D-Link AirPro DWL-5000AP Manual de usuario

Note: The installation screenshots were taken in Windows XP. For other OS, the

installation procedure will be exactly the same but the screenshots will differ.

Contents of Package:

• DWL-5000AP Access Point

• Power Supply – 5V DC, 2.5A*

• Manual on CD

• Printed Quick Installation Guide

• Console Cable

• Power Cable

*Using a power supply with a different voltage rating will

damage and void the warranty for this product. If any of the

above items are missing, please contact your reseller.

System Requirements:

• Internet Explorer or Netscape Navigator version 4 and higher with Java

Script enabled.

• Computer with Windows; Macintosh; or Linux-based operating system with

an installed Ethernet adapter.

• Connect the power supply to the power cable.

• Connect the power supply to the DWL-5000AP.

• Connect the power cable to an electrical outlet.

• Connect an Ethernet cable (cross-over) to the Ethernet port of the DWL-

5000AP.

• Connect the other end of the Ethernet cable to the computer with the

installed Ethernet adapter.

• Turn your computer on. The Ethernet LED being on will indicate the

connection to the computer.

Connecting DWL-5000AP

• Go to Start > My Network

Places > Right-click.

• Select Properties

• Right-click on the Local Area

Connection for the Ethernet

adapter.

• Select Properties

Note: The computer used to configure the

DWL-5000AP will need an IP address in

the same range and subnet as the DWL-

5000AP. The DWL-5000AP has a default

IP address of 192.168.0.50 and subnet of

255.255.255.0

• In the Local Area Connection

Properties, select Internet Protocol

(TCP/IP).

• Select Properties

Configuring Ethernet Adapter Settings

• In the General Tab, select Use the

following IP address:

• In the IP Address, enter in the

following IP address: 192.168.0.2.

Note: The IP address entered must

NOT be the same IP address assigned

to any other device in the network.

The IP address must follow the

192.168.0.x IP address format

• Under Subnet mask, input the

following address: 255.255.255.0

• Click OK to accept settings

Open a web browser and type in http://192.168.0.50. Be sure to use Internet Explorer

or Netscape Navigator version 4 and above.

• When the login screen appears, type

in the User Name and Password to

access the Web Configuration

Utility.

• By default the User Name is Admin

(case sensitive) and Password is

blank.

• Click OK

Configuring the DWL-5000AP

The DWL-5000AP will work out of the box with D-Link AirPro DWL-A520 and DWL-

A650 using the default factory settings.

• The default factory settings can be modified in the Configuration menu.

• The default settings for the DWL-5000AP are the following:

SSID: default

The SSID on the wireless network

adapters must be the same in order

to communicate with the DWL-

5000AP

Turbo: Off

If the Turbo mode is enabled on the

DWL-5000AP, then Turbo mode

must also be enabled on the wireless

adapters.

Enable Encryption: Disabled

To enable Encryption, check this box

and enter in the Encryption key.

Note: If Encryption is enabled on the

DWL-5000AP, then the Encryption

on wireless adapters must also be

enabled.

Enter the Encryption Key using the

following guideline.

The following are the options:

64-bit - 10 hex digits (A-F; 0-9)

128-bit - 26 hex digits (A-F; 0-9)

152-bit - 32 hex digits (A-F; 0-9)

default

• By clicking on Configuration > Advanced button, users can modify

Advanced features of the DWL-5000AP.

Data Rate: best

Recommended to keep Data Rate at

best for highest wireless connection.

Transmit Power: full

Users can adjust the Transmit Power

settings to limit the area of wireless

coverage (i.e. a room).

• Click on Configuration tab >

Per Station Privacy.

• Select Enable in the ACL

selection. In the ACL Type,

select one of the following

options: Allow, Deny, Strict.

For more information on the

ACL Type, click on the help

button.

• Click on Add

Advanced Configuration – Using the

Access Control List

(

ACL

)

for Securit

Advanced Configuration – Adjusting

Transmit Power Level

• In the MAC Address box,

enter in the 802.11a

Network Adapter’s MAC

address.

• When all the information

has been filled, click on

Add to List to allow

wireless access to the

provisioned wireless

network adapters.

• If any changes are made in

the Configuration menu, be

sure to click Update to save

changes.

Note: Any changes in the settings will not take effect until the unit is restarted.

Your wireless connection setup is now complete!

Please remember to change back the network settings for the computer used to

configure the DWL-5000AP.

Appendix

To reset the D-Link AirPro DWL-5000AP unit

• To do a hard-reset on the D-Link AirPro DWL-5000AP, please follow

these steps.

1. On the back of the DWL-5000AP, locate the reset button.

2. Use a paper clip to press the reset button.

3. Hold for about 5 seconds and release.

4. After the unit reboots, the DWL-5000AP will reset.

The most recent software and documentation are available on the D-Link website.

D-Link provides free technical support for customers within the United States during

the warranty period on this product.

U.S. customers can contact D-Link Technical Support through our web site, or by

phone.

D-Link Technical Support over Telephone:

(877) 453-5465

24 hours a day, seven days a week.

D-Link Technical Support over the Internet:

http://support.dlink.com

Building Networks for People

Technical Support

Otros manuales para AirPro DWL-5000AP

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de D-Link

D-Link

D-Link D DWL-8200AP DWL-8200AP Manual de usuario

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Manual de usuario

D-Link

D-Link DWL-3500AP Manual de servicio

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

D-Link

D-Link DAP-1533 Manual de usuario

D-Link

D-Link NUCLIAS CONNECT DAP-X2850 Manual de usuario

D-Link

D-Link DWL-8720AP Manual de usuario

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Manual de usuario

D-Link

D-Link DBA-1210P Manual de usuario

D-Link

D-Link AirPremier DWL-00AP Manual de usuario

D-Link

D-Link DWL-6610AP Manual de usuario

D-Link

D-Link AirPremier N DAP-2360 Manual de usuario

D-Link

D-Link DWL-6610AP Manual de usuario

D-Link

D-Link DWL-3140AP - Web Smart PoE Thin Access Point Manual de usuario

D-Link

D-Link AirPremier N DAP-3690 Manual de usuario

D-Link

D-Link DAP-1360L Manual de usuario

D-Link

D-Link AirPremier N DAP-2690 Manual de usuario

D-Link

D-Link AMPLIFI DAP-1525 Manual de usuario

D-Link

D-Link DAP-3666 Manual de usuario

D-Link

D-Link DAP-1160 Manual de usuario

D-Link

D-Link DHP-W306AV Manual de usuario

D-Link

D-Link DVA-G3670B Manual de usuario

D-Link

D-Link DWL-8710AP Manual de usuario

D-Link

D-Link AirPremier N DAP-2310 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario