Danfoss CLX Home Manual de usuario
Danfoss CLX Home
Installation Manual
MAKING MODERN LIVING POSSIBLE
SOLAR INVERTERS
Contents
1. Introduction 2
Safety Instructions 2
Product Overview 3
Scope of Delivery 4
2. Installation 5
Installing CLX Home 5
Mounting 5
Installing the Danfoss SolarApp 5
System Requirements 5
Installation on Smartphone or Tablet 5
Browser Plugin Installation 6
3. Configuration 8
First Use of the Danfoss SolarApp 8
Settings 8
Granting Remote Access 9
Delete Existing User from the Access Control List 10
Disable Remote Access 10
Navigating to Another CLX Monitored Plant 10
Plant Name 11
CO2 Emission 11
Revenue 11
Configuring Date and Time 11
Language 11
About 11
CLX Portal Upload 11
Firmware Update of the CLX Home Box 11
4. Application and Data 12
Main Page 12
Production Graphs 13
Logging Capacity 14
Logging Interval 14
Plant Status 14
Detailed Inverter Data 15
5. Technical Data 16
6. Troubleshooting and FAQ 17
Troubleshooting and FAQ 17
Contents
L00410618-03_02 1
1. Introduction
1.1. Safety Instructions
The reader must be familiar with the rules and regulations for electrical equipment and connec-
tion to the mains power network. Pay particular attention to general safety regulations for
working with electrical systems.
Observe the safety instructions below to prevent injury to persons and damage to connected
equipment.
Contact with electrically conductive parts after disconnection from the mains supply can be dan-
gerous. Do not connect the equipment to the mains supply before installation.
Equipment must be installed only in protected/dry environments.
Do not use metallic/pointed/sharp instruments to access the enclosure.
Prevent cables and terminals from being exposed.
The power plug must be accessible at all times.
Qualified personnel only must perform service.
Equipment must only be operated at the rated supply voltages. A suitable power
supply unit is included in the scope of delivery.
Note:
Observe the manufacturer's instructions regarding the handling of power supply units (espe-
cially switching units).
Observe the manufacturer's instructions regarding the handling of inverters.
1.2. Introduction
This document describes how to configure the CLX Home product for use with a Danfoss solar
inverter to enable monitoring of up to 3 DLX, ULX, TLX, TLX+, TLX Pro, TLX Pro+, FLX or FLX
Pro *) inverters from a Smartphone, tablet or PC-based browser.
*) TLX Pro, TLX Pro+ and FLX Pro variants only when the inverters are connected via RS-485 and not us-
ing the master/follower concept.
To install and configure the CLX Home box:
• Connect the CLX Home box to the inverter and the internet (safely behind a firewall,
without configuring the latter).
• Install the Danfoss SolarApp.
• Enter email address and follow the setup procedure described in the Danfoss SolarApp.
For details refer to Chapter 2. When these steps are completed, it is possible to start monitoring
the plant from anywhere in the world.
Note:
All values shown are based on inverter data and are not legally binding.
1. Introduction
2 L00410618-03_02
1
Note:
For the servicing of the CLX Home box, third-party persons can connect to the CLX Home
box and read the production data.
1.3. Product Overview
150AA020.10
12 3 4
Illustration 1.1: CLX Home Box - Connection Area
Legend
1 Power supply with circular connector (9 VDC)
2 Ethernet port for LAN
3 & 4 RS-485 for connection to the inverter network
1 2 3 4
150AA021.10
Illustration 1.2: CLX Home Box - LEDs
LEDs
LED 1 Green - power on
LED 2 Red - flashing red - ConnectSmart is operating correctly
LED 3 Yellow - CLX Home is operating correctly
LED 4 Green - CLX Home is connected to the solar inverter
1. Introduction
L00410618-03_02 3
1
1.4. Scope of Delivery
The following items are included in the delivery:
• CLX Home
• Installation Manual
• Power supply
• RJ-45 termination plugs for terminating the RS-485 inverter network
• Ethernet cable (standard network cable): RJ-45 cat 5e, for connecting the CLX Home
box to the internet router
1. Introduction
4 L00410618-03_02
1
2. Installation
2.1. Installing CLX Home
Perform the following steps to install the CLX Home box:
1. Connect the power supply to the box and the mains supply.
2. Connect the Ethernet cable to the CLX Home box and to an inverter/network router.
3. Plug the RJ-45 terminator into one of the two RJ-45 RS-485 sockets of the CLX Home
box.
4. Using an RJ-45 network cable (not included in the scope of delivery) (minimum cat 5e
STP network cable is required) connect the inverter to the free RJ-45 socket of the CLX
Home box.
5. If more than one inverter must be connected, connect the inverters in an RS-485 daisy
chain (depending on inverter type, refer to the corresponding inverter manual).
6. Terminate the inverter bus at the far end with the second RJ-45 terminator (included
in the scope of delivery), see the corresponding inverter manual for details. Different
inverter types are terminated differently.
Note:
For initial configuration, it is important that the PC, tablet or Smartphone (with the Danfoss
SolarApp installed) are connected to the same local network as the CLX Home. When the
CLX Home is configured using a Smartphone or a tablet, the internet router must support
WiFi.
2.1.1. Mounting
The CLX Home is intended for either wall mounting using two 3 mm screws (not included in the
scope of delivery), or it can be used as a table top unit.
2.2. Installing the Danfoss SolarApp
2.2.1. System Requirements
The Danfoss SolarApp can be used on Smartphone, tablet or via PC-based Internet browser.
Smartphone and tablet using the iOS (Apple) or the Android operating system are supported.
For the PC-based browser plugin, Firefox or Internet Explorer must be used.
Operating Systems Version
iOS Min. version 5.0+
Android Min. version 3.0+
Windows, Mac OS X and Linux Internet Explorer: Min. version 9
Firefox: Min. version 9
Table 2.1: System Requirements
2.2.2. Installation on Smartphone or Tablet
1. Download the Danfoss SolarApp from Google Play (formerly Android Market) or from
the AppStore.
2. Start the App.
2. Installation
L00410618-03_02 5
2
3. Either sign in with an existing account or create a new one:
3.1 Enter an e-mail address and a password.
3.2 Click on 'Create Account'.
3.3 A verification e-mail will come.
3.4 Click on the link in the verification e-mail.
4. Return to the Danfoss SolarApp and click on 'Sign In'. Sign in using the newly created
account.
Illustration 2.1: Login Screen - iPhone Example
Note:
Enable auto login to be automatically logged in every time the Danfoss SolarApp is started.
5. A redirection to the 'Discovery page' follows after signing in. For further details, see
the section
Configuration, First use of the
Danfoss
SolarApp
.
2.2.3. Browser Plugin Installation
1. Navigate to www.clx.danfoss.com to download the browser plugin, following the in-
structions.
2. Once the browser plugin has been installed and an account has been created, enter
the address of the PV plant: serialnumber.clx.danfoss.com in the address line of the
browser. The serial number is in a format, where the first 8 digits are the HW version
of the CLX Series and each CLX box has a different HW version:
-CLX Standard: 139F0196
-CLX Standard GM: 139F0194
-CLX Home GM: 139F0193
The remaining digits are visible on the label at the back of the CLX box, see the illus-
tration below:
2. Installation
6 L00410618-03_02
2
Illustration 2.2: Product Label
The product label example shows CLX Standard GM: the address to enter in the web
browser would be: 139F0194075201P222.clx.danfoss.com.
3. Follow the procedure and log in with an existing account or create a new one:
3.1 Enter an email address and a password.
3.2 Click on 'Create account'.
3.3 A verification email will come.
3.4 Click on the link in the verification email and sign in.
4. The main page of the Danfoss SolarApp opens. If not, see
Configuration, Trouble-
shooting
for help.
2. Installation
L00410618-03_02 7
2
3. Configuration
3.1. First Use of the Danfoss SolarApp
Note:
Ensure connection to the same local network as the CLX box, before continuing with the
configuration.
After installation and profile creation, the 'Discovery page' appears. The page can always be ac-
cessed via [Settings → Remote access → Scan for local devices]. All reachable CLX products are
listed here.
Illustration 3.1: Discovery Page
When connected to the same local network as the CLX product, the address of the CLX box is
now shown.
By clicking the address representing the accessible CLX box (red arrow in the illustration), the
main page of the current CLX box appears. At the same time, the CLX box is configured for re-
mote access by the current user. Other users may be added as described in the section
Set-
tings, Granting Remote Access
.
See Chapter 4,
Application and Data
, for a detailed description of the Danfoss SolarApp itself.
Note:
Set up the Danfoss SolarApp start page as home page or bookmark, for use on PC or via
Internet browser.
3.2. Settings
The settings menu link is located in the bottom right corner of the main page of the Danfoss
SolarApp (see illustration in the section
Main Page
). Via the settings menu the following config-
uration options are available:
• Remote Access:
-Grant remote access, see the address of the plant or set another plant as 'de-
fault'.
3. Configuration
8 L00410618-03_02
3
-Search for a local CLX box.
-Navigate to another CLX controlled PV plant.
-View history of previously accessed CLX controlled plants.
-Change the access control list.
-Show login screen.
• Configure plant name.
• Configure settings for Revenue and saved CO2.
• Change the 'date and time' configuration.
• Change the default language settings.
•Enable upload to the CLX Portal*).
• Firmware update of CLX Home.
*) Only used in CLX Home.
Each configuration option is described in detail below.
Illustration 3.2: Settings
3.2.1. Granting Remote Access
Remote access of the CLX Home product is controlled via an access control list. The user who
configured the CLX Home box for initial use is always added automatically to the remote access
list. As default, remote access is enabled.
To grant remote access to another user, proceed as follows:
1. Navigate to [Settings → Remote access].
2. Scroll down to the 'Access control' section.
3. Ensure that 'Remote access' is on.
4. Select 'Add user'. The 'Add user' screen opens.
5. Enter the email address of the user to whom access should be granted:
• Select 'Grant access and notify' when an email should be sent containing a
link to the plant, to inform this particular person.
3. Configuration
L00410618-03_02 9
3
Tabla de contenidos
Otros manuales de Inversor de Danfoss
Danfoss
Danfoss CLX Series Manual de usuario
Danfoss
Danfoss TripleLynx Manual de usuario
Danfoss
Danfoss DLX 3.8 Manual de usuario
Danfoss
Danfoss 4K Manual de usuario
Danfoss
Danfoss VLT 2010 Manual de usuario
Danfoss
Danfoss Holip HLP-C+ Series Manual de usuario
Danfoss
Danfoss Optyma Plus Manual de instrucciones
Danfoss
Danfoss EM-PMI375 Manual de usuario
Danfoss
Danfoss FLX 17 Pro Manual de usuario
Danfoss
Danfoss VACON NX FI6 Manual de usuario
Danfoss
Danfoss CLX Series Manual de usuario
Danfoss
Danfoss DLX 3.8 UL Manual de usuario
Danfoss
Danfoss VLT 2800 Series Manual de usuario
Danfoss
Danfoss VLT AutomationDrive FC 300 Manual de usuario
Danfoss
Danfoss VLT AutomationDrive FC 360 Manual de usuario
Danfoss
Danfoss VLT 2822 Manual de usuario
Danfoss
Danfoss Type 12 BD150 105N0912 Manual de usuario
Danfoss
Danfoss VACON NXP FI9 Manual de usuario
Danfoss
Danfoss EM-PME375 Series Manual de usuario
Danfoss
Danfoss VLT AutomationDrive FC 300 Guía
