Dürkopp Adler 767 - Manual de usuario

767

Spezialnähmaschine

Aufstellanleitung

Installation instructions

Instructions d’installation

Instrucciones de instalación

Instruções de montagem

Istruzioni per il montaggio

Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 5 21 / 9 25- 00 • Telefax +49 (0) 5 21 / 9 25 24 35 • www.duerkopp-adler.com

Ausg./Edition: 04/2005 Printed in Federal Republic of Germany Teile-Nr.: 0791 767742

Contents page:

Part 2: Cl. 767 Installation instructions

1. Items delivered ................................. 3

2. Setting up

2.1 Erecting the upper part ............................. 5

2.2 Transport..................................... 5

2.3 V-belttension .................................. 5

2.4 Reelstand.................................... 7

2.5 Workingheight.................................. 7

2.6 Kneelever.................................... 7

3. Electrical connection

3.1 Ratedvoltage.................................. 8

3.2 Checkingdirectionofmotorrotation..................... 8

3.3 Checkingpositioning.............................. 9

4. Pneumatic connection ............................ 10

5. Filling with oil

5.1 Regulation of hook lubrication ........................ 12

5.2 Lubricating wicks and felt ........................... 13

6. Sewing test ................................... 14

1. Items supplied

Which items are supplied depends on your order. Please check that all the required

components are present before beginning setting-up work.

–Basic machine with one or two needles, with or without thread clipper and with or

without edge cutter.

–frame, drive, reel stand, maintenance unit

–knee lever, lamp

–optional equipment

–pack of minor components

12 3

78 9

2. Setting up

IMPORTANT !

The special sewing machine may only be set up by trained

specialist personnel.

Packing must be removed prior to setting-up.

–Remove safety bands and wood from upper part, table and frame.

–Remove safety bands and block from motor.

2.1 Erecting the upper part

If the special sewing machine was not delivered fully assembled:

–Screw hinges 2 and 3 to base plate.

Attach upper-part support 1.

–Fit upper part.

–Fit and tension V-belt (see section 2.3).

–Fit belt guard and oil bath.

–Align surge container 9.

The surge container must be turned so that it is vertical when the upper part of the

machine is vertical.

–Place oil-recirculation felt 7 in the depression of the oil bath.

The hose 8 must not make contact with moving parts.

2.2 Transport

For internal transport the sewing machine must be lifted and moved by a suitable

vehicle (e.g. a fork-lift).

2.3 V-belt tension

After the machine has been moved the pre-set V-belt tension must be checked.

The tension in the V-belt 6 must be such that it can be depressed by about 10 mm by

applying finger pressure in the middle.

–Loosen nuts 4 and 5.

–Swivel drive until V-belt tension is correct.

–Retighten nuts 4 and 5.

456 7

2.4 Reel stand

The structure and position of the reel stand 1 can be seen in the illustration.

–Fit reel stand 1 and secure it with nuts 2 and washers 3.

–Fit reel-stand holder and take-up arms.

The reel-stand holder and take-up arms must be vertically in line.

2.5 Working height

Working height is adjustable between 750 and 900 mm. It is pre-set at 790 mm prior to

delivery.

–Loosen screw 4 on both sides of the frame.

–Place the machine at the desired working height and ensure that it is level.

–Retighten screw 4 on both sides of the frame.

The shift linkage 6 between the pedal and the motor-control cabinet must be adjusted in

line with the working height.

–Loosen screw 7.

–Adjust pedal 5.

Operatives must be able to move the pedal freely forwards and backwards.

–Retighten screw 7.

2.6 Knee lever

The knee lever is used to raise the sewing feet mechanically.

–Fit knee lever with hinges into hollow shaft 8 and engage.

3. Electrical connection

IMPORTANT !

All work on the electrical equipment of this special sewing

machine may only be carried out by qualified electricians or

other appropriately trained persons.

The mains plug must be removed.

3.1 Rated voltage

IMPORTANT !

The mains voltage must coincide with the rated voltage

specified on the model-identification plate.

3.2 Checking the direction of rotation of the motor

IMPORTANT !

Before the special sewing machine is started it is essential

to check the direction of rotation of the motor.

Switching it on can cause damage if the direction of rotation

is incorrect.

The arrow indicates the correct direction of rotation.

–With 3-phase drives the direction of rotation is determined by the rotatory field.

If the direction of rotation is incorrect, check whether the power supply generates a

clockwise-rotating field. If it is, 2 phases in the connecting plug must be reversed.

–With DC drives the direction of rotation is set at the operating panel.

If the direction of rotation is incorrect it must be reversed at the operating panel.

Otros manuales para 767 -

Tabla de contenidos

Otros manuales de Máquina de coser de Dürkopp Adler

Dürkopp Adler

Dürkopp Adler 195 Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 567 CLASSIC Manual de usuario

Dürkopp Adler

Dürkopp Adler 513 Manual de usuario

Dürkopp Adler

Dürkopp Adler 550-867 Manual de usuario

Dürkopp Adler

Dürkopp Adler D669 Manual de usuario

Dürkopp Adler

Dürkopp Adler 667 PREMIUM Manual de usuario

Dürkopp Adler

Dürkopp Adler 888 Manual de usuario

Dürkopp Adler

Dürkopp Adler D869 e-con Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 884-xxx-M series Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler D867 e-con Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 967 Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler DAC classic 271 Manual de usuario

Dürkopp Adler

Dürkopp Adler M-TYPE 667 Manual de usuario

Dürkopp Adler

Dürkopp Adler 867 Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 650-16 Manual de usuario

Dürkopp Adler

Dürkopp Adler 867-M Premium Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 868 Manual de usuario

Dürkopp Adler

Dürkopp Adler 550-D800 Manual de usuario

Dürkopp Adler

Dürkopp Adler 878-M PREMIUM Manual de usuario

Dürkopp Adler

Dürkopp Adler 567 CLASSIC Manual de usuario

Dürkopp Adler

Dürkopp Adler 204 Manual de usuario

Dürkopp Adler

Dürkopp Adler 52Xi Instrucciones de funcionamiento

Dürkopp Adler

Dürkopp Adler 512 Manual de usuario

Dürkopp Adler

Dürkopp Adler M-Type 869 Manual de usuario

Manuales populares de Máquina de coser de otras marcas

Riccar

Riccar RL634DE Manual de usuario

Singer

Singer 2517 Manual de usuario

Pfaff

Pfaff 3307-1 SERIES Manual de usuario

Janome

Janome Quilt Maker Pro 18 VERSA Manual de usuario

Siruba

Siruba C007JP Manual de usuario

Husqvarna Viking

Husqvarna Viking Designer SE Manual de usuario

Singer

Singer 148-5 Manual de usuario

IKEA

IKEA SY Manual de usuario

Pfaff

Pfaff 571 Manual de usuario

Singer

Singer 15-91 Manual de usuario

Brother

Brother BB370 Manual de usuario

Pegasus

Pegasus WT100 Series Manual de usuario

Reliable

Reliable 7100DB Manual de usuario

Pfaff

Pfaff 937 Manual de usuario

Singer

Singer 6038 Manual de usuario

Singer

Singer 413K Manual de usuario

Pfaff

Pfaff 1471 E1 Manual de usuario

Kenmore

Kenmore 16677 - Serger Sewing Machine Manual de usuario