Dahua DH-SD6323E-H Manual de usuario

Intelligent Speed Dome Installation Manual

Version 3.1.0

Table of Contents

1INTELLIGENT SPEED DOME INSTALLATION..................................................1

1.1 Installation Preparation .........................................................................................................................1

1.2 Initial Setup.............................................................................................................................................2

1.3 Dial Switch Setup (For Analog Speed Dome, HDCVI Speed Dome) ............................................2

1.3.1 Dial Switch Description ....................................................................................................................2

1.3.2 Baud Rate and Parity.......................................................................................................................3

1.3.3 Address Setup...................................................................................................................................3

1.3.4 Terminal Matching Resistance Setup............................................................................................4

1.4 Reset and SD Card Installation (Network Speed Dome) ................................................................4

1.5 Installation...............................................................................................................................................5

2BRACKET DIMENSIONS .................................................................................11

2.1 Wall Mount Bracket .............................................................................................................................11

2.2 Corner Mount Bracket.........................................................................................................................11

2.3 Pole Mount Bracket .............................................................................................................................12

3WALL MOUNT BRACKET INSTALLATION......................................................13

3.1 Component Installation .......................................................................................................................13

3.2 Installation.............................................................................................................................................13

3.2.1 Installation Requirements..............................................................................................................13

3.2.2 Installation Steps.............................................................................................................................13

4CORNER MOUNT BRACKET INSTALLATION ................................................15

4.1 Component Installation .......................................................................................................................15

4.2 Installation.............................................................................................................................................15

4.2.1 Installation Requirements..............................................................................................................15

4.2.2 Installation Steps.............................................................................................................................15

5POLE MOUNT BRACKET INSTALLATION ......................................................17

5.1 Installation Components .....................................................................................................................17

5.2 Installation.............................................................................................................................................17

5.2.1 Installation Requirements..............................................................................................................17

5.2.2 Installation Steps.............................................................................................................................17

6APPENDIX ⅠTHUNDER PROOF AND SURGE PROTECTION .......................19

7APPENDIX ⅡABOUT RS485 BUS ..................................................................20

7.1 RS485 Bus Main Feature ...................................................................................................................20

7.2 RS485 Bus Transmission Distance ..................................................................................................20

7.3 The Problem in Practical Use ............................................................................................................20

7.4 RS485 Bus FAQ ..................................................................................................................................21

iii

Welcome

Thank you for purchasing our speed dome!

Please read the following safeguards and warnings carefully before you install or use the

product!

Important Safeguards and Warnings

Safety Measures

1. Qualified Engineer Needed

The installation engineer or maintenance engineer shall have corresponding CCTV system

installation certificate or maintenance qualification certificate.

The installation engineer or maintenance engineer shall have qualification certificate for work

at height.

The installation engineer or maintenance engineer shall have the basic knowledge and

operation technique for low-voltage cable layout and low-voltage electronic cable connection.

Please read the installation manual carefully and keep it well for future reference,

We are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

Please select the proper speed dome installation mode and use the lifting appliances at the

safety environment.

The lifting appliances shall have the enough capacity to reach the installation height.

The lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

Warning: It is to alert you there is an optional risk of death or series injury!

Note: It is to alert you there is an optional risk of damage or property loss!

Warning

1. All installation and operation here should conform to your local electrical safety codes. We

assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.

3. Do not connect several speed domes to one power adapter. It may result in overheat or fire

if it exceeds the rated load.

4. Before you connect the cable, install or uninstall, or begin the daily maintenance work,

please turn off the power and unplug the power cable.

5. Please make sure the produce is secure firmly on the wall or the ceiling.

6. Please turn off the power and unplug the power cable, If there is any smoke, disgusting

smell, or noise. Please contact your local retailer or customer service centre for help.

7. All the examination and repair work should be done by the qualified service engineers. We

are not liable for any problems caused by unauthorized modifications or attempted repair.

Note

1. Safety Transportation

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

This series product must use split type package during the transportation.

We are not liable for any damage or problem resulting from the integrated package during

the transportation.

2. When device is malfunction

Shut down the device and disconnect the power cable immediately if there is smoke, abnormal

smell or abnormal function. Please contact your local retailer ASAP.

3. Do not try to dismantle or modify the device

There is risk of personal injury or device damage resulting from opening the shell.

Please contact your local retailer if there is internal setup or maintenance requirement.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

4. Do not allow other object falling into the device

Please make sure there is no metal or inflammable, explosive substance in the speed dome.

The above mentioned objects in the device may result in fire, short-circuit or damage.

Please shut down the device and disconnect the power cable if there is water or liquid falling

into the camera. Please contact your local retailer ASAP.

Please pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully

Do not allow this series product fall down to the ground.

Avoid heavy vibration.

6. Installation Environment Requirement

This series speed dome should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

This series product shall be away from the strong electromagnetism radiant, please keep it

away from wireless power, TV transmitter, transformer and etc.

7. Daily Maintenance

Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning

liquid to clean the shell and then use soft cloth to make it dry.

Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result

in shell transfiguration or paint flake.

Do not allow the plastic or rubber material to touch the shell for a long time. It may result in

paint flake.

1INTELLIGENT SPEED DOME INSTALLATION

1.1 Installation Preparation

Basic Requirement

All installation and operation here should conform to your local electrical safety codes.

Before installation, please open the package and check all the components are included.

Please make sure the speed dome installation environment and installation mode can meet

your requirement. If there is special requirement, please contact your local retailer for more

information.

We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

Check installation space and installation location intension

Please make sure the installation environment has enough space to install the speed dome and

its corresponding bracket.

Please make sure the ceiling, wall and the bracket can support the speed dome and its

corresponding installation component. It shall sustain the 8X weight of the speed dome.

About cable

Please select the cable according to your transmission distance.

The minimum video coaxial-cable requirement is:

75 ohm.

Full cable with copper conductor

95% knitted copper shield

International Model

Max Distance

(Ft\M)

RG59/U

750Ft (229M)

RG6/U

1,000Ft (305M)

RG11/U

1,500Ft (457M)

Note: The above can be applied to analog speed dome and network speed dome

International Model

Max Distance

(M\Ft)

SYV-75-3

720P（25fps\30fps)：500M/1640Ft

720P（50fps\60fps)：300M/984Ft

1080P（25fps\30fps):300M/984Ft

Note: The above can be applied to HDCVI speed dome

Set dial switch button

Set dial switch button according to control protocol and speed dome address. (Please refer to

user’s manual for detailed information.)

Please keep all package material well for future use

Please keep speed dome package material well in case you need to send it back to your local

retailer or manufacturer for maintenance work.

Non-original package material may result in device damage during the transportation.

Check Accessories

Before the installation, please check the accessories one by one according to the packing list.

Please make sure all the components listed are included.

1.2 Initial Setup

The default setup is:

Address: 1

Baud rate: 9600

Party: none

120Ωmatched resistance: OFF

1.3 Dial Switch Setup (For Analog Speed Dome, HDCVI Speed Dome)

1.3.1 Dial Switch Description

Before you control the speed dome, please set the address, baud rate and parity first so that the

speed dome can has response to the control command. See Figure 1-1.

▲Note：

Open the transparent enclosure of the speed dome; you can see the dial switch button on the

PTZ main board. Please follow the steps listed below to set the baud rate, address, parity and

etc. After some related information has been reset, users have to cut the power and reboot the

speed dome to activate new setup!

SW2, SW3 are the two dial switches on the PTZ of the speed dome which are used to confirm

the parameters such as the address, Baud rate and parity. When the button is ON, it is 1. For

SW2 dial switch, 1 is the lowest bit and the 8 is the highest bit. For SW3, 1 is the lowest bit and

4 is the highest bit. (Intelligent speed dome self-adapt PELCO-D, PELCO-P, industry standard

protocol, there is no need to pass dial switch setup for the control protocol).

Figure 1-1

1.3.2 Baud Rate and Parity

The dial switch SW3 is to set speed dome baud rate and parity. It ranges from 1 to 4. The 1st and

the 2nd are to set baud rate. The 3rd and the 4th are to set parity. See Figure 1-2.

Figure 1-2

Please refer to the baud rate sheet for detailed information.

Baud Rate

OFF

9600bps

OFF

4800bps

OFF

2400bps

1200bps

Please refer to the parity setup sheet for detailed information.

Parity

OFF

NONE

OFF

EVEN

OFF

ODD

NONE

1.3.3 Address Setup

Please refer to Figure 1-3 for SW2 address setup. The speed dome use dial switch to set

address number, encode mode adopts binary coding. Bit 1-8 is valid bit; the highest address bit

is 255.

Figure 1-3

You can refer to the following sheet for more information.

Address

OFF

……

…………………………………………………………………

254

OFF

Tabla de contenidos

Otros manuales de Cámara de seguridad de Dahua

Dahua

Dahua IPC-HDW8341X-3D Instrucciones de funcionamiento y mantenimiento

Dahua

Dahua D-SD6AL445XA-HNR Manual de usuario

Dahua

Dahua DH-SD1A404XB-GNR-W Manual de usuario

Dahua

Dahua HAC-HUM1220G-M Manual de usuario

Dahua

Dahua DH-IPC-HDBW5442HN-ZHE Manual de usuario

Dahua

Dahua D-IPC-HDBW3541R-ZAS-S2 Manual de usuario

Dahua

Dahua HFW2100R-VF Manual de usuario

Dahua

Dahua ipc-hdbw2300r-z Manual de usuario

Dahua

Dahua SD6AE230F-HNI Manual de usuario

Dahua

Dahua F Series Manual de usuario

Dahua

Dahua N45EFNZ Manual de usuario

Dahua

Dahua D-HAC-HFW2249TP-I8-A-LED-3.6 Manual de usuario

Dahua

Dahua CA-DBW481BP Manual de usuario

Dahua

Dahua DH-IPC-HDW2431TP-ZS-27135-S2 Manual de usuario

Dahua

Dahua HFS7842N-Z-5G-LED-P Manual de usuario

Dahua

Dahua DH-IPC-WDX2 Manual de usuario

Dahua

Dahua HD Cube Network Camera Manual de usuario

Dahua

Dahua DH-IPC-GX6 Manual de usuario

Dahua

Dahua SD59225I-HC Manual de usuario

Dahua

Dahua DH-IPC-PFW8800N-A180 Manual de usuario

Dahua

Dahua HAC-HF3101 Manual de usuario

Dahua

Dahua 6AE240VNI Manual de usuario

Dahua

Dahua N53AL52 Manual de usuario

Dahua

Dahua IPC-HDW3849H-AS-PV Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario