Daewoo DTU-14D3 Manual de usuario

Instruction

Manual

Instruction

Manual

P/N: 48586371E202

MODEL No.

DTU-14D3/20D3/21D3

-14D4/20D4/21D4

IDENTITY OF FEATURES ON LOCALAND REMOTE CONTROL

LOCAL CONTROL

REMOTE CONTROL

MAIN

POWER

BUTTON VIDEO

INPUT AUDIO

INPUT HEAD

PHONE STAND-BY

INDICATOR REMOTE

SENSOR MENU

BUTTON

VOLUME

DOWN/UP

BUTTONS

PROGRAMME

DOWN/UP

BUTTONS

TV/VIDEO

Front

123

456

789

NORMAL

SLEEP

RECALL

MOVE SKIPDEL

MODETIME

TELETEXT mode

POWER

NUMBER 0-9

TEXT MIX

PAGE UP

SUBPAGE

INDEX

PAGE DOWN

HOLD

MUTE

REVEAL

SIZE

CANCEL

G (Page UP)

R (Page DOWN)

B (VOL UP)

Y (VOL DOWN)

TV mode

POWER

NUMBER 0-9

PR (CURSOR)UP

VOLUME UP (CURSOR RIGHT)

OK(NORMAL)

PR(CURSOR) DOWN

VOLUME DOWN(CURSOR

LEFT)

MUTE

RECALL, MESH

SLEEP

SKIP

MOVE

DELETE

TELETEXT

MODE

TIME

OUT

BACK

CONTENTS

* Identity of features on Local and Remote Control 1

* Important safeguards 2

* Installation 3

After moving the set 3

Inserting Batteries into the Remote Control Unit 3

Aerial connection 3

Mains connection 3

Switching the set on and off 3

Tuning the TV Channels 4

Edit 4

Manual Channel Setting 5

* Daily use 6

Selecting a Programme Number 6

Volume and Picture control 6

Timer 6

Sleep 7

Recall 7

Child Lock 7

Mode 7

OSD MESH function 7

16:9, ZOOM function 7

Local control key Mode 8

*Connecting the External Equipment 8

*TELETEXT 8

IMPORTANT SAFEGUARDS

Water / Moisture: Never install the set in the following places: in the bathroom, in a wet base-

ment.

Do not place any containers with liquid (e.g. flower vases) on the set.

Heat: Never place the set near heat sources (e.g. radiator).

Ventilation: Do not cover the ventilation openings on the cabinet.

Never place the set in a confined space such as a bookcase or built-in cab-

inet, unless proper ventilation is provided.

Leave a 10Cm gap all around the unit.

Object Entry: Do not insert foreign objects, such as needles and coins, into the ventila-

tion openings.

Lightning Striking: You should disconnect your set from the mains and the aerial system dur-

ing thunderstorms.

Cleaning: Unplug the set from the mains before cleaning.

INSTALLATION

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the MAIN

POWER button must be switched off for at least 15 minutes in order

to take out a colour strain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover.

Insert the batteries supplied(two 1.5V, type AAA).

Make sure that the polarity matches with the (+) and (-) marks inside

of the battery compartment.

Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is

the most important.

If you are located in a relatively strong area, you will be able to use the

indoor aerial.

When using an outdoor aerial, it is usually connected to the set with

75 ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with AC100~250V,

50/60 Hz.

SWITCHING THE SET ON AND OFF

Switching On

Switch the set on with the MAIN POWER button in front of the receiv-

er. The set will be turned on.

If not, press either : - PR UP or DOWN button on the front of set - or

POWER button or the UP/DOWN buttons or one of the NUMBER

buttons 0..9 on the remote controller.

The STAND-BY INDICATOR will be flickering during 5 times and a

picture will be appeared on the screen.

Switching Off

Press POWER button on the remote controller to return the set to its

stand-by mode.

The STAND-BY INDICATOR will illuminate.

If you don't use the set for extended period of time, turn it off with

MAIN POWER button in front of the receiver.

AUTO SEARCH UHF >>

MAIN MENU

PICTURE

TIMER

LANGUAGE

PRESET

EDIT

PRESET

P01 P--

AUTOB/D

PRESET

P01 P--

AUTOB/D

EDIT

P SKIP P SKIP

00 ---- NO

01 ---- NO

02 ---- NO

03 ---- NO

04 ---- NO

05 ---- NO

06 ---- NO

07 ---- NO

08 ---- NO

09 ---- NO

EDIT

P SKIP P SKIP

00 ---- NO

01 ---- NO

02 ---- NO

03 ---- NO

04 ---- NO

05 ---- NO

06 ---- NO

07 ---- NO

08 ---- NO

09 ---- NO

DELETE 01

EDIT

P SKIP P SKIP

ARD

ZDF

BR3

SAT1

04 PR07 NO

05 RTL2 NO

06 ---- NO

07 ---- NO

08 ---- NO

09 ---- NO

MOVE 06

TUNING THE TV CHANNELS

MAIN MENU

Press the MENU button to call up the MAIN MENU.

The MAIN MENU consists of 5 sub-menus:

PICTURE, TIMER, LANGUAGE, PRESET, EDIT menu.To enter each

MENU you must press OK button with the cursor on that MENU.

LANGUAGE SELECTION

Select a LANGUAGE menu at the MAIN MENU by placing the cursor

on the LANGUAGE with UP/DOWN buttons and pressing the OK but-

ton. You can choose language you require with UP/DOWN buttons.

Press the MENU button to return to the MAIN MENU.

AUTOMATIC TUNING SYSTEM

Select the PRESET menu and push “OK” button at the MAIN MENU.

Place the cursor at ""with the RIGHT button.

Press OK button and the cursor will move from left to right on the

VHF-L line, then VHF-H, then UHF.

Please wait until the EDIT MENU appears.

EDIT

The EDIT menu shows you the programme position assignment.

You can change this programme position assignment according to

your personal preferences.

SKIPPING THE CHANNELS

You can select SKIP "YES" or "NO" with the SKIP button.

A programme marked with SKIP "YES" is skipped when changing

channel using the UP/DOWN buttons. A skipped programme number

selected by NUMBER buttons 0..9 will be displayed in red.

DELETE PROGRAMME POSITION DATA

Position the cursor to programme number to delete with the

UP/DOWN, LEFT/RIGHT buttons.

Press the DEL button. While this is being carried out the "DELETE

Prog. No." appears and the "deleted" programme is moved to the pro-

gramme no. 99 and the programs below the deleted programme no.

will be shifted to the programme no. lower by one. The programme

moved to no. 99 will be initialized to SKIP “YES”. The programme

located in the programme no. 99 will move to the programme no. 98

CHANGING THE ORDER OF THE CHANNELS

Position the cursor to programme number to move and press the

MOVE button. The "MOVE Prog. No." will appear.

Position the cursor to programme number to exchange and press the

MOVE button. Two programmes will be exchanged.

ENTERING A STATION NAME, CHANGING THE PROGRAMME

NUMBER AND COPYING A PROGRAMME

You can go to the PRESET menu directly for entering a station name

and changing the programme number and copying a programme to

another programme No. by pressing the OK button.

Refer to the MANUAL CHANNEL SETTING.

SEARCH UHF >>

PRESET

P01 P--

AUTOB/D

FINE TUNE UHF >

PRESET

P01 P--

AUTOB/D

PRESET

P01 P--

AUTOB/D

PRESET

P01 P--

AUTOB/D

PRESET

P01 P02

AUTOB/D

----

BBC

STAR

SAU1

SAU2

MTV

B/D

I/M

You can also call up the PRESET menu at the MAIN MENU.

Press the NUMBER buttons 0..9 or UP/DOWN buttons to select a pro-

gramme number you want.

The screen will change according to the selected programme number.

SEARCHING A CHANNEL

At first, the sound and colour system have to be set according to the

broadcasting system.(ex, B/D,AUTO-----)

Locate a cursor to with LEFT/RIGHT button and then press

the UP or DOWN button.

The tuning screen will appear and the cursor will move from left to right

if you press the UP button and vice-versa. The channel will be

searched from the band area of current programme. After searching a

station, the tuning screen will disappear.

To stop searching, press the MENU button.

FINE TUNING

If you are unable to get a good picture or sound because of a poor

broadcasting signal, it is possible to adjust the fine tuning.

Move the cursor to and press UP or DOWN button to activate

fine tuning.

It operates only when the UP or DOWN button is being pressed.

The changed PR No. is memorized automatically.

At this time, PR No. will be changed from white to cyan.

ENTER A STATION NAME

Locate a cursor to with LEFT/RIGHT button, then a station name

will be displayed on the screen.

Select one in the station name list pressing UP/DOWN and OK but-

ton.

If you want to delete a station name, select “

----

”.

If you can't find the desired station name in the list, you can enter on

your own. To do so, move the cursor to the right and press OK button.

Using the UP/DOWN buttons, select the desired letter, number or blank.

Press the RIGHT button to select the next position.

Press the OK button to complete this procedure.

SELECT SOUND SYSTEM

If you hear strange sound or noise sound, then move the cursor to

" or " with the LEFT/RIGHT buttons so that sound system

table will be displayed on the screen.

Select the sound system " or " with the UP/DOWN but-

tons, then sound will be changed automatically .

TO STORE PROGRAMME IN MEMORY

Move the cursor to the right end with the LEFT/RIGHT buttons.

Select the programme number where you want to store current dis-

played programme using the UP/DOWN buttons or NUMBER 0..9.

Press the OK button.

MANUAL CHANNEL SETTING

B/D I/M

VOLUME CONTROL

Adjust the volume with the VOLUME DOWN/UP buttons on the front of the

set, or with the LEFT/RIGHT buttons on the remote controller.

MUTE

Pressing the MUTE button once turns the sound off.

The sound returns if the button is pressed once more.

NORMAL PICTURE SELECTION

When you press the OK button repeatedly you can call up three picture

settings;

for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE

(adjustable picture).

PICTURE CONTROL

Press the MENU button to call up the MAIN MENU.

Press the OK button to call up the PICTURE MENU.

You can select each function with the UP/DOWN buttons.

Use the LEFT/RIGHT buttons to adjust each function:

BRIGHTNESS( ) - CONTRAST( ) - COLOUR( ) -

SHARPNESS( ) - TINT( ) - BLUEBACK(BB).

* Yon can set BB function ON/OFF by using LEFT/RIGHT buttons. If you

set BB function ON, you can see the blue-colored screen when the TV

receives no signal.

* The TINT is active only in NTSC system.

* The picture-controlled value is stored in FAVOURITE mode automatically.

In the MAIN MENU, Select TIMER menu.

SETTING THE CLOCK

Press the OK button on the CLOCK line.

Set the hour and minute with the NUMBER buttons 0..9. Press the OK but-

ton to complete. The clock will start.

Note that if you turn the TV off with MAIN POWER button, the clock set-

ting is lost and must be reset if necessary.

SETTING THE OFF TIME

Set OFF TIME in the same way as the SETTINGTHE CLOCK above. Set

ACTIVATE “YES” or “NO” with the LEFT/RIGHT buttons. When ACTI-

VATE is “YES”, the function is enabled.When OFF TIME is operative, the

set will switch off at the set time.

SETTING THE WAKE UP TIME

Set WAKE UP TIME in the same way as the SETTING THE CLOCK

above.

Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT buttons.

When ACTIVATE is "YES", the function is enabled.

Set WAKE UP PROG using the NUMBER buttons 0..9 or UP/DOWN but-

tons.

When WAKE UP TIME is operative, the set will switch on to this pro-

gramme number at the set time.

PICTURE 31

BB ON

TIMER

CLOCK 12:20

OFF TIME

WAKE UP TIME --:--

ACTIVATE YES

WAKE UP PROG P 45

--:--

TIMER

CLOCK 12:20

OFF TIME

WAKE UP TIME 7:00

ACTIVATE YES

WAKE UP PROG P 45

--:--

TIMER

CLOCK 12:20

OFF TIME 23:50

WAKE UP TIME 07:00

ACTIVATE YES

WAKE UP PROG P 45

DAILY USE

SELECTING A PROGRAMME NUMBER

The set has a total of 100 programme number, 0..99.

The NUMBER buttons 0..9 are used for direct programme selection.

In order to select two-digit programme, press the second numbered but-

ton within two seconds.

Switch through the programme number step by step with the UP/DOWN

buttons.

VOLUME AND PICTURE CONTROL

TIMER

SLEEP

By pressing the SLEEP button repeatedly, you can select one of the

following settings:

0 -> 30min. -> 60min. -> 90min. -> 120min. -> 0

The set will be turned off after time you select.

Automatic Switch-Off in No broadcast Signal

If a broadcasting signal is not present for about 30 minutes, the set will

be automatically turned off.

In AV mode, however, this function does not operate.

RECALL

The RECALL button is used to display the current status: programme

number, station name, clock.(left above) and system(right below)

This display appear for about 3 seconds unless any button is pressed.

CHILD LOCK

You can prevent the use of the TV set without the remote controller.

To activate CHILD LOCK function press MENU button and press the

TIME, MODE, , POWER button in sequence with the remote controller

within 5 seconds. Then theTV set will be child-locked. The child-lock func-

tion is indicated by flickering the STAND-BY INDICATOR. The TV can be

switched back on only using the remote controller.

Note that if the WAKE UP TIMER is enabled, the set will be turned on

though child-locked.

MODE

Pressing the MODE button on the remote controller, the current system of

the set will be displayed on the screen.

Whenever you press the MODE button, the system will be changed as

following

AUTO

>PAL

> SEC

> N3

> N4

>N5

the red colour of OSD means that the colour system is in “AUTO” mode.

OSD MESH FUNCTION

If you push the RECALL key with the MENU displayed in the screen,

the OSD except text will be MESHed. If you want to return to the nor-

mal OSD press the RECALL key again.

16 :9, ZOOM FUNCTION

Each time you press “SKIP” key except in “TEXT” and “EDIT” mode,

the size of the picture changes from normal 4:3 to 16:9, ZOOM, and

the original 4:3 in turn.

LOCAL CONTROL KEY MODE

You can call up the MAIN MENU without the remote controller.

You can enter the MAIN MENU directly by pressing the MENU

button. If you press the MENU button, the MAIN MENU will be

displayed on the screen. Move the cursor to the SUB MENU you

want by using the PR UP/DOWN buttons and press the

TV/VIDEO( ) button, then the SUB MENU will be displayed

on the screen. When the SUB MENU is displayed on the screen

you can set it by using the VOL UP/DOWN or the PR UP/DOWN

button. If you want to return to the last menu, press the

TV/VIDEO( ) button.

TELETEXT

SWITCHING TELETEXT ON/OFF

Press the TELETEXT button ( ). The index page viewed last

will appear.

Press the TELETEXT button to return to the TV mode.

COLOUR BUTTONS IN TOP/FLOF TELETEXT

A red, green, yellow and blue field are shown at the bottom of

the screen.

If TOP or FLOF teletext (FASTEXT) is transmitted by the sta-

tion, pressing the corresponding colour button on the remote

controller, you can select the desired page easily.

TELETEXT LANGUAGE SELECTION.

If you select Arabic or Persian in LANGUAGE of MENU, then

Automatically teletext language is selected with Arabic or

Persian, but If you select ENGLISH or FRANCAIS, you can

select Arabic or Persian teletext language.

And ENGLISH teletext language is available for all language

of MENU.

EARPHONE JACK

Insert the headphone plug into the headphone socket. The sound

from the speaker will be cut off.

AV MODE

SelectAV mode by pressing the TV/VIDEO button on the remote con-

troller or the (TV/VIDEO) button on the front of the TV set.

Press the TV/VIDEO button on the remote controller or the

(TV/VIDEO) button on the front of the TV set to return to theTV mode.

CONNECTING THE EXTERNAL EQUIPMENT

NOTE

The frontAV terminal and the back

AV terminal are common.

If you use the front AV terminal,

disconnect the back AV terminal

with the external equipment.

SELECTING PAGES

The NUMBER buttons 0..9 are used to enter a page number.

The selected page number appears at the top of the screen and

the page appears in a short time.

The UP/DOWN buttons increase or decrease the current page

number by 1.

INDEX PAGE

You can switch directly to the programme preview (with TOPtext)

or the overview page of the station you are currently viewing by

pressing the INDEX ( ) button.

PAGE HOLD

Several sub pages can be combined under a page number and

are scrolled at an interval determined by the television station.

The presence of sub pages is indicated by, for example, 3/6

beneath the time, which means that you are looking at the 3rd

page of a total of 6 pages.

If you want to look at a subpage for a longer period of time, press

the HOLD ( ) button.

The contents of the subpage shown are kept on the screen and

no longer updated or switched to other subpages.

Pressing the HOLD button again, the current subpage appear.

CALLING UP SUBPAGE DIRECTLY

Pressing the SUBPAGE ( ) button, "Page No./--" appears at the

bottom of the screen.

Enter the subpage number that you want to call up with the

NUMBER buttons 0..9, for example, the 2nd page, sequence

0002. The desired subpage is sought and displayed. To exit,

press SUBPAGE ( ) button again.

WATCHING TELEVISION DURING TELETEXT MODE

Some pages are continually updated, for example, stock market

reports, sports announcements, and the latest news.

If you want to watch television and stay informed at the same time,

press CANCEL ( ) button.

The regular programme is still visible and the teletext symbol(

)appears at the top of the screen.

Pressing the CANCELbutton again, the teletext page appears with

the updated information.

REVEAL ANSWER

This function can be used on certain pages to reveal the solution

of riddles.

Press the REVEALbutton ( )to reveal a hidden answer and press

again to hide it.

DOUBLING CHARACTER SIZE

Repeatedly pressing the SIZE button ( ) doubles the character

size in the following order: Upper half of the page-> Lower half of

the page-> Return to normal size.

VOLUME CONTROL IN TELETEXT MODE AND IN MIX MODE

Pressing the MENU button in TELETEXT mode and TEXT MIX

mode, the volume control menu will be displayed in the bottom of

the screen.

You can adjust volume using the corresponding colour button on

the remote controller.

TEXT MIX

If you press the A/V ( ) button in teletext Mode, MIX/TEXT will

be toggled.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de Daewoo

Daewoo

Daewoo DTQ-29M2FS Manual de usuario

Daewoo

Daewoo DLP-2612 Manual de usuario

Daewoo

Daewoo DDT-21H9ZDF(21") Manual de usuario

Daewoo

Daewoo DTQ-29S2FCC Manual de usuario

Daewoo

Daewoo DTQ 29G1FC Manual de usuario

Daewoo

Daewoo DTQ-14J4FC Manual de usuario

Daewoo

Daewoo DTH-20D5FSN Manual de usuario

Daewoo

Daewoo DTC-14Q1TX Manual de usuario

Daewoo

Daewoo DTQ-29U1SC/SSP Manual de usuario

Daewoo

Daewoo DTQ-29S3FC Manual de usuario

Daewoo

Daewoo DTM-28 Series Manual de usuario

Daewoo

Daewoo DTQ-20U9SC Manual de usuario

Daewoo

Daewoo DTM-29U7Z SERIES Manual de usuario

Daewoo

Daewoo DSC-3210E Manual de usuario

Daewoo

Daewoo DTY-2896 TF Manual de usuario

Daewoo

Daewoo DUA-3270GB Manual de usuario

Daewoo

Daewoo KR14E5 Manual de usuario

Daewoo

Daewoo DTQ-29M2FS Manual de usuario

Daewoo

Daewoo T011 Manual de usuario

Daewoo

Daewoo KR14E5/DTA-14V3VM Manual de usuario

Daewoo

Daewoo DTQ 27S2FCC Manual de usuario

Daewoo

Daewoo SuperVision GB14Q2T Manual de usuario

Daewoo

Daewoo TVZ 1341X Manual de usuario

Daewoo

Daewoo DTQ-21U4SSN Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario