D-Link DCS-942L Guía de instalación
Contents
1. How do I set up and install my DCS-942L? ...................................................................... 1
2. How do I set an administrator (admin) password on my DCS-942L?............................ 13
3. What do I do if I forget the login username & password of my camera? ..................... 15
4. How do I change the LAN IP address of my camera?.................................................... 15
5. How do I configure motion detection on my camera? ................................................. 18
6. How many types of motion detection are available on my IP camera?........................ 26
7. How do I configure the audio settings (speaker and microphone) on my DCS-942L?.. 28
8. How do I manually upgrade the firmware on my camera?........................................... 30
9. How do I mount my camera to a wall or ceiling?.......................................................... 31
10. What can I do when Active X fails to install during my mydlink camera setup? ....... 33
11. How do I configure Internet Explorer to allow ActiveX Controls?............................. 35
12. How do I access my mydlink camera remotely?........................................................ 37
13. How do I enable a new camera in D-ViewCam?........................................................ 40
14. How do I set up motion detection and recording in D-ViewCam?............................ 45
15. How do I set up scheduled recording in D-ViewCam? .............................................. 49
16. What are the system requirements for D-ViewCam 3.x?.......................................... 52
17. Why can't I see the video from my camera on D-ViewCam? .................................... 53
18. Why there is no sound on D-ViewCam recording playback? .................................... 56
1. How do I set up and install my DCS-942L?
Step 1: Download and the install wizard for your camera from
http://www.mydlink.com/support
Step 2: Launch the install wizard:
•Step 2.1 : Select a language from the drop-down menu and click Start.
•Step 2.2: Accept the End User License Agreement by checking the box next to “I accept
these terms and conditions”, then click Next
•Step 2.3: Follow the on-screen instructions to connect your camera to your router and
connect the power. Click Next after you have completed each step.
Step 4.4: Confirm that the LED on the rear of the camera is lit solid green.
•Step 4.5: Select your DCS-942L using the radio button from the menu on the left-hand side
of the camera name. Enter and confirm a new password for the administrator account in the
fields provided. This password will be required when logging in to the camera’s web-based
configuration interface. Click Next to continue.
•Step 4.6: Using the radio buttons, select how you wish to connect your camera to your
router for normal operation. You can choose to connect using a wired Ethernet connection
(Ethernet cable), using Wi-Fi Protected Setup (WPS), or by selecting an available wireless
network. Click Next to continue.
4.6.1
If you selected Ethernet Cable connection, follow the on-screen instructions to connect your
camera to your router using a wired connection. Once completed, click Next to continue the
wizard.
4.6.2
If you selected By using Wi-Fi Protected Setup (WPS), follow the on-screen instructions to
connect your camera to your wireless router using WPS. Once completed, click Next to
continue the wizard.
Note: Your router must support WPS Push-button Connection (PBC) in order to use this
method.
4.6.3
If you selected By Selecting a Wireless Network, choose an available wireless network from
the drop-down menu. If you do not see your wireless network in the list, click Rescan to
search for wireless networks again. If your network requires a password, enter it in the
Wireless password field. Click Next to continue.
•Step 4.7.1: In order to use the cloud features of your camera, you will need to add it to your
mydlink account. If you do not have a mydlink account, you can create one at this step.
To add the DCS-942L to your existing mydlink account, select Yes, I already have a mydlink
account, then enter your mydlink account username (email address) and password in the
fields provided and click Next.
4.7.2: If you selected No, I want to sign up for a new account, enter the information
required for account registration in the fields provided. Check the box to indicate that you
accept the Terms of Use and Privacy Policy for mydlink cloud services. Click Next to continue.
Otros manuales para DCS-942L
13
Tabla de contenidos
Otros manuales de Cámara IP de D-Link
D-Link
D-Link DHA-390 Manual de usuario
D-Link
D-Link DCS-936L Manual de usuario
D-Link
D-Link SECURICAM Network DCS-2100+ Manual de usuario
D-Link
D-Link SECURICAM Network DCS-2100G Manual de usuario
D-Link
D-Link SECURICAM Network DCS-5300W Manual de usuario
D-Link
D-Link SECURICAM Network DCS-2100 Manual de usuario
D-Link
D-Link DCS-942L Manual del operador
D-Link
D-Link DCS-1130 - mydlink-enabled Wireless N Network... Manual de usuario
D-Link
D-Link DCS-936L Manual de usuario
D-Link
D-Link SECURICAM Network DCS-5300W Manual de usuario
D-Link
D-Link DCS-3420 Manual de usuario
D-Link
D-Link DCS-6620G - Network Camera Manual de usuario
D-Link
D-Link SECURICAM DCS-910 Manual de usuario
D-Link
D-Link DCS-5211L Manual de usuario
D-Link
D-Link DCS-5000L Manual de usuario
D-Link
D-Link DCS-1000 Manual de usuario
D-Link
D-Link DCS-2332L Manual de instalación y operación
D-Link
D-Link DCS-G900 - SECURICAM Wireless G Internet Camera... Manual de usuario
D-Link
D-Link DCS-2630L Manual de usuario
D-Link
D-Link SECURICAM Network DCS-2100+ Manual de usuario
