Dali KATCH G2 Manual de usuario
DALI KATCH G2
MANUAL
2
CONTENTS
1. Introduction ..............................3
2. Geing to know your KATCH G2...........4
3. Switch On and O .........................5
4. Volume Control ...........................6
5. Baery Charging..........................7
6. Bluetooth .................................8
7. True Wireless Stereo ....................11
8. Sound Modes ............................12
9. Wired Connections ......................13
10. Strap Extension..........................14
11. Factory Reset & Firmware Upgrade ......15
12. Cleaning .................................16
13. Disposal .................................16
14. Technical Specifications..................17
3
Model: KATCH G2
DALI KATCH G2
QUICK START GUIDE
SCAN THE CODE
FOR MORE INFO
3 sec
EQ-1
EQ-2
1. INTRODUCTION
Welcome to the DALI KATCH G2, and thank you for trusting DALI with your portable
music. The KATCH G2 takes the features and performance of the original DALI KATCH
and brings evolution to bear, with new colours, more baery life, enhanced Bluetooth
5.0 aptX HD wireless performance, and a True Wireless Stereo mode that enables two
KATCH G2 speakers to link and play stereo.
Some things have no need of change however and the DALI KATCH G2 borrows its
predecessor’s slish Danish design, vivid multi-driver sound, and exceptional build
quali. The newly evolved DALI KATCH G2 is the latest word in compact portable music.
Your DALI KATCH G2 packaging contains:
Universal Mains Charger (1.75 m cable length)
Quick Start Guide
Mains Charger Plugs
Travel Bag
5
3. SWITCH ON AND OFF
3.1 Switch ON
To switch ON your DALI KATCH G2:
1. Press and hold the Power On/O buon (Buon 2)
until the switch-on sound plays.
2. The indicator lights (Lights 3) will illuminate to show
that the KATCH G2 is ready for use.
When your DALI KATCH G2 is switched on, the
indicator lights (Lights 3) show the baery charge
state.
3.2 Switch OFF
To switch OFF your DALI KATCH G2:
1. Press and hold the Power On/O buon (Buon 2) until the
switch-o sound plays.
2. The indicator lights (Lights 3) will switch o unless the
KATCH G2 is connected to mains power via its charger (see
5.0).
If your DALI KATCH G2 remains unused for 20 minutes while
running on baery power it will switch o automatically.
2
Power On/
O
3
25% 50% 75% 100%
If your KATCH G2 does not switch on, connect it to
mains power via its charger (See 4.0).
6
4. VOLUME CONTROL
4.1 Volume Down
To reduce the volume of your DALI KATCH G2 press
the Volume Down buon (Buon 4).
To reduce the volume quickly, press and hold the
Volume Down buon (Buon 4).
4.2 Volume Up
To increase the volume of your DALI KATCH G2 press
the Volume Up buon (Buon 5).
To increase the volume quickly, press and hold the
Volume Up buon (Buon 5).
4.3 Volume Indications
The indicator lights (Lights 3) indicate the volume seing.
4
Volume
Down
5
Volume
Up
NOTE
When playing Bluetooth
audio, as well as
adjusting volume with
the KATCH G2 buons,
you can also use the
volume buons on your
Bluetooth device.
7
5. BATTERY CHARGING
To charge the DALI KATCH G2 internal baery, connect the
included mains charger to the KATCH G2 (Connector 9).
Charging will begin as soon the charger is connected to mains
power. The indicator lights (Lights 3) will pulse slowly while
charging is underway while simultaneously indicating charge
state. A full baery charge will take lile more than 2 hours.
Playing music or using the USB charge output (Connector 7)
will increase charge time.
NOTE
Powering the DALI
KATCH G2 through the
mains charger enables
it to play louder and
with more energy. This
is recommended for
optimal performance
when playing loud par
music.
The KATCH G2 has
class leading baery life
but it will vary depending
on use. Play your music
louder and the baery
will drain a lile faster.
With a fully charged baery your KATCH G2 can play
music for up to 30 hours.
8
6. BLUETOOTH
6.1 Pairing
To connect a Bluetooth audio device to your DALI KATCH G2:
1. Switch on the KATCH G2 (See 3.1). It will immediately
become visible for pairing.
2. Initiate Bluetooth pairing from your audio device seings
and select “DALI KATCH G2”.
3. When pairing is established, the KATCH G2 Bluetooth
pairing sound will play and the indicator lights (Lights 3) will
illuminate in blue.
3
Indicator
Lights
NOTE
The DALI KATCH G2
employs Bluetooth 5.0
for enhanced range and
connection stabili, and
implements the aptX HD
wireless audio codec for
optimum sound quali.
If a Bluetooth audio device has been previously paired
with your DALI KATCH G2 and is within range, the
KATCH G2 will automatically reconnect to that device.
It is possible for two devices to be paired with your
DALI KATCH G2 simultaneously, only one device at a
time however will be able to connect and play audio.
9
6. BLUETOOTH
6.2 NFC Pairing
DALI KATCH G2 Bluetooth pairing can also be
initiated using NFC:
1. Switch on the DALI KATCH G2 (See 3.1).
2. Ensure that NFC is enabled in your Bluetooth
audio device.
3. Locate the NFC sensing area of your Bluetooth
audio device.
4. Hold the NFC sensing area of the audio device
close to the side of your KATCH G2, adjacent
to the Power On/O buon (Buon 2), as
shown in the illustration.
NOTE
NFC is short for “Near-
field Communication”.
It employs the same
short range mobile
technology used for
mobile phone payments.
NFC Bluetooth pairing
is currently available
only with Android mobile
devices.
NFC
Power On/O 2
10
DALI KATCH G2 1 DALI KATCH G2 2 DALI KATCH G2 3DALI KATCH G2
6. BLUETOOTH
6.3 Bluetooth Release
If you are unable to pair a Bluetooth device
with your DALI KATCH G2 it is likely that two
devices are already paired. In this case:
1. Press and hold the KATCH G2 Bluetooth
release buon (Buon 1) until the
Bluetooth release sound plays and the
indicator lights flash blue.
2. All paired devices will now be released,
enabling two new devices to be paired.
6.4 Bluetooth Naming
If you have multiple DALI KATCH G2 speakers it is possible to change
their Bluetooth names so that you can keep track of which is which.
1. Switch o each DALI KATCH G2 (See 3.2).
2. Press and hold the Power On/O buon (Buon 2).
3. When the switch on sound plays, keep holding the Power On/O
buon (Buon 2), while simultaneously pressing either the Volume
Up (Buon 5) or Volume Down (Buon 4) to scroll through the
possible name options (DALI KATCH G2, DALI KATCH G2 1, DALI
KATCH G2 2 and DALI KATCH G2 3). The indicator light display for
each option is illustrated in the diagram.
Otros manuales para KATCH G2
1
Tabla de contenidos
Otros manuales de Oradores de Dali
Dali
Dali Helicon 400 LE Manual de usuario
Dali
Dali SUB E-9 F Manual de usuario
Dali
Dali OPTICON 6 MK2 Manual de usuario
Dali
Dali PHANTOM M-675 Manual de usuario
Dali
Dali 1001 Manual de usuario
Dali
Dali MS 4 Manual de usuario
Dali
Dali Royal Series Manual de usuario
Dali
Dali Euphonia IWS 3 Phantom Guía de referencia rápida
Dali
Dali KORE Manual de usuario
Dali
Dali Phantom Kompas Manual de usuario
Dali
Dali 3b Manual de usuario
Dali
Dali EUPHONIA MS 4 Manual de usuario
Dali
Dali Phrame Manual de usuario
Dali
Dali ZENSOR 1 Manual de usuario
Dali
Dali PHANTOM E-50 Manual de usuario
Dali
Dali Evidence C70 Manual de usuario
Dali
Dali Euphonia MS 4 Manual de usuario
Dali
Dali OBERON Series Manual de usuario
Dali
Dali PHANTOM VOKAL Manual de usuario
Dali
Dali MegaLine III Manual de usuario
