Daewoo 2594ST Manual de usuario

Instruction Manual

(Stereo color television)

P/N:48586775E203

Colour Television

2594ST / 2898ST

VIDEO

AUDIO

L R

IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL

LOCAL CONTROL

REMOTE CONTROL

VIDEO

AUDIO

L R

Front

MAIN

POWER

BUTTON

VIDEO

INPUT HEAD

PHONE STAND-BY

INDICATOR REMOTE

SENSOR AV

BUTTON VOLUME

DOWN/UP

BUTTONS

PROGRAMME

DOWN/UP

BUTTONS

SCART

SOCKET1 SCART

SOCKET2

AERIAL

TERMINAL

Back

AUDIO

INPUT

SLEEP RECALL

SKIPMOVEDEL

TIME MODE

NORMAL

123

456

TELETEXT mode

POWER

NUMBER 0-9

Not Used

PAGE UP

SUBPAGE

INDEX

PAGE DOWN

HOLD

MUTE

REVEAL

SIZE

CANCEL

G (VOLUME UP)

R (VOLUME DOWN)

C (BRIGHT UP)

Y (BRIGHT DOWN)

TV mode

POWER

NUMBER 0-9

PR (CURSOR)UP

VOLUME UP (CURSOR RIGHT)

OK(NORMAL)

PR(CURSOR) DOWN

VOLUME DOWN(CURSOR LEFT)

MUTE

RECALL

SLEEP

SKIP

MOVE

DELETE

TELETEXT

Audio MODE

TIME

CONTENTS

* Identity of features on Local and Remote Control 1

* Important safeguards 2

* Installation 3

After moving the set 3

Inserting Batteries into the Remote Control Unit 3

Aerial connection 3

Mains connection 4

Switching the set on and off 4

Tuning the TV Channels 5

Edit 5

Manual Channel Setting 6

* Daily use 7

Selecting a Programme Number 7

Volume, Picture and Sound control 7

Timer 8

Sleep 8

Recall 8

Child Lock 8

Time 8

Mode 8

* Teletext 9

* Connecting the External Equipment 11

Water / Moisture : Never install the set in the following places:in the bathroom, in a wet base-

ment.

Do not place any containers with liquid (e.g. flower vases) on the set.

Heat : Never place the set near heat sources (e.g. radiator).

Ventilation : Do not cover the ventilation openings in the cabinet.

Never place the set in a confined space such as a bookcase or built-in-cabi-

net, unless proper ventilation is provided.

Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation

openings.

Lightning Striking: You should disconnect your set from the mains and the aerial system during

thunderstorms.

Cleaning : Unplug the set from the mains before cleaning.

IMPORTANT SAFEGUARDS

INSTALLATION

If the used set is moved or placed in a different direction, the

MAIN POWER button must be switched off for at least 15 min-

utes in order to take out a colour strain on the screen.

AFTER MOVING THE SET

Press down the battery compartment grip and slide the cover,

Insert the batteries supplied(two 1.5v, type AA).

Make sure that the polarity matches with the (+) and (-) marks

inside of the battery compartment.

Used batteries should be disposed of properly.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

For better picture and sound quality, an effective aerial installa-

tion is the most important.

If you are located in a relatively strong area, you will be able to

use the indoor aerial.

When using an outdoor aerial, it is ususlly connected to the set

by means of 75 ohm coaxial cable.

AERIAL CONNECTION

Plug the mains cable into the power socket with 220~240V 50Hz AC.

Additional Information for the set sold in Great Britain

The appliance is supplied with a moulded three pin mains plug fitted with a 5 Amp fuse. Should

the fuse require replacement, it must be replaced with a fuse rated at 5 Amp and approved by

ASTA or BSI to BS1362.

The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the

event of the fuse cover being lost or damaged, the plug must not be used until a replacement not

be used until a replacement cover has been obtained. Replacement fuse covers can be pur-

chased from your nearest electrical dealer and must be the same colour as the original.

If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any

other reason. Then the fuse should be removed and the cut off plug disposed of safely to prevent

the hazard of electric shock.

There is a danger of electric shock if the cut off plug is inserted into any socket outlet.

If a replacement plug is to be fitted, please observe the wiring code shown below. The wires in

the mains lead are coloured in accordance with the following code.:

Blue - Neutral, Brown - Live

As the colours of the wires in the mains lead of this appliance may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter

L or coloured red.

Do not make any connection to the terminal in the plug which is marked by the letter E or by the

safety earth symbol or coloured green or green and yellow.

MAINS CONNECTION

Switching On

Switch the set on with the MAIN POWER button, ( ). The set will turn on.

If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the

UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.

The STAND-BY INDICATOR will turn off and a picture will appear on the screen.

Switching off

Press POWER button ( ) on the remote controller to return the set to its stand-by mode.

The STAND-BY INDICATOR will illuminate.

If you don't use the set for extended period of time, turn it off with MAIN POWER button .

SWITCHING THE SET ON AND OFF

MAIN MENU

Press the MENU button to call up the MAIN MENU.

The MAIN MENU is consist of 5 sub-menus:

PICTURE, SOUND, TIMER, LANGUAGE, PRESET, EDIT

menu.

LANGUAGE SELECTION

Select a LANGUAGE menu at the MAIN MENU by placing the

cursor on the LANGUAGE with UP/DOWN button and pressing

the OK button. You can choose language you require with

UP/DOWN button.

Press the MENU button to return to the MAIN MENU.

AUTOMATIC TUNING SYSTEM

Select the PRESET menu at the MAIN MENU.

Place the cursor to " " with the RIGHT button.

Press and hold down OK button until the tuning screen appears

above the PRESET menu.

The cursor will move from left to right on the VHF-L line, then

VHF-H, then UHF.

Please wait until EDIT MENU appears.

TUNING THE TV CHANNELS

The EDIT menu shows you the programme position assignment.

You can change this programme position assignment according

to your personal preferences.

SKIPPING THE CHANNELS

You can selet SKIP "YES" or "NO" with the SKIP button.

A programme marked with SKIP "YES" is skipped when chang-

ing channel using the UP/DOWN button. A skipped programme

number selected by NUMBER button 0..9 will be displayed in

red.

DELETE PROGRAMME POSITION DATA

Position the cursor to programme number to delete with the

UP/DOWN, LEFT/RIGHT buttons.

Press the DEL button. While this is being carried out the

"DELETE" Prog. No." appear and the "deleted" programme is

moved to the programme no. 69 and changed SKIP "YES".

The programme located in the programme no. 69 will move to

the programme no. 68.

CHANGING THE ORDER OF THE CHANNELS

Position the cursor to programme number to move and press the

MOVE button. The "MOVE Prog. No." will appear.

Position the cursor to programme number to exchange and

press the MOVE button. Two programmes will be exchanged.

ENTER A STATION NAME, CHANGING THE PROGRAMME

NUMBER AND COPYING A PROGRAMME

You can go to the PRESET menu directly for entering a station

name and changing the programme number and copying a pro-

gramme to another programme no. by pressing the OK button.

Refer to the MANUAL CHANNEL SETTING.

EDIT

MAIN MENU

LANGUAGE

PICTURE

SOUND

TIMER

LANGUAGE

PRESET

EDIT

00 - - - - NO

01 - - - - NO

02 - - - - NO

03 - - - - NO

04 - - - - NO

P SKIP P SKIP

05 - - - - NO

06 - - - - YES

07 - - - - NO

08 - - - - NO

09 - - - - NO

AUTO SEARCH UHF >>

EDIT

00 - - - - NO

01 - - - - NO

02 - - - - NO

03 - - - - NO

04 - - - - NO

P SKIP

DELETE 01

P SKIP

05 - - - - NO

06 - - - - NO

07 - - - - NO

08 - - - - NO

09 - - - - NO

EDIT

00 ARD NO

01 ZDF NO

02 BR3 NO

03 SAT1 NO

04 PR07 NO

P SKIP

MOVE 06

P SKIP

05 RTL2 NO

06 - - - - NO

07 - - - - NO

08 - - - - NO

09 - - - - NO

EDIT

êìëëäàâ

ENGLISH

FRANCAIS

DEUTSCH

ITALIANO

PRESET

P01 P

PRESET

P01 P

You can also call up the PRESET menu at the MAIN MENU.

Press the NUMBER button 0..9 or UP/DOWN buttons to select a

programme number you want.

The screen will change according to the selected programme

number.

SEARCHING A CHANNELS

Locate a cursor to “ ” with LEFT/RIGHT button and then

press the UP or DOWN button.

The tuning screen will appear and the cursor will move from left

to right.

Pressing and holding down the UP/DOWN button during 2 sec-

onds, the band will change as following:

VL-VH-U (For GB, U only).

After searching a station, the tuning screen will disappear.

To stop searching, press the MENU button.

FINE TUNING

If you are unable to get a good picture or sound because of a

poor broadcasting signal, it is possible to adjust the fine tuning.

Move the cursor to and press UP or DOWN button to acti-

vate fine tuning up or down.

It only operates while the UP or DOWN button is being pressed.

The changes is memorized automatically.

ENTER A STATION NAME

Select station name in the station name list with UP/DOWN

button and press OK button.

If you want to delete a station name, select "----".

If you can't find the desired name in the list, you can enter your

own.

To do so, move the cursor to the right and press OK button. Using

the UP/DOWN button, select the desired letter, number or blank.

Press the RIGHT button to select the next position.

Press the OK button to complete this procedure.

TO STORE PROGRAMME IN MEMORY

Move the cursor to the right end with the LEFT/RIGHT button.

Select the programme number that you want to store current dis-

playing programme with station name and system in memory

using the UP/DOWN button or NUMBER 0..9.

Press the OK button.

MANUAL CHANNEL SETTING

PRESET

P01 P

SEARCH UHF >>

PRESET

P01 P

FINE TUNE UHF >>

PRESET

P01 P

PRESET

P01 BBC1 P

PRESET

P01 BBC1 P02

- - - -

DRFS

BBC1

BBC2

ITU

CH4

DAILY USE

The set has a total of 70 programme numbers, 0..69.

The NUMBER button 0..9 are used for direct programme selection.

In order to select two-digit programm, press the second numbered button

within two seconds.

Switch through the programme number step by step with the UP/DOWN

button.

SELECTING A PROGRAMME NUMBER

VOLUME CONTROL

Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the

front of the set, or with the LEFT/RIGHT button on the remote control.

MUTE

Pressing the MUTE button ( ) once turns the sound off.

The sound returns if the button is pressed once more or the programme

no. is changed.

NORMAL PICTURE SELECTION

When you press the NORMAL button repeatedly you can call up three pic-

ture settings;

for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE

(adjustable picture).

PICTURE CONTROL

Press the MENU button to call up the MAIN MENU.

Press the OK button to call up the PICTURE MENU.

You can select each function with the UP/DOWN buttons.

Use the LEFT/RIGHT button adjust each function:

BRIGHTNESS( )-CONTRAST( )-COLOUR( )

-SHARPNESS( )-TINT( ).

* The TINT is active only in NTSC system.

The last set value is automatically stored in FAVOURITE mode.

Note that if you set the brightness and contrast values too low, the On-

screen-display become dark.

SOUND CONTROL

Press the MENU button to call up the MAIN MENU.

Press the OK button on the SOUND line.

Select the required function by moving the cursor with the DOWN or UP

button. Use the LEFT or RIGHT button to adjust the level of each function.

1. BASS

Used to increase or decrease the bass of sound.

2. TREBLE

Used to increase or decrease the treble of sound.

3. BALANCE

Adjust the balance for the best stereo effect for your room conditions.

4. PSEUDO

Used to obtain a pseudo stereo effect with mono transmissions.

VOLUME, PICTURE AND SOUND CONTROL

PICTURE

SOUND

The MODE button is used to change the sound mode. During a stereo

transmission, pression the button will change from stereo to mono.

Pressing this button again will change it back to stereo.

During a bilingual programme transmission, pressing the MODE button will

change the language to the sound channel. Pressing again will change it

back to the main channel.

There may be case of stereo broadcasts where excessive noise will be

heard due to weak incoming signal. You may be able to eliminate this noise

by selecting the MONO mode.

MODE

TIMER

CLOCK 12:20

WAKE UP TIME --:--

ACTIVATE YES

WAKE UP PROG P 45

TIMER

CLOCK 12:20

WAKE UP TIME 7:00

ACTIVATE YES

WAKE UP PROG P 45

In the MAIN MENU, Select TIMER menu.

SETTING THE CLOCK

Press the button on the CLOCK line.

Set the hours and minutes with the NUMBER button 0..9 Press the OK but-

ton to complete. The clock will start.

Note that if you turn the TV off with MAIN POWER button, the clock setting

is lost and must be reset if necessary.

SETTING THE WAKE UP TIME

Set WAKE UP TIME in a same way to the above for CLOCK.

Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button.

When ACTIVATE is "YES", the function is enabled.

Set WAKE UP PROG using the NUMBER button 0..9 or UP/DOWN button.

When WAKE UP TIME is operate, the set will switch on to this programme

number.

TIMER

By pressing the SLEEP button repeatedly, you can select one of the follow-

ing setting:

0->30min. ->60min. ->90min. ->120min. ->0

The set will turn off after time you select.

Automatic Switch-Off in No broadcast Signal

If a broadcasting signal is not present for about 5-30 minutes, the set will be

automatcally turned off.

In AV mode, however, this function dose not operate.

SLEEP

The RECALL button is used to diaplay the current status: programme num-

ber, station name and clock.

This display appear for 5 seconds unless any button is pressed.

RECALL

You can prevent the use of the TV set without the remote control.

The set is child-locked after switching off the set by pressing the Y, C, TELE-

TEXT( ), POWER button ( ) in sequence on the remote control within 5

seconds. The child-lock function is indicated by flashing the STAND-BY

INDICATOR. The set can only be switched back on using the remote con-

trol.

CHILD LOCK

Pressing the TIME button, the current time is displayed on the screen dur-

ing 5 seconds. If the programme you are watching has no Teletext transmis-

sion, no time will be displayed.

TIME

TELETEXT

SWITCHING TELETEXT ON/OFF

Press the TELETEXT button ( ). The index page viewed last

will appear.

Press the TELETEXT button to return to the TV mode.

COLOUR BUTTONS IN TOP/FLOF TELETEXT

A red, green, yellow and blue field is shown at the bottom of

the screen.

If TOP or FLOF teletext (FASTEXT) is transmitted by the sta-

tion, pressing the corresponding colour button on the remote

controller, you can select the desired page easily.

SELECTING PAGES

The NUMBER button 0..9 are used to enter a page number.

The selected page number appears at the top of the screen

and the page appears after a short time.

The UP/DOWN buttons increase or decrease the current page

number by 1.

INDEX PAGE

You can switch directly to the programme preview (with TOP

text) or the overview page of the station you are currently view-

ing by pressing the INDEX ( ) button.

PAGE HOLD

Several sub pages can be combined under a page number

and are scrolled at an interval determined by the television sta-

tion.

The presence of sub pages is indicated by, for exemple, 3/6

beneath the time, which means that you are looking at the 3rd

page of a total of 6 pages.

If you want to look at a subpage for a longer period of time,

press the HOLD ( ) button.

The contents of the subpage shown are kept on the screen

and no longer updated or switched to other subpages.

Pressing the HOLD button again, the current subpage appear.

CALLING UP SUBPAGE DIRECTLY

Pressing the SUBPAGE ( ) button, "Page no./--"

appears at the bottom of the screen.

Enter the subpage number that you want to call up with the

NUMBER button 0..9, for example, the 2nd page, sequence

0002. The desired subpage is sought and displayed. To exit,

press SUBPAGE ( ) button again.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de Daewoo

Daewoo

Daewoo DTQ-14U1FS/20U1FS Manual de usuario

Daewoo

Daewoo DTQ-21U6SC Manual de usuario

Daewoo

Daewoo DTH-21S7NAV Manual de usuario

Daewoo

Daewoo DTQ 13P2FC Manual de usuario

Daewoo

Daewoo DTL-2950 Manual de usuario

Daewoo

Daewoo DTC-14D9T Manual de usuario

Daewoo

Daewoo DTQ-14N2FC Manual de usuario

Daewoo

Daewoo DTX-21G2 Manual de usuario

Daewoo

Daewoo CM25101S Manual de usuario

Daewoo

Daewoo DTL-2950K Manual de usuario

Daewoo

Daewoo DTQ-29M2FS Manual de usuario

Daewoo

Daewoo DTQ-14P2FCM Manual de usuario

Daewoo

Daewoo DTP-14V1TF Manual de usuario

Daewoo

Daewoo DTQ-13V6FCB Manual de usuario

Daewoo

Daewoo DTM-2930MP Manual de usuario

Daewoo

Daewoo DTD-29U8ME Manual de usuario

Daewoo

Daewoo DTQ-14D4SSFM Manual de usuario

Daewoo

Daewoo DTH-28 Guía del usuario

Daewoo

Daewoo DTA-20 T1 Manual de usuario

Daewoo

Daewoo DTH-2066FS Manual de usuario

Daewoo

Daewoo D50DM54UAMS Manual de usuario

Daewoo

Daewoo DTQ-14V1FC Manual de usuario

Daewoo

Daewoo TVZ 1341X Manual de usuario

Daewoo

Daewoo DTU-14XX ME Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario