D-Link DPR-2000 Manual de usuario

WIRELESS G

USB MULTIFUNCTION PRINT SERVER

Quick Install Guide+

Руководство по быстрой установке+

Guía de instalación rápida+

Guia de instalação rápida+

快速安裝手冊+

Petunjuk Pemasangan Cepat+

DPR-2000

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 7.0

5V DC, 3A Power

Adapter

Before You Begin

Check Your Package Contents

DPR-2000 USB Multi-Function Print Server

CD-ROM (Software, Manual and Warranty)

Ethernet (CAT5 UTP) Cable

If any of the above items are missing, please contact your reseller.

This Quick Installation Guide provides you with step-by-step instructions to set up

your MFP Server and start your printing tasks. The model you have purchased may

be slightly different from those seen in the illustrations. For more detailed information

regarding the Print Server, please refer to the User’s Manual that is included in your

installation CD.

NOTE: The images and setting values in this manual are FOR YOUR REFERENCE ONLY.

The actual settings and values depend on your Print Server, system and network.

Using a power supply

with a differe n t

voltage rating will damage

this product and void its

warranty.

DPR-2000

Wireless G USB

Multifunction Print Server

holders. Software and specications subject to change without notice.

EXTERNAL FEATURES

Physical Interfaces

USB Ports

Ethernet Port (LAN)

DC Power Connector

Reset Button (Bottom Panel)

The DPR-2000’s USB ports are located on the rear panel. The port can be congured

using the web congurator which allows users to congure settings through their

web browser.

The default IP address of the DPR-2000 is automatically acquired from a DHCP

server on the network. If a DHCP server cannot be found the default IP address for

the DPR-2000 will be 192.168.0.10.

NOTE : The PC’s IP address must be in the same subnet as the Print Server’s IP

address for the two devices to communicate. (For example, if the Print

server’s IP address is 192.168.0.10, with a subnet mask of 255.255.255.0,

then your computer’s IP address should be 192.168.0.x, where x is a value

between 1-254, excluding 10.)

The Print Server’s rear panel features an RJ-45 port for the connection of a

10/100Mbps CAT 5 Ethernet cable. The port supports the NWay protocol, allowing

the Print Server to automatically detect or negotiate the transmission speed of the

network.

The DC power input connector is located on the Print Server’s rear panel and is

labeled DC 5V.

Press and release this button to reset the MFP Server. To restore the device to

factory default settings , press and hold the button for three seconds until the USB

LED on the front panel lights up and then release the button.

USB Ports

DC Power Connector

LAN Ethernet Port

LED INDICATORS

Power

USB

Link/Act

The top panel of the Print Server features four LED indicators:

A steady blue light conrms that the Print Server is turned ON.

A steady blue light indicates the printer is online and successfully connected to

the print server. This light will also blink to indicate that data is being transferred

between the print server and printer.

A steady blue light conrms that the Print Server has a connection to an Ethernet

network. This light will also blink when receiving or transmitting data on the

network.

These four LED indicators are also used during the device’s power-on self test to

indicate any hardware failures. Please refer to the User Manual for more information

about this test.

A steady blue light conrms that the Print Server has a connection to a wireless

network. This light will also blink when receiving or transmitting data on the

network.

Wireless Link/Act

HARDWARE INSTALLATION

WARNING: There may be conguration problems if the Print Server is turned on

without rst establishing a network connection.

Follow the steps below to avoid any complications during the hardware

installation:

1. Conrm that the printer you will use to connect to the DPR-2000 is operating

correctly.

2. When you have conrmed that the printer is operating correctly, switch its power

OFF.

3. Conrm that your network is operating normally.

4. Using a CAT 5 Ethernet cable, connect the DPR-2000 Ethernet Port (labelled

LAN) to the network.

5. While the printer is turned OFF, connect the USB printer cable to the printer and

then to the USB port on the Print Server.

6. Switch on the printer.

7. Insert the power adapter’s output plug into the DC 5V power socket on the rear

panel of the Print Server.

8. Connect the other end of the power adapter into an AC power outlet. This will

supply power to the DPR-2000. The blue LED on the DPR-2000’s front panel

should turn ON and this Print Server’s self-test will proceed.

PS SOFTWARE INSTALLATION

PS Software (Windows Vista/XP/2003/2000) includes both PS-Link and PS-

Wizard. PSLink can help you set up your printer for multi-function printing using

your manufacturer’s drivers. PS-Wizard is a utility that enables you to easily add a

printer to your computer.

These utilities can also congure additional Print Server settings. Please refer to the

user’s manual for more information.

To install PS Software, insert the included installation CD into your computer’s CD-

ROM drive to initiate the auto-run program.

NOTE: If auto-run does not start you can access the CD-ROM contents in Windows

by clicking My Computer > [CD-ROM Drive Letter].

Installation

The content of the Installation CD-ROM includes:

• Install PS Software – click this to install the PS Software, which contains PS-Link

and PS-Wizard.

• View QIG – click this to see the Quick Installation Guide in PDF format for step-

by-step instructions of the print server Installation.

• View Manual – click this to see the User Manual in PDF format for more detailed

information regarding the print server.

• Adobe Reader – click this to install Acrobat Reader onto your computer. This

enables you to view the manual and Quick Installation Guide in PDF format.

• Exit – click to close the Auto-Run program.

PS SOFTWARE INSTALLATION

After clicking Install PS Software

the following screen will appear.

To change the default installation

location, click Browse.

In this screen you can change the

name of the installation folder. The

default name is PS Software.

Click Next

PS SOFTWARE INSTALLATION

To nish the installation of the PS

Software, click Finish.

To access the utilities, click Start >

Programs > PS Software and select

the utility you wish to use.

Click Finish

Technical Support

You can nd software updates and user documentation on the D-Link website.

Tech Support for customers in

Australia:

Tel: 1300-766-868

24/7(24Hrs, 7days a week) technical support

http://www.dlink.com.au

e-mail: [email protected]

India:

Customer Support: - 1800-233-0000 (MTNL & BSNL Toll Free) or

+91-832-2885700 (GSM, CDMS & Others)

E-Mail Address: - [email protected], [email protected]

Website: - www.dlink.co.in

Indonesia, Malaysia, Singapore and Thailand:

Tel: +62-21-5731610 (Indonesia)

Tel: 1800-882-880 (Malaysia)

Tel: +65 6501 4200 (Singapore)

Tel: +66-2-719-8978/9 (Thailand)

24/7, for English Support Only

http://www.dlink.com.sg/support/

e-mail: [email protected]

Korea:

Tel: +82-2-2028-1815

Monday to Friday 9:00am to 6:00pm

http://www.d-link.co.kr

e-mail: [email protected]

New Zealand:

Tel: 0800-900-900

24/7(24Hrs, 7days a week) technical support

http://www.dlink.co.nz

e-mail: [email protected]

Technical Support

You can nd software updates and user documentation on the D-Link website.

Tech Support for customers in

Egypt:

Tel: +202-2919035 or +202-2919047

Sunday to Thursday 9:00am to 5:00pm

http://support.dlink-me.com

Email: [email protected]

Iran:

Te: +98-21-88880918,19

Saturday to Thursday 9:00am to 5:00pm

http://support.dlink-me.com

Email : [email protected] & [email protected]

Israel:

Magshimim 20, Petach Tikva 49348

Website: www.dlink.co.il

Main Tel: 972-3-9215173

Customer Support Tel: 972-3-9212886

Pakistan:

Tel: +92-21-4548158 or +92-21-4548310

Monday to Friday 10:00am to 6:00pm

http://support.dlink-me.com

E-mail: [email protected]

South Africa and Sub Sahara Region:

Tel: +27-12-665-2165

08600 DLINK (for South Africa only)

Monday to Friday 8:30am to 9:00pm South Africa Time

http://www.d-link.co.za

Turkey:

Tel: +90-212-2895659

Monday to Friday 9:00am to 6:00pm

http://www.dlink.com.tr

e-mail: [email protected]

U.A.E and North Africa:

Tel: +971-4-4278127 (U.A.E)

Sunday to Thursday 9.00AM to 6.00PM GMT+4

Web: http://www.dlink-me.com

E-mail: [email protected]

Saudi ARABIA (KSA):

Telephone : +966 01 217 0008

Facsimile : +966 01 217 0009

e-mail: [email protected]

Saturday to Wednesday 9.30AM to 6.30PM

Thursdays 9.30AM to 2.00 PM

Otros manuales para DPR-2000

Tabla de contenidos

Idiomas:

Otros manuales de Servidor de impresión de D-Link

D-Link

D-Link AirPlus G DP-G310 Manual de usuario

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Manual de usuario

D-Link

D-Link DP 301U Manual de usuario

D-Link

D-Link DP-300U Manual de usuario

D-Link

D-Link DPR-1020 Manual de usuario

D-Link

D-Link AirPlus DP-G310 Manual de usuario

D-Link

D-Link AirPlus DP-G321 Manual de usuario

D-Link

D-Link DP-100 Manual de instalación

D-Link

D-Link DP-303 Manual de instalación

D-Link

D-Link DP-301 Instrucciones de instalación

D-Link

D-Link AirPlus DP-G310 Manual de usuario

D-Link

D-Link DP-300+ Manual de usuario

D-Link

D-Link AirPlus DP-G310 Manual de usuario

D-Link

D-Link DP-311U Manual de usuario

D-Link

D-Link DP-101P+ Manual de usuario

D-Link

D-Link AirPlus DP-G321 Manual de usuario

D-Link

D-Link DPR-1061 Manual de usuario

D-Link

D-Link AirPlus DP-G310 Manual de usuario

D-Link

D-Link DP 301U Manual del operador

D-Link

D-Link DPR-1020 Manual de usuario

D-Link

D-Link DP 301U Manual de usuario

D-Link

D-Link DPR-2000 Manual de usuario

D-Link

D-Link Epress EtherNetwork DP-301P+ Manual de usuario

D-Link

D-Link DP 301U Manual de usuario

Manuales populares de Servidor de impresión de otras marcas

Digitus

Digitus DN-13003-1 Manual de usuario

Edimax

Edimax PS-1206PWg Manual de usuario

Intellinet

Intellinet 509077 Manual de usuario

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Zonet

Zonet ZPS1000 Manual de usuario

TRENDnet

TRENDnet TEW-P11G Manual de usuario

Axis

Axis 140 BJC Manual de usuario

HP Jetdirect 280m - 802.11b Wireless Print... Manual de usuario

MicroNet

MicroNet SP766W Manual de usuario

NETGEAR

NETGEAR PS104 - Hub - EN Manual de usuario

Axis

Axis AXIS 1610 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Axis

Axis 5600+ Manual de usuario

LevelOne

LevelOne WPS-9123 Manual de usuario

NETGEAR

NETGEAR PS105 Manual de usuario

Xerox

Xerox FreeFlow Print Server V9 SP3 Manual de usuario

SEH

SEH primos Manual de usuario