Danfoss EKA 183A Manual de usuario

520H10102

Installation Guide

EKA 183A with Adaptor for ERC21x Controllers

Programming guide

DKRCC.EI.RL0.I2.02 / 520H10102 | 1© Danfoss | DCS (az) | 2015.05 Installation guide | EKA 183A

Components:

ERC 21x Controller EKA 183A Adaptor with cable assembly

Ordering Number: 080G9740

Pack Contents: EKA 183A, Adaptor with cable assembly

PC settings:

Refer to the specic documentation (DKRCC.PD.R1.06.02) for further details.

Instruction for connecting to controller:

Step 1 Step 2

Connect EKA 183A to Adaptor Connect Adaptor cable with the controller

2 |DKRCC.EI.RL0.I2.02 / 520H10102 © Danfoss | DCS (az) | 2015.05Installation guide | EKA 183A

Programming the controller:

EKA 183A is used to copy settings to an ERC21X controller.

It can also be used to copy settings from one ERC controller to another ERC controller of the same type, eg. the same

software version.

Programming steps:

EKA 183A is inserted into the controller.

The controller is connected to the electricity mains.

Steps Illustration Observations and actions

1- ashes

(checking) YELLOW

The LED will ash YELLOW when the programming is

inserted into the controller. Here it is checked whether the

data can be transferred

2 - light up constant

(await press) YELLOW

Shortly afterwards, the LED constant light up YELLOW and

the data transfer can start

3 - to write to the

controller or

to write to the

programming key

GREEN

RED

~ 1 sec

~ 4 sec

- Pressing the button on the top of EKA (1 sec) will transfer

data from the programming key to the controller

(GREEN LED ashes)

- Pressing the button on the top of EKA (4 sec) will transfer

data from the controller to the programming key

(RED LED ashes)

4 - light up constant

(transfer nished) CONSTANT

GREEN

The transfer has nished when the LED light up constant

green

Flashing red-green-red-green-red-green....... = fault.

If there is a fault indication, please check code no.,

SW version and Error code.

Refer to Technical brochure (DKRCC.PD.R1.06.02) for

more details

Note: refer to the speciﬁc documentation (DKRCC.PD.R1.06.02) for further details

Data Transfer:

Two methods (Mode A or Mode B) can be selected for transferring data. Modes may vary based on product and

connected device as in below table.

The default mode is set as ”Mode B”, which can be used for ERC 21X series only.Refer to specic documentation

(DKRCC.PD.R1.06.02) for step by step process to change the Mode for ERC 10X and ERC 11X Series.

Product Type Mode Setting for Programming Key

Plugged in Doking Station Connected to ERC product directly

ERC 10X Series Mode A Not applicable

ERC 11X Series Mode A Not applicable

ERC 21X Series Not applicable Mode B

Otros manuales de Controladores de Danfoss

Danfoss

Danfoss VLT AutomationDrive FC 302 Manual de usuario

Danfoss

Danfoss ADAP-KOOL AK-CC 750 Manual de usuario

Danfoss

Danfoss A376 Series Manual de instrucciones de instalación

Danfoss

Danfoss EKD 316C Colibri Manual de usuario

Danfoss

Danfoss AK-CC 550 Manual de usuario

Danfoss

Danfoss AK-PC 420 Manual de usuario

Danfoss

Danfoss AME 35 Manual de usuario

Danfoss

Danfoss AFT 06 Manual de usuario

Danfoss

Danfoss VLT Soft Starter MCD 600 Manual de usuario

Danfoss

Danfoss VLT DMS 300 Manual de usuario

Danfoss

Danfoss MCD3000 Series Manual de usuario

Danfoss

Danfoss MCO 305 Manual de usuario

Danfoss

Danfoss FC 300 Guía

Danfoss

Danfoss VLT 6000 series Manual de usuario

Danfoss

Danfoss AME 56K Manual de usuario

Danfoss

Danfoss Old ICAD 600 series Manual de usuario

Danfoss

Danfoss AME 438 SU Manual de usuario

Danfoss

Danfoss EKC 414A Manual de usuario

Danfoss

Danfoss ECL Comfort 300 Manual de usuario

Danfoss

Danfoss AMI 120 NL-1 Manual de usuario

Danfoss

Danfoss AME 130 Manual de usuario

Danfoss

Danfoss PVE 7 Series Manual de usuario

Danfoss

Danfoss Old ICAD 600 series Manual de usuario

Danfoss

Danfoss AK-CC55 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario