Loudspeaker Connector

A D-Sub 9 pole connector for connecting the

LS6032 Loudspeaker unit is located at the bottom

of the unit. The LS6032 Loudspeaker has a separate

Volume control. The loudspeaker will be

disconnected automatically if a microphone is

switched on at one of the interpreter sets in the

same booth (same A-language). This connector is

only on some versions of the Interpreter Set.

•DCS LAN connector

Two RJ45 sockets are located at the bottom of the

unit for connecting to the previous unit (an

Interpreter set or CU 6010 or an other DCS 6000

unit) and to the next unit.

Set up for each interpreters set

When an IS 6132 interpreter unit is connected to the

CU 6010, the following start-up screen is shown

The 9 digit number at the bottom of the display is

the units serial number. Each of the three positions

separated by dots can hold a value of 0-255 giving a

maximum serial number of 255.255.255.

After some seconds the following type of screen is

shown:

This screen will be different on the various

Interpreter sets, depending on the individual set-up

of the Interpreter Set. If the welcoming screen does

not disappear, the interpreter set has not been set-

up. For setting up the interpreter set, please see next

section.

A black dot in the middle of the first line indicates

that the Audio out from the interpreter unit is

muted. The reason for this is communication

problems. Cables etc. have to be checked.

Setup menu

Before using an Interpreter Set, a set-up of the A-

language and B-language has to be done on all

other interpreters’ sets.

When b and B are depressed simultaneously the set-

up menu is shown:

When the unit is un-configured (has not yet

received an address) the first two menus will not be

available. This is indicated by the missing “-“

-A-language/desk no. ?

-B-language/B-mode

-Ver. and serial no.

Communication sta

tus

A-language/desk no. ?

B-language/B-mode

-Ver. and serial no.

Communication status

DANISH INTERPRETATION

SYSTEMS

IS6132

055.004.255

11 SWE FLOOR 2

1 ITA FLOOR ENGLISH

3 FR FLOOR 11

4 DAN FLOOR SWEDISH

11 SWE FLOOR ¦2

1 ITA FLOOR ENGLISH

3 FR FLOOR 11

4 DAN FLOOR SWEDISH

Danish Interpretation Systems User Manual

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

If the B-select buttons is pressed the last two menu

items are shown:

A menu is selected by pressing the button to the left

of the menu (a-d). Then the display shows the next

level of menus or selections.

“A” language selection

Pressing the (d) button selects the A-language set-

up menu:

Press c-button for selecting the A-language for the

Interpreter Set. A black dot is indicating the

selection. Then use Relay-select up/down to scroll

through the available languages. The Desk number

will automatically change to the next available desk

for the selected language. To save the selection,

press OK (B-button).

If the desk number is set to an already occupied

desk number the set will take over the configuration

from the set on that desk and the other set will be

loose the configuration.

“B” language selection

When B-language is selected by pressing the c-

button, the following menu will appear.

Press button (c) for selecting the B-language for the

Interpreter Set. A black dot is indicating the

selection. Use Relay-select up/down to scroll

through the available languages.

Press button (a) for selecting the B-mode for the

Interpreter Set. The B-mode selection has the

following choices:

All The interpreter can select any B-language

himself.

One Only the B-language chosen at the B-

language selection can be used during operation.

None During operation no B-language can be

used (the B-button has no function except for b-B).

To save the selection, press OK (B-button).

Ver. and serial no.

This is an information menu showing the version,

software serial number and the address assigned to

the unit by the CU 6010 Central Unit.

Press OK to return to the Set-up menu

Communication status

This is an information menu showing the

communication status of the unit.

Press Reset to reset the number of Errors etc.

counted. After start up, some errors can be seen, but

if the numbers of errors are constantly increasing,

the cabling or a unit is defective. The fault could

also be a LAN connector, which is not properly

inserted. Please note the “click” from the lock,

when inserting the connector.

Press OK to return to the Set-up menu.

If the communication during start up is failing in a

way, that the Interpreter Unit will not work, this

screen will be shown instead of normal welcoming

screen.

-Backlight ?

-AB with mic on

A-language:

¦7 Norwegian OK

Desk number: Cancel

B-language:

¦7 Norwegian OK

B-mode: Cancel

One

IS6132 rev. D

SW ver.: 000.0043 OK

Serial #: 055.004.255

Address: 215

Rx Errors: 0

Tx Retries: 0 OK

Tx dropped: 0 Reset

Otros manuales para DCS 6000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de conferencias de Danish Interpretation Systems

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 600 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems UNCONVENTIONAL DC 5980 P Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Danish Interpretation Systems

Danish Interpretation Systems DCS 6000 Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario