D-Link DAP-3662 Manual de usuario

This document will guide you through the

basic installation process for your new

D-Link Dual Band Outdoor Access Point

Building Networks for People

DAP-3662

Documentation also available

via the D-Link Website

Quick Installation Guide

Wireless AC1200

Concurrent Dual Band Outdoor PoE Access Point

Quick Installation Guide

Краткое руководство по установке

Guía de Instalación Rápida

Guia de Instalação Rápida

快速安裝指南

Petunjuk Pemasangan Cepat

クイックインストールガイド

D-Link DAP-3662 Quick Install Guide

ENGLISH

Important Information

This product should ONLY be installed by

an experienced installer who is familiar with

local building and safety codes and, where

applicable, is licensed by the appropriate

authorities. Failure to employ an experienced

installer may render the D-Link product

warranty void and may also expose the end

user or the service provider to legal and

nancial liabilities. D-Link and its resellers or

distributors expressly disclaim any and all

liabilities for injury, damage, or violation of

regulations due to the improper installation of

outdoor units or antennas.

A safety grounding system is necessary

to protect your outdoor installation from

lightning strikes and the build-up of static

electricity. Direct grounding of an outdoor AP is

very important and can protect your networks

from brutal outdoor environments and

devastating ESD attacks. The grounding system

must comply with the National Electrical Code

and safety standards that apply in your country

and/or region. Always check with a qualied

electrician if you are in doubt as to whether

your outdoor installation is properly grounded.

Quick Install Guide

This installation guide provides basic

instructions for installing the DAP-3662Wireless

AC1200 Concurrent Dual Band Outdoor PoE

Access Point on your network. For additional

information about how to use the Access Point,

please see the datasheet and user manual from

the D-Link support website.

Minimum System

Requirements

Computer with Windows, MAC OS, or Linux-

based operating system, and an Ethernet

adapter installed

-Internet Explorer 7.0, Mozilla Firefox®

version 12.0, Safari 4.0, or Chrome 20.0 or

newer

Package Contents

-DAP-3662 Wireless AC1200 Concurrent

Dual Band Outdoor PoE Access Point

-Installation CD-ROM

-Quick Installation Guide

-PoE Injector

-Power Adapter (48 V/ 0.5 A)1

-Mounting kit (Wall/Pole Mount)

-Stainless steel mount base x 1

-Stainless tie back straps x 2

-Wall screw x 4

-Wall plug x4

-Stainless mount screw (hexagonal hole) x1

-Hexagon Socket Spanner

-Two LAN Port Waterproof Enclosure

-Grounding Wire

If any of the above items are missing, please

contact your reseller.

1Using a power supply with a different voltage rating or

PoE injector than the one included with the DAP-3662

will cause damage and void the warranty for this product.

D-Link DAP-3662 Quick Install Guide

ENGLISH

Physical Installation

STEP 1: Connect an Ethernet Cable

to the LAN1 (PoE) Port on the AP.

STEP 2: Mount the AP to a Pole or

Wall

2A: Mounting The DAP-3662 On A

Pole

Secure mount base to the pole with two

stainless tie back strap sets. Ensure that the tie

back is locked securely.

Align the DAP-3662 with the mounting plate

Once aligned, slide the device down so that

the mounting plate securely locks into the

DAP-3662

2B: Mounting The DAP-3662 On A

Wall

Securely mount the base to the wall using

wall plug and wall screw.

Align the DAP-3662 with the mounting plate

D-Link DAP-3662 Quick Install Guide

ENGLISH

Once aligned, slide the device down so that

the mounting plate securely locks into the

DAP-3662

STEP 3: Install Mount Screw to Fix

DAP-3662 On A Mounting (Pole/

Wall Mount base)

Use the included mount screw (hexagonal

hole) to lock the DAP-3662 to the pole/wall

mount

With the included hexagon socket spanner,

tighten the mount screw until the DAP-3662 is

secured.

STEP 4: Connect Grounding Wire

A grounding wire is recommended to protect

your device from lightning strikes and the

buildup of static electricity.

Attach the grounding wire to the DAP-3662 using

the included screw.

Tighten the grounding wire to the DAP-3662 until

it is securely attached.

Attach the other end of the grounding wire to

either the wall or pole mount. Ensure that the

wall or pole mount is connected to an electrical

ground.

D-Link DAP-3662 Quick Install Guide

ENGLISH

STEP 5: Connect the AP to Your

Network

A. Connect the Ethernet cable (connected

to the AP in STEP 1) from the AP to the

“P+DATA OUT” port on the PoE Injector.

B. Connect an Ethernet cable from a router/

switch or PC to the “DATA IN” port on the

PoE Injector.

C. Attach the power adapter to the connector

labeled “POWER IN” on the PoE Injector,

and attach it into an electrical outlet.

Conguration

If you are configuring the AP locally, connect a

PC to the PoE Injector “DATA IN” port using an

Ethernet cable.

A. Assign a static IP address to your PC which

is in the same network segment with the

device. As the default IP address of this

unit is 192.168.0.50, you may choose any

address from 192.168.0.1 to 192.168.0.254,

except 192.168.0.50.

B. Open a web browser and go to

http://192.168.0.50. Enter admin as your

username and leave the password blank to

log into the web UI. Now you can configure

the AP via web UI.

P+DATA OUT

DATA IN

PoE Injector

POWER IN

Router or Switch Computer

LAN1 (PoE)

FCC Statement:

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not

possible.

This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter

except in accordance with FCC multi-transmitter product procedures.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 23 cm between the radiator & your body.

IC Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est

autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not

possible.

Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres

canaux n'est pas possible.

This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter

except in accordance with IC multi-transmitter product procedures.

Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou

transmetteur.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 23 cm between the radiator & your body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non

contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 23 cm de distance entre la source de

rayonnement et votre corps.

This radio transmitter (Model: DAP-3662A1) has been approved by Industry Canada to operate with the antenna types

listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.

Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly

prohibited for use with this device.

Le présent émetteur radio (Model: DAP-3662A1) a été approuvé par Industrie Canada pour fonctionner avec les types

d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type

d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont

strictement interdits pour l'exploitation de l'émetteur.

Antenna list:

Gain (dBi)

Ant. Brand P/N Antenna Type Connector 2.4GHz 5GHz

1 Grand-Tek OA-58-06-03 Embedded Antenna

I-PEX - 6.2

2 Grand-Tek OA-58-05-02 Embedded Antenna

I-PEX - 6.2

3 Grand-Tek OA-24-05-06 Embedded Antenna

I-PEX 6.1 -

4 Grand-Tek OA-24-04-02 Embedded Antenna

I-PEX 4.8 -

Note: The EUT has four antennas.

Otros manuales para DAP-3662

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de D-Link

D-Link

D-Link DAP-1665 Manual de usuario

D-Link

D-Link DAP-2590 - AirPremier N Dual Band PoE Access... Manual de usuario

D-Link

D-Link DAP-3310 Manual de usuario

D-Link

D-Link DAP-1160 Manual de usuario

D-Link

D-Link DAP-2610 Manual de usuario

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manual de usuario

D-Link

D-Link DAP-3220 Manual de usuario

D-Link

D-Link DIR-505 Manual de usuario

D-Link

D-Link xtreme n duo dap-1522 Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

D-Link

D-Link DAP-2610 Manual de usuario

D-Link

D-Link Air Premier DAP-2695 Manual de usuario

D-Link

D-Link AirPremier N DAP-2310 Manual de usuario

D-Link

D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Manual de usuario

D-Link

D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Manual de usuario

D-Link

D-Link DWL-2130AP - xStack - Wireless Access Point Manual de usuario

D-Link

D-Link DAP-1365 Manual

D-Link

D-Link Air Premier DAP-2695 Manual de usuario

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Manual de usuario

D-Link

D-Link AirPremier N DAP-2360 Manual de usuario

D-Link

D-Link AMPLIFI DAP-1525 Manual de usuario

D-Link

D-Link AirPremier DAP-2553 Manual de usuario

D-Link

D-Link DAP-2620 Manual de usuario

D-Link

D-Link DAP-1513 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario