Dali SOUND HUB COMPACT Manual de usuario
DALI SOUND HUB COMPACT
MANUAL
2
Introduction
Thank you for choosing the DALI SOUND HUB COMPACT.
DALI is renowned throughout the world for continually
striving to enhance the experience of music while
simultaneously designing audio products that beer suit
our lives and homes. The DALI SOUND HUB COMPACT
wireless streaming preamplifier is the latest expression of
those twin aspirations.
The DALI SOUND HUB COMPACT is a technologically
advanced product that requires thoughtful installation. We
recommend therefore that you read this manual carefully,
and follow its advice, when installing your DALI SOUND HUB
COMPACT.
Following this introduction the manual covers unpacking,
installation, setup, connections and use, but begins with a
short overview of the DALI SOUND HUB COMPACT.
Contents
Introduction 2
1. SOUND HUB COMPACT Overview 3
2. Unpacking 6
3. Installation and Setup 7
3.1 Connecting Speakers 11
3.2 Connecting Sources 13
3.3 Finishing your SOUND HUB COMPACT installation 15
4. Using your SOUND HUB COMPACT 16
5. Maintaining your SOUND HUB COMPACT 17
6. Fault Indication 18
7. Technical specifications 19
3
1. SOUND HUB COMPACT Overview
The DALI SOUND HUB COMPACT is a control preamplifier
and source selection hub for DALI wireless speaker systems
such as the OBERONC, CALLISTO C and RUBICON C
series. The DALI SOUND HUB COMPACT accepts both
conventional wired audio sources and Bluetooth audio
streams and broadcasts them wirelessly to connected active
speakers. Source selection and volume control is provided by
an infrared remote control.
The SOUND HUB COMPACT incorporates four wired audio
inputs and can also connect wirelessly to Bluetooth audio
streaming devices. The wired inputs comprise a stereo
analogue input on phono sockets, two TOSLINK optical
digital inputs and an HDMI connection for audio from a TV via
ARC (Audio Return Channel). The Bluetooth wireless input
is compatible with the SBC, AAC, aptX and aptX HD audio
streaming formats.
The SOUND HUB COMPACT incorporates top panel
indicators that display volume level and source selection.
DIAGRAM 2
6
2. Unpacking
The contents of the DALI SOUND HUB COMPACT pack is
illustrated in Diagram 2 and listed below.
1: SOUND HUB COMPACT
2: IR (InfraRed) Control Signal Receiver
3: Power supply with international mains socket adaptors
4: IR remote control
5: Quick start Guide
Take care when unpacking your SOUND HUB COMPACT.
A transparent protection film is applied over the top
surface of the unit and the front panel. We recommend that
the protection film is le in place until your SOUND HUB
COMPACT is installed in its final location.
NOTE:
We suggest that you retain your SOUND HUB COMPACT
packaging for future use. However, if that is not possible,
please dispose of it responsibly.
DALI SOUND HUB COMPACT
x1
x1
x4
x1
x1
3. Installation and Setup
Your DALI SOUND HUB COMPACT can be located
predominantly as is convenient for you and your home,
although it should be within the same space as the speakers
it is to be connected to. We recommend the SOUND HUB
COMPACT is placed on a furniture unit or wall-mounted
using its underside keyhole slots. However, the only
constraints are accessibili to a mains power socket and to
the signal cables for any wired audio sources that are to be
connected.
If you wish to wall-mount your SOUND HUB COMPACT
using its keyhole slots you should be sure of the suitabili
of the wall, and of your abili to securely insert a screw. If
you are unsure, it is best to seek advice. The SOUND HUB
COMPACT is best mounted in landscape orientation with its
connection panel facing downwards.
SOUND HUB COMPACT wall hanging is illustrated in
Diagram 3. Use wall-mounting screws of 3 – 5mm (0.12
– 0.20inches) shank diameter and 10mm (0.4inches)
maximum head diameter. Leave 8 – 12mm (0.30 –
0.50inches) screw length protruding from the wall surface.
• Once the preferred SOUND HUB COMPACT location has
been established, insert two mounting screws in the wall
106mm (4.2inches) apart on the SOUND HUB COMPACT
horizontal centre line.
• Li the SOUND HUB COMPACT up on to the screws so
that their heads engage with the keyhole slots. This is best
done aer all the required cables are connected to the
SOUND HUB COMPACT. See the following section for
more on SOUND HUB COMPACT connections.
NOTE:
Your SOUND HUB COMPACT can be placed inside a closed
cupboard or otherwise concealed from line of sight to its
remote control. However, in these cases it will be necessary
to connect the supplied IR Signal Receiver and position its
head in an unconcealed location.
7
USB POWER/
SERVICE
POWER
9V 1.3A
AUTO
SOURCE
SELECT
OFF
ON
IRBAND
AUTO
5.8 GHz
SUB OUT
RESET
RCA IN
RL
OPTICAL IN
OPTICAL IN
DIAGRAM 5
9
3. Installation and Setup
Follow the steps below to install your SOUND HUB COMPACT.
• Install baeries in the SOUND HUB COMPACT remote control.
Diagram 4 illustrates baery installation.
• If required, plug the IR Control Signal Receiver into the IR socket
on the SOUND HUB COMPACT rear panel as illustrated
in Diagram 5 and position the Signal Receiver head in an
unconcealed location. The Signal Receiver head can be secured
in position using its self-adhesive backing.
• With the location of your SOUND HUB COMPACT selected,
plug the power supply cable into the rear panel POWER
socket illustrated in Diagram 5 and then plug the power supply
into an appropriate mains power socket. Your SOUND HUB
COMPACT will switch on immediately in standby mode with its
rear panel power indicator illuminating red.
NOTE:
Depending on your location it may be necessary to fit one of the
supplied mains socket adaptors to the power supply. The adaptor
will simply click into position.
DIAGRAM 4
3. Installation and Setup
• To switch the SOUND HUB COMPACT from
standby mode to operational mode, press the
remote control Standby buon, or any of the
source select buons. The LED indicators on the
SOUND HUB COMPACT top panel will illuminate
according to the volume level. When changing
source a single LED will illuminate according to
the chosen input. The top panel indicators are
illustrated in Diagram 6.
NOTE:
If your SOUND HUB COMPACT has been
previously used it may need to be reset. To reset
your SOUND HUB COMPACT use an appropriate
tool to press and hold the rear panel RESET
pinhole buon for 1second. The location of the
reset buon is illustrated in Diagram 7.
DIAGRAM 6
USB POWER/
SERVICE
POWER
9V 1.3A
AUTO
SOURCE
SELECT
OFF
ON
IRBAND
AUTO
5.8 GHz
SUB OUT
RESET
RCA IN
RL
OPTICAL IN
OPTICAL IN
DIAGRAM 7
Reset buon
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
Print color: MOTIP 51077
10
Tabla de contenidos
Otros manuales de Cambiar de Dali
