D-Link EXPRESS ETHERNETWORK DPH-140S Manual de usuario

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.1

D-LINK DPH-140S

SIP PHONE

INSTALLATION GUIDE

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.2

SUMMARY

SKYPHO VOIP SERVICE....................................................................................................3

DPH-140S PACKAGE CONTENT .......................................................................................3

DEVICE PHYSICAL CONNECTION....................................................................................4

ACCESS TO THE DEVICE..................................................................................................6

Accesso to the IP Phone when the DHCP is working ..........................................................6

Access to the IP Phone when the DHCP service is not working..........................................7

WEB BROWSER CONFIGURATION ..................................................................................9

LAN Parameters ..................................................................................................................9

VoIP Parameters ...............................................................................................................10

Configuration saving ..........................................................................................................12

D-LINK DPH-140S IP PHONE CONFIGURATION PARAMETERS ..................................13

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.3

SKYPHO VOIP SERVICE

The use of SKYPHO VoIP (Voice Over IP) service is simple and quick. You need only an Internet access, the DPH-140S

IP Phone and with few “clicks” you could use the new telephone line with the quality equal to the traditional landline.

To use the SKYPHO’s VOIP service, you need:

- One computer with an Ethernet port

- One modem/router with a LAN port

- One Internet access;

- One Username and one Password (account SIP).

The SIP account is the registration made on SKYPHO’s server that allows to the user to access the VoIP services

provided by the server itself. It is composed by a Username, coincident with the telephone number you have been

assigned and a Password (confidential access code) by which you can access the Skypho telephone services.

LOOK OUT! The confidentiality of this data is necessary in order to guarantee that the service will be accessed only by

you. For your major safety, you can choose a new password by accessing on Skypho’s registration site.

DPH-140S PACKAGE CONTENT

One DPH-140S IP Phone

One Ethernet cable (1,8 meters)

One power adapter

One installation CD Rom

IP Phone

DPH-140S

Ethernet cable

Power adapter

Wall Mount Installation CD-ROM

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.4

DEVICE PHYSICAL CONNECTION

First of all, you have to make the physical connection of the device, following the simple instructions hereafter included:

 Insert the Ethernet cable in the PC port of the

DPH-140S

 Connect the other end of the cable to the

Ethernet port of your PC

 Connect the power adapter to the wall socket

 Insert the Ethernet cable to the LAN port of your

DPH-140S

 Connect the other end of the cable to your LAN

(Hub/Modem/Router)

Here below you can find the layout for the physical

connection of the device.

Internet

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.5

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.6

ACCESS TO THE DEVICE

Once the connection is completed, you can proceed with the D-LINK DPH-140S configuration.

Verify that on your router the DHCP service is either in Enable status (DHCP allows the network administrator to

distribute IP addresses when a computer is plugged into a different place in the network) or in Disable status

(this means that in your LAN the IP addresses are used in a static way).

Then, follow the suitable configuration instructions.

Accesso to the IP Phone when the DHCP is working

1. verify that the LAN port of your PC is configured in order to obtain an IP address automatically.

Click on “Start \ Settings\ Network

connections“, double click on “Local area

connections (LAN)” .

In the new window, click on “Properties”

and then double click on “Internet Protocol

(TCP/IP)”.

Verify that the option “Obtain an IP address

automatically” is activated or modify the

setting and press “OK” .

At the end, you can close all the opened

windows.

2. press “MENU” on the IP Phone keyboard to assign the IP address to your D-LINK DPH-140S.

You will see “Display Name:” on the IP Phone display: insert the telephone number assigned by Skypho during

registration.

Press the “↓” key, you will see “ADSL DIALUP:” on the IP Phone display, press the “” key to set it on “DISABLE”, if

it is already in this status go to the following step.

Press the “↓” key, you will see “DHCP” on the IP Phone display, press the “” key to set it on “ENABLE”.

Your DPH-140S will make an automatic update of the settings and it will show “DHCP;” again in the “ENABLE”

status.

At this point your Voip configuration is finished, press “MENU” and “OK” to exit the configuration.

Access your router configuration and between the “LAN” or “DHCP Client” information and check which Ip address

has been assigned to your D-LINK DPH-140S and write it down (in the following example the address is

192.168.0.3).

3. open your Web Browser (ie. Internet

Explorer), insert the IP address of your D-

LINK DPH-140S - http://192.168.0.x:9999

(in the example 192.168.0.3) and press GO.

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.7

4. Leave “Username” and “Password” blank

as you are installing the phone for the first

time and press “OK”.

Look out! !The confidentiality of this data

is necessary in order to guarantee that the

equipment configuration is accessible only

by you. We suggest to proceed with the

configuration password change and to

write it down by using the Web Login

Configuration.

5. After few seconds it will appear the “D-link

DPH-140S Voip Phone” page where you

can modify the configuration parameters of

your D-LINK DPH-140S, as indicate in the

following chapter.

LOOK OUT!: The changes are going to be effective only after the saving (“Update”) and restart (“Reboot”) of your IP

Phone, as indicated in this manual.

Access to the IP Phone when the DHCP service is not working

1. configure the static IP address (in the example 192.168.0.2) on the LAN port of your PC.

Click on “Start \ Settings\ Network connections“,

double click on “Local area connections (LAN)” .

In the new window click on “Properties” and then

double click on “Internet Protocol (TCP/IP)”.

Verify that the option “Use the following IP address”

is activated, or modify the setting and fill in the

following fields:

IP Address: 192.168.0.x with x different from “1”

and “3” (the last one is the default IP

we assigned to the Voip Telephone).

For example 192.168.0.2.

Subnet Mask: 255.255.255.0

Gateway predefinito: 192.168.0.1

For DNS servers, it should be used the IP

addresses provided by the Internet Service

Provider.

Once finished the configuration, press “OK” and

close all the opened windows.

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.8

2. configure the static IP address on your IP Phone.

Press “MENU”, use the cursor to go down and digit the telephone number you have been assigned by Skypho on

the “Display Name:”.

Press the “↓” key, it will appear “ADSL DIALUP:”, press the “” key to set it on “DISABLE”, in the case it is in

“ENABLE” status.

Press the “↓” key, it will appear “DHCP”, press “” key to set it on “DISABLE” , in the case it is in “ENABLE”

status.

Press “↓” key, it will appear “IP Address”, digit the IP address that you have chosen (ie. 192.168.000.003).

Press the “↓” key, it will appear “Subnet Mask:”, digit the network connection data (ie. 255.255.255.0).

Press the “↓” key, it will appear “Voip Router:”, digit the default Gateway you will find in the network connection (ie.

192.168.000.001).

Press the “↓”, it will appear “DNS Server IP”, digit the IP addresses provided by the Internet Service Provider.

Press the “↓” key, it will appear “SNTP Server IP:”, insert the IP address 62.94.7.9, press “MENU”, then “OK”.

Your SIP DPH-140S Telephone is ready to make and receive Voip Calls!

3. to complete the settings, from your PC

open your Web Browser (ie. Internet

Explorer), insert the IP address

192.168.0.x:9999 (in the example

192.168.0.3) and press GO.

4. Leave blank the “Username” and

“Password” fields and click on “OK”.

Look out! !The confidentiality of this data

is necessary in order to guarantee that the

equipment configuration is accessible only

by you. We suggest to proceed with the

configuration password change and to

write it down by using the “Basic Settings”

menu (Login Web Configuration).

6. After few seconds it will appear the “D-link

DPH-140S Voip Phone” page where you

can modify the configuration parameters of

your D-LINK DPH-140S, as indicate in the

following chapter.

LOOK OUT!: The changes are going to be effective only after the saving (“Update”) and restart (“Reboot”) of your IP

Phone, as indicated in this manual.

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.9

WEB BROWSER CONFIGURATION

Before proceeding with the configuration of your D-LINK DPH-140S using a Web Browser, it is important that you have at your

disposal the username and password for the VoIP service that you obtained during registration in Skypho.

Access the “Management” menu, create the User Name and Password for accessing the Voip telephone management. If you

don’t want to change the default data, leave blank the User Name and Password fields.

Insert the “62.94.7.9” value in the “NTP Server IP” field, select your “Time Zone” and put “TFTP Server” and ”FTP Client” in

Enable status.

LAN Parameters

1. Verify that the “DHCP” option on the “Network Settings” page of the IP Address has been selected. Insert “62.94.0.1” in

the DNS Server field. Then click on “Submit”

Look out! If in your LAN, the IP addresses are used in a static way, it is necessary to choose “STATIC IP” and insert the “IP

Address, Subnet Mask, Default Router, DNS Server 1 and 2” values in order to avoid conflicts on the network.

SIP PHONE – D-LINK DPH-140S – Installation Guide pag.10

VoIP Parameters

2. Insert your SIP account values that you received from Skypho during registration.

NOTE: The SIP account is the subscription registered on the Skypho’s server that allows to the user to access the VoIP

services provided by the server itself. It is composed by a User name, coincident with the telephone number you have

been assigned and a Password (confidential access code) by which you can access the telephone services of Skypho.

User name and Password will be provided directly by Skypho at the activation of the service.

Display Name = Telephone Number Assigned by SKYPHO

SIP User Name = Telephone Number Assigned by SKYPHO

Authentication User Name = Telephone Number Assigned by SKYPHO

Authentication Password = SIP Account Password assigned by SKYPHO

For the other settings, follow what indicated in the picture. Then click on “Submit”

Otros manuales para EXPRESS ETHERNETWORK DPH-140S

Tabla de contenidos

Otros manuales de Teléfono IP de D-Link

D-Link

D-Link DPH-150SE Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

D-Link

D-Link DPH-100 Manual de usuario

D-Link

D-Link DPH-125MS - VoiceCenter VoIP Phone Manual de usuario

D-Link

D-Link DPH-120S Manual de instrucciones

D-Link

D-Link DPH-150S Manual de usuario

D-Link

D-Link DPH-400G Manual de usuario

D-Link

D-Link DVG-5121SP Manual del propietario

D-Link

D-Link EXPRESS ETHERNETWORK DPH-140S Manual de instrucciones

D-Link

D-Link DWR-920/PW Manual de usuario

D-Link

D-Link DPH-150S Manual de usuario

D-Link

D-Link DPH-128MS - VoiceCenter VoIP Phone Manual de usuario

D-Link

D-Link DPH-100M Manual de usuario

D-Link

D-Link DPH-10U Manual de instrucciones

D-Link

D-Link DPH-150SE Manual de usuario

D-Link

D-Link DPH-120S Manual de usuario

D-Link

D-Link DPH-10U Manual de usuario

D-Link

D-Link DPH-400S Manual de usuario

D-Link

D-Link EXPRESS ETHERNETWORK DPH-140S Manual de usuario

D-Link

D-Link DPH-120SE Manual de usuario

D-Link

D-Link GLV-540 Manual de usuario

D-Link

D-Link DPH-150S Manual de usuario

D-Link

D-Link DPH-150S Manual de usuario

D-Link

D-Link DPH-540 Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario