Daewoo DTE-28 Series Manual de usuario

COLOUR TELEVISION

MODEL No.

DTE-28_

INSTRUCTION MANUAL

If you require any technical assistance or advice on this product, please

contact your catalogue help-line number.

CONTENTS

Features on the television 3

The remote control buttons Television mode, Teletext mode 4

Setting up your television 5

Safety and care, Make the connections 5

Putting batteries in the remote control 5

Supply power, Switch on 5

Stand-by mode, switching off, Automatic power saving feature 6

Tuning in the programmes (ATSS) 7

Picture interference from other equipment 8

Menus for controlling and setting up the television

Picture controls, Sound controls 9

The install menu - automatic tuning (ATSS), programme editing menu and

manual tuning 10

Manual tuning 10

Current programme number, TV system selection by country, Tuning by broadcast or

cable channel number, Fine tuning, Tuning by frequency, Channel name, Programme

storage number Copying a programme to another number 10~12

Editing programmes 13

Move a channel, Delete a channel, Skip 13

The features menu 14

How to display the features menu, Language - for the on-screen menus,

Picture format - normal or wide-screen, Child lock, Clock

Wake time and wake-up programme number 14

How to use the wake-up timer 15

The sleep function 16

The mode button 16

Teletext 17~18

The scart and AV sockets 19

Selecting the scart channels, Video and RGB, S-video or S-VHS

NTSC and tint control 19

Automatic video switching, Equipment that can be connected. 19

Connecting other equipment-about various combinations of equipment 20

Using and caring for your television 22

Position 22

Use, Position, Moving the television ,coloured patches and magnetism 22

Use, Position, Ventilation, Water and Moisture, Stands and supports, Cleaning, Good advice

Electrical safety warnings 22

Specifications 23

Notice

Although we have made every effort to make these instructions are correct, we cannot

accept responsibility for errors and or missing information which are due to circumstances

beyond our control.

•You can get to the controls on the front of the television by pushing the triangle at the top centre of

the cover flap. The flap will fall open. Push the flap again to close it.

The channelVbutton increases the programme number and the channelWbutton decreases it.

The volume controlVbutton makes the sound louder and the volume controlWbutton makes the sound

quieter.

The headphone socket takes a 3.5mm diameter plug.

Warning! Prolonged listening through headphones at high volume may damage your hearing.

Features on the television and the remote control

Features on the front of the television

Features on the back of the television

ANT AV1 AV2

Aerial socket

Scart AV socket (1)

Scart AV socket (2)

Teletext mode

Only the buttons listed below will work

when the television is in teletext mode.

1 Stand-by button.

2 The number buttons are used to

select teletext page numbers.

3 The index button displays the

teletext index page.

4 The mix button shows the

normal picture behind the text.

5 Each press of this PR button

increases the page number by one.

6 The sub-page button is for

selecting a particular sub-page.

7 The MENU button switches

between brightness and volume

controls and fast text headings

while you are reading teletext.

8 Each press of this PR button

decreases the page number by one.

9 The hold button prevents the

teletext page you are reading from

changing.

10 Sound mute button.

11 The reveal button reveals and

hides answers to quizzes.

12 The size button changes the

size of the text on the screen.

13 The cancel button displays the

normal picture but leaves teletext

mode working.

14,15, 17 and 18 coloured buttons

select from a list of headings

which have the same colours as

the buttons.

16 The teletext button switches

between teletext and normal

television modes.

See pages 17 and 18 about

teletext.

The remote control buttons

Television mode

1 The stand-by button switches

the television on or puts it back on

stand-by (page 6).

2 The number buttons are mainly for

changing channels.

3 NORMAL means this button

selects different picture settings

(page 9), OK means it confirms

choices in the on-screen menus or

stores a setting (page 9).

4 bThis button selects audio and

video (AV) inputs (page 19).

5, 8 The PR buttons change the

programme number up (button 5)

or down (button 8) and select

controls in the on-screen menus.

6 The volume increase button

makes sound louder or changes

settings in the on-screen menu

controls.

7 The menu button displays on-screen

menus for tuning in programmes

and adjusting sound, picture and

special feature controls (page 9).

9 The volume decrease button

makes sound quieter or changes

settings in the on-screen menu

controls.

10 The mute button turns the

sound on and off.

The recall button turns the programme

information display on and off.

The SLEEP button sets the television to

go on stand-by after a certain number

of minutes(see page 16).

14 MOVE, 15 SKIP and 17 DELETE

buttons are for editing the pro-

gramme list.

18 The MODE button allows you to

choose the type of sound (see

page 16).

Buttons 13 and 16 are only used

for teletext

123

456

789

NORMAL/OK

SLEEP

RECALL

MOVESKIP

MODEDELETE

Setting up your television

1 Please read the safety and care information at the back of this booklet before you

connect this television to the electricity supply. Then follow steps 2 to 5 below.

2 Make the connections

The aerial

Connect the aerial lead to the ANTgsocket at the back of

the television. You will need a good-quality aerial to receive

teletext and nicam sound.

Other equipment

If you have a video recorder you will need to connect the aerial lead

to the video recorder and connect the aerial output lead from the video recorder to the television aerial socket.

Information about connecting aerials and other equipment is given in 'Connecting other equipment' on page 21.

The scart AV sockets

This television has two special interconnecting sockets called 'scart' (AV). You don't have to use these straight

away, but using scart cables gives you the best picture and sound quality and can cure some picture interference

problems. And you will only get stereo sound from other equipment if it is connected with a stereo scart cable. If

you have other equipment with scart sockets please read 'Connecting other equipment' on page 21.

3 Put the batteries in the remote control

Press the edge of the catch at the top of the battery cover towards the cover

and lift off the cover.

Put in the two batteries that came with your television (size AAA or LR3).

Make sure that the (+) and (-) marks on the batteries agree with the (+) and (-)

marks inside the battery compartment.

Replace the cover by engaging the two tabs at the bottom and pressing down

the end with the catch until it clicks into place.

•Throw away old batteries carefully. Do not put them on a fire.

•When you are using the remote control, keep within thirty degrees and seven

metres of the remote control sensor on the front of the television.

•Bright sunlight and some fluorescent light falling on the remote control

sensor may stop the remote control from working properly.

4 Supply power

Plug your television into the mains supply (220 to 240 volts, 50Hz).

5 Switch the television on

Switch the television on with the main power button (ON/OFF) on the television. After a few moments the

screen should light up.If it doesn’t, check the stand-by light on the front panel and if it is red press the stand-by

button once.

You are now ready to tune in the broadcasts you can receive, but please read 'Stand-by mode' and

'Switching the television off' on the next page before you turn to 'Tuning in the programmes'.

Stand-by mode

Stand-by mode allows you to:

•turn the television on and off with the remote control;

•turn the television on with the wake-up timer; and

•turn the television off with the sleep timer.

When the television is on stand-by, the stand-by light comes on red.

The television uses little power when it is on stand-by, but you should

switch it off at the main power switch to save energy and be safe

when you are leaving the television for a long time.

When the television is on stand-by you can switch it on by pressing

any of the following buttons.

The stand-by button .

One of the number buttons 0 to 9.

One of the PR buttons on the remote control.

The PRVor PRWbutton on the front panel of the television.

When you switch the television on, the stand-by light will change from red to green and after a few seconds

the screen will light up. If you want to put the television back on stand-by, press the red stand-by button

on the remote control again.

Switching the television off

Press the red stand-by button on the remote control to put the television back on stand-by, or press the

main power button to switch it off completely.

Automatic power-saving feature

If no signal is received through the aerial cable or from any external equipment, after about thirty minutes

the television will automatically go on stand-by.

123

456

789

NORMAL/OK

Press the OK button to display the INSTALL menu.

•Make sure the country listed against 'ATSS' is the

country you are in.

If you need to change the country, press one of the

volume

()

buttons until the correct abbreviation

shows.

1 Make sure you have followed steps 1 to 5 under 'Setting up your television' and read 'Stand-by mode'.

2 If you have a video recorder connected with the aerial lead, switch it on to produce a test picture, or play a

video tape.

3 If you have a satellite receiver (or any other piece of equipment as well as the video recorder) connected

with the aerial lead, make sure that it is plugged in and that it is on stand-by.

4 Switch on the television. If the screen does not light up, please check the previous sections 'Supply power',

‘Switch on the television’and 'Stand-by mode'.

Tuning in the programmes

Before you start

Press the MENU button to make the picture, sound,

features and install boxes appear on the screen.

•Whenever a menu is displayed, if you do not press a

button within 30 seconds the menu will go off.

•If you find a menu asking you to set the on-screen

menu language, press the volume increase button to

change the setting (GB stands for Great Britain).

Press the MENU button to finish.

Press the volume increase button and then the PR down button to move

the green highlight to 'INSTALL'.

PICTURE SOUND

FEATURES INSTALL

PICTURE SOUND

FEATURES INSTALL

INSTALL

ATSS GB

EDIT

SYSTEM GB

CHANNEL C55

FREQ 743.25

NAME BBC1

PROGRAM 01

STORE TO 01

VPosition CBAdjust

WOK Access

MENU Exit

NORMAL/OK

1 menu

3OK

2volume increase, PR down

Country abbreviations

PL - Poland H - Hungary CZ - Czecho Other

4 OK The 'ATSS' line will be highlighted in green.

Press and hold the OK button for at least three

seconds to start the automatic tune, search and store

process (ATSS).

The on-screen display will ask you to wait and you will

see the frequency changing ('freq'). 'Program' and

'store to' numbers increase as each station is stored

in the television's memory.

When the ATSS process has finished, you will see the

edit menu which shows you what programme

numbers the stations have been stored under. If these

are correct, just press the MENU button or wait a few

seconds until the edit menu goes off. If you are not

happy with the order the programmes are in, you can

use the edit menu to re-arrange them.

•Your television might not name a satellite receiver or

video recorder properly, so you will need to use the

edit menu to change the name.

•Sometimes the ATSS process will not store the

best-quality signal on the programme number you

would like, so you will see a grainy picture or a

distorted picture. You will need to use the edit menu

to change the programme number.

•

If you need to change anything using the edit

menu, please read 'Editing programmes' on page 10.

•

If you have poor-quality pictures or interference,

please read 'Picture interference from other

equipment' below.

INSTALL

ATSS GB

EDIT

SYSTEM GB

CHANNEL C55

FREQ 743.25

NAME BBC1

PROGRAM 01

STORE TO 01

MENU Exit

PLEASE WAIT!

EDIT

PR NAME CH SKIP

05 CH5 C37

04 CH4 C64

03 ITV C59

02 BBC2 C62

01 BBC1 C55

00 ------ - ---

99 ------ - ---

VPosition Move

WDelete

MENU Exit Skip

Picture interference from other equipment

If you have used the aerial lead to connect a video recorder, satellite receiver or other piece of equipment,

switch the equipment on one piece at a time and check the picture on all your programmes. The pieces of

equipment that are not switched on must be on stand-by. If any of your programmes have wavy lines on the

picture when the equipment is switched on, you will have to change the output frequency of that equipment.

Please read the instruction book for the equipment to find out how to do this. Change the output frequency a

little at a time (or in 8MHz steps) and keep checking all your programmes.

When there are no wavy lines (or other interference) on any of the pictures, re-tune the programme number

that you have chosen for your equipment (see 'Manual tuning'). Do the same for each piece of equipment ,

but after you've finished with each one, leave it switched on while you check the next piece of equipment.

Continue to do this until you have all the pieces of equipment working together without any interference. If you

cannot get rid of the interference, you may have to connect the equipment with a scart cable (see 'Connecting

other equipment') .

NORMAL/OK

•Select and adjust brightness, contrast,colour •Select and adjust volume as described above.

and sharpness as described above.

When the speakers on the screen face

•

The values you select are automatically stored

outwards, the sound effect makes mono sound

and you can bring these back by pressing the

like stereo and it makes stereo sound as if the

NORMAL button during normal viewing.

speakers were further apart.

•If you keep pressing the normal button it

Bass and treble change the volume of low-frequency

brings back two other picture settings,

and high-frequency sounds. Balance shifts

‘Normal I’and ‘Normal II’, which have different the sound between the left and right speakers.

fixed levels of brightness, contrast and colour

•For NTSC videos the ‘tint’function appears.

See ‘NTSC and tint control’on page 19.

Display the sub-menu as described Use the volume buttons to adjust the function.

in steps 1 and 2 in ‘Main menu’

above, then use the PR buttons to

select the function you want to change.

The install menu is slightly different. 3 Return to the main menu by pressing the MENU

button. Press it again to return to normal viewing.

In this menu you

press OK to enter the

programme editing

menu or store a

channel.

Menus for controlling and setting up the television

1 Press the remote control MENU button to display the main menu. A choice of several sub-menus appears

on the screen.

2 To select one of the sub-menus, press the 3 To get back to normal television, just keep pressing

PR or (volume) buttons to highlight the MENU button until all the menus have

the sub-menu you want, then press the gone from the screen.

OK button.

All the menus go off the screen within 30 seconds if you don’t press any buttons.

A box at the bottom of the screen reminds you what the buttons do.

Main menu

How to use sub - menus

Right

Left

Down

Move up

Move down

Decrease Increase

NORMAL/OK

Sound menu

Picture menu

PICTURE SOUND

FEATURES INSTALL

1AdjustSelect 2

PICTURE

BRIGHT CB

CONTRSAT CB

COLOUR CB

SARAP CB

SOUND

VOLUME CB

BASS CB

TREBLE CB

BALANCE CB

EFFECT CB

Tabla de contenidos

Otros manuales de TELEVISOR de Daewoo

Daewoo

Daewoo DTQ-2132SSS Manual de usuario

Daewoo

Daewoo DTE-29G3ZZR Manual de usuario

Daewoo

Daewoo DTY-25G1 Manual de usuario

Daewoo

Daewoo DTQ 25G1TS Manual de usuario

Daewoo

Daewoo CHASSIS : SC-150 Model : DSC-3220E Manual de usuario

Daewoo

Daewoo DTJ-28 Manual de usuario

Daewoo

Daewoo DTR-29M5MP Manual de usuario

Daewoo

Daewoo DTQ-21U4SSN Manual de usuario

Daewoo

Daewoo DTQ-14U1FS/20U1FS Manual de usuario

Daewoo

Daewoo DTQ-14P2FCM Manual de usuario

Daewoo

Daewoo DTC Series Manual de usuario

Daewoo

Daewoo DTQ 26S1FC Manual de usuario

Daewoo

Daewoo DTY-29Z9 Manual de usuario

Daewoo

Daewoo CP21S8 Series Manual de usuario

Daewoo

Daewoo DTC-14Q1TX Manual de usuario

Daewoo

Daewoo DTQ-29S4FC Manual de usuario

Daewoo

Daewoo DTQ-21U6SC Manual de usuario

Daewoo

Daewoo DLP-26H1 Manual de usuario

Daewoo

Daewoo DTQ-20U4SC Manual de usuario

Daewoo

Daewoo DTH-211F Manual de usuario

Daewoo

Daewoo DTD-21H9 Manual de usuario

Daewoo

Daewoo DTL-29U8ZLP Manual de usuario

Daewoo

Daewoo DTQ 25S5FC Manual de usuario

Daewoo

Daewoo DTW - 28W2F Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario