D-Link DSC-100 Manual de usuario
Review Package Contents
Make sure that the package contains the following items. If any items are
missing, contact the reseller.
§DSC-100
§TWAIN Driver in CD
§3xAAA Alkaline Battery
§Strap
§Cradle
§USB cable
§Quick Start Guide
§MGI Imaging software
§User's manual
TWAIN Driver Installation
The TWAIN driver allows other applications to communicate with the
DSC-100. You must install a TWAIN-compliant application (i.e. the
bundled imaging software) before downloading pictures to your PC.
Note:
Please do not connect the DSC-100 to your computer before installing the
TWAIN driver for the first time. If you have already connected the
DSC-100 to the computer, disconnect the DSC-100 from the USB port,
exit the "Add New Hardware Wizard" and restart the computer.
TWAIN Driver Installation Continued…
Turn on your computer.
Insert the DSC-100 Driver CD into the CD-ROM.
The Autorun screen will appear automatically.
Click on the button labeled “Install TWAIN Driver”
Note: If the Autorun screen does not appear, click on Start and select
Run. In the run dialog box, type "drive:\setup.exe" and click OK.
Where “drive” is the letter of your CD-ROM drive.
Install Batteries and Power On
The DSC-100 receives power from the USB port when connected to the
computer. When used as a digital camera, you must install batteries.
Open the battery chamber cover.
Insert 3xAAA batteries into the
battery chamber and close the cover.
Press and hold "Power" button for 3
seconds to power on the camera.
When using a USB cable:
Connect one end of the USB cable to
the USB port on your computer.
Connect the other end of the USB connector on the camera.
The DSC-100 will turn on automatically when connected to the computer.
Windows will detect and load all necessary drivers when the DSC-100 is
connected to the USB port for the first time.
Note: Windows 2000 users may be prompted by a “Digital Signature”
screen. Click “Yes” on each screen to continue the installation.
Install Imaging Software
Insert the MGI Videowave or MGI Photosuite installation CD into your
CD-ROM drive.
The Autorun program will begin automatically.
Follow the on-screen instructions to install each program.
If the Autorun program does not run, click on Start and select Run. In the
run dialog box, type "drive:\setup.exe" where drive is the letter of your
CD-ROM drive.
Download Digital Photos
Click on Start > Programs > DSC-100 > DSC-100 program.
Download Digital Photos Continued…
The following screen will be shown.
This screen allows you to preview and select which images you would
like to save as a file.
Select the image(s) that you want to save and click the Get Pictures
button.
The following screen will appear.
Download Digital Photos Continued…
Select a folder to save your images to in the Path box.
Click the OK button to download the images.
The files are saved as a JPEG file with an extension of .jpg.
The User’s Manual includes detailed descriptions of the imaging software
and how to download images using a graphics program and the TWAIN
interface.
The DSC-100 as a Webcam
This section describes how to use the DSC-100
using Microsoft’s Netmeeting software.
Open Netmeeting by clicking on Start >
Programs > Accessories > Communications >
Netmeeting.
If this is the first time running Netmeeting, you
will need to go through the setup wizard.
Follow the on-screen instructions until you get
the screen shown to the right.
Press the Play button to display the webcam
preview.
You can call someone to videoconference by pressing the phone button.
Enter the correct IP address for the person you are calling and press
Call.
Tips and Technical Support
§Keep the camera still until the camera is finished taking the picture.
§Use the supplied stand when possible to keep the camera stable.
§The camera works best in well lighted situations.
Caution:
§Do not attempt to service this product. Contact D-Link Technical
Support for instructions on servicing.
§To reduce the risk of fire or electrical shock, do not expose this
product to water or moisture.
§Do not expose this product to direct sunlight or extreme heat.
§Remove the batteries when not in use for extended periods of time.
D-Link Technical Support information is listed below if any problems
arise during installation. Refer to the Troubleshooting guide at the end of
this Quick Installation Guide before calling technical support.
D-Link Technical Support over Telephone:
(949) 790-5290
6 a.m. to 6 p.m. Monday thru Friday
D-Link Technical Support over the Internet:
www.dlink.com
5/18/2001 1:28 PM
D-Link
DIGITAL HOME SOLUTIONS
®
Otros manuales para DSC-100
1
Tabla de contenidos
Otros manuales de Cámara digital de D-Link
D-Link
D-Link DCS-6045L Manual de usuario
D-Link
D-Link DCS-855L Manual de usuario
D-Link
D-Link DCS-2530L Manual de usuario
D-Link
D-Link MyDlink DCS-8515LH Manual de usuario
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual de usuario
D-Link
D-Link EyeOn Manual de usuario
D-Link
D-Link DCS-7000L Manual de usuario
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual de usuario
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual de usuario
D-Link
D-Link DCS-932L Manual de usuario
D-Link
D-Link DCS-6501LH Manual de usuario
D-Link
D-Link DSH-C130 Guía de instalación
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual de usuario
D-Link
D-Link DRU-100C Manual de usuario
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual del propietario
D-Link
D-Link DCS-8350LH Manual de usuario
D-Link
D-Link DCS-5030L Manual de usuario
D-Link
D-Link DCS-6045LKT Manual de usuario
D-Link
D-Link DCS-8300LHV2 Manual de usuario
D-Link
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Manual de usuario
