D-Link DSL-302G Manual de usuario

This product can be set up

using any current web

browser, i.e., Internet Explorer,

Netscape Navigator.

DSL-302G

ADSL USB/Ethernet

Modem

9V DC, 1A Power Adapter

specifications subject to change without notice. DSL-302G.09232002

Read This First!

Check Your Package Contents

DSL-302G ADSL USB/Ethernet Modem

CD-ROM (containing Manual, Drivers and

Warranty)

Ethernet (CAT5 UTP) Cable (blue)

Using a powe

supply with a

different voltage rating

will damage and void

the warranty for this

product.

If any of the above items are missing, please contact your reseller.

This Quick Installation Guide introduces you to your new DSL modem and walks you

step-by-step through the process of installing the modem on your computer. Please make

sure to follow each step carefully. For more detailed information on the functions and

features of the DSL modem, please refer to the User’s Manual located on the included

CD-ROM.

RJ-11 Telephone Cord (black)

USB Cable (transparent)

Device Feet (one pair)

Before continuing, you will need to know the VPI/VCI numbers and the

encapsulation method (LLC or VC Mux) used for the ADSL connection. If

you do not know these information, please contact your ISP.

Pre-Installation

This section explains how to physically connect the DSL-302G to your computer. Before

you begin, visually inspect the rear of your computer and make sure it has either a USB

or Ethernet port as shown below. If you are uncertain as to the different type of ports,

please consult the manuals that came with your computer. If your computer does not

have one of the two ports, you need to purchase and install a USB or Ethernet adapter

before proceeding with the installation.

For USB:

• Your computer has a functional USB

port.

• Only for Microsoft Windows

98SE/Me/2K/XP Operating Systems.

For Ethernet:

• Your computer has pre-installed or built-in

Ethernet adapter.

• Can be used for all Operating Systems.

USB Port Ethernet Port

USB Installation (for Windows 98SE/Me/2K/XP)

For USB Installation, please continue to step

For Ethernet Installation, please continue to step

Insert the DSL-302G CD-ROM

into the computer. The following

auto-run screen will appear:

Click on Install Drivers &

Utility

Requirements:

Make sure that your ADSL service is enabled. If you are not sure, please contact your

ISP to verify. Since both ADSL and your telephone service uses the same telephone line

wire, you are susceptible to noise and interference. To eliminate these noise, you must

use a micro-filter with all other telephony devices such as your telephone, fax machine,

and answering machine. Please refer to the Appendix at the end of this guide for more

information.

Enter in a User Name and

Company name.

Click Next

Follow the on-screen

instructions to physically

connect the modem

before moving further.

Make sure both boxes are

checked.

Click Next

After the computer restarts, the USB drivers should now be installed.

Please proceed to step to configure the DSL-302G.

Ethernet Installation (for all Operating Systems)

Connect the DSL-302G to a suitable power source.

Once the unit is powered on, insert one end of the

included Ethernet cable into the Ethernet port, and the

other end into the Ethernet port of the NIC card installed

on your computer. Make sure your computer is turned

on.

Note: If the cable connection is good, a green LED on the front of the device labeled

Ethernet/Link will glow steadily.

Click Finish to reboot

the computer

Now connect the telephone cable to the ADSL port on

the back of the device. Connect the other end of the

cable to the telephone wall jack.

To Power Supply

To Computer

To Phone Jack

Please proceed to step to configure the DSL-302G.

ADSL Configuration

The Configuration Utility allows you to change the VPI/VCI settings of the DSL-302G to

connect to your ISP and also displays ADSL connection information. The DSL-302G

comes with a default VPI of “0” and a VCI of “35”. If your DSL service provider uses

different numbers, change these numbers on the modem to match those of your provider.

If you are unsure of the VPI/VCI numbers, check all documentation provided by your

DSL provider or contact them to get this necessary information. The DSL modem will not

work unless the VPI and VCI numbers exactly match those of your DSL provider. Follow

the steps below to change the VPI/VCI if necessary.

There should be a DSL-300 Family Configuration Utility icon on your desktop. (Alter-

nately, you can go to Start>Programs>D-Link DSL Family>DSL-300 Family Configura-

tion Utility) If it is not installed, please refer back to step 2 to install the Ethernet

Configuration Utility.

Double-Click on the icon.

When the utility is launched, it will

search for any DSL-302G on the

network and display them in the

table. If the modem does not

appear in a few seconds, click the

Discover button.

Note: If the ADSL Link LED does not glow green

within three minutes of it being connected,

check all your cable connections to make sure

they are correct and securely installed.

Click

Double-click on the MAC

address of the DSL-302G or

highlight it and press the Enter

or Return key.

You should now be prompt for

the password. The default

password is “admin”.

Click on the General ADSL

Information tab. The new menu

lists 8 channels available for

configuration. You need to

change settings for only one

channel in order to use the ADSL

modem. Click on the first

channel listed to highlight it, this

is the default channel used by

the modem.

In the new menu screen you must enter new

values for the VPI and VCI settings. You also

must choose the Encapsulation method used

(LLC or VC Mux) from the pull-down menu. Your

service provider will supply this information.

Note: The default settings for the modem are VPI of “0” and a VCI

of “35”. The default encapsulation method used is LLC.

Click Ok

Click Update

Click Set

admin

The modem will save the new

settings and automatically restart.

Note: Do not manually restart the modem. It will automatically restart by itself.

When the DSL-302G has been fully restarted, then it will be ready for use.

Click Ok

Click Yes

You wil be returned to the General

ADSL Information screen.

The power LED, status LED, ADSL LED, and Ethernet or USB LED should now remain

solid green.

Your Setup is Complete!

You have now installed and configured the DSL-302G modem.

Your ISP may require you to install other software such as a PPPoE client. If so, please

do that now.

Your connection may look similar to this:

Appendix

Micro-filters are obtained from your DSL provider and must be installed on

every normal telephone in the house, apartment or office where you are

installing the DSL modem. Micro-filters ensure that the new DSL data signal

and the normal voice signal do not interfere with each other as they travel on

the same telephone line.

Installing Micro-filters

Install a micro-filter on every telephone other than the one used for the DSL

modem. If it’s not a DSL modem, it needs a micro-filter.

Otros manuales para DSL-302G

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Módem de D-Link

D-Link

D-Link DSL-200 Manual de usuario

D-Link

D-Link DCM-712 Manual de usuario

D-Link

D-Link DCF-560M Manual de usuario

D-Link

D-Link DSL-302T Manual de usuario

D-Link

D-Link DU-562M - 56 Kbps Fax Manual de usuario

D-Link

D-Link DSL-520B Manual de usuario

D-Link

D-Link DSL-300T Manual de usuario

D-Link

D-Link DSL-300G Manual de usuario

D-Link

D-Link DSL-200 Manual de usuario

D-Link

D-Link DSL-2740B Guía del usuario

D-Link

D-Link DVA-2800 Manual de usuario

D-Link

D-Link DSL-302G - 8 Mbps DSL Modem Manual de usuario

D-Link

D-Link DSL-520B Manual de usuario

D-Link

D-Link DSL-200 Manual de usuario

D-Link

D-Link DSL-380T Instrucciones de montaje

D-Link

D-Link DSL-2640R Manual de usuario

D-Link

D-Link DSL-504T Manual de usuario

D-Link

D-Link DSL-4320L Manual de usuario

D-Link

D-Link DSL-2320B - 24 Mbps DSL Modem Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

D-Link

D-Link DSL-321B Manual de usuario

D-Link

D-Link DSL-300I - DSL 300 - 8 Mbps Modem Manual de usuario

D-Link

D-Link DWM-311 Manual de usuario

D-Link

D-Link DCF-560M Manual del propietario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario