D-Link PersonalAir DBT-120 Manual de usuario

Rev.2.0 (08/27/2002)

DBTDBT

DBT

-120120

120120

120

Bluetooth USB Adapter

Contents

Introduction.....................................5

Package Contents..............................6

Installing Bluetooth Software ............6

Hardware Installation ........................8

Introduction to Bluetooth Software ....9

Bluetooth Software Basic Operations. 4

Client Applications .........................20

Local Services.................................29

Configuration Panel ........................3

Security .........................................52

Troubleshooting.............................. 56

Introduction

Introduction to BluetoothIntroduction to Bluetooth

Introduction to Bluetooth

The term “Bluetooth” refers to a worldwide standard for the wireless

exchange of data between two devices within a short range. In order to

exchange data, two Bluetooth devices must establish a connection. Before

a connection is established, one device must request a connection with

another, where the second device accepts (or rejects) the connection. The

originator of the request is known as the client. The device that accepts (or

rejects) the request is known as the server. Many Bluetooth devices can act

as both client and server. A client Bluetooth device runs a software program

that requests a connection to another device as part of its normal operation.

For example, the program may request a connection to a remote computer,

a printer, or a modem.

Becoming a Bluetooth client normally requires an action by the device

operator, such as an attempt to browse a remote computer, print a file, or

dial out on a modem. Every Bluetooth device that provides a service must

be prepared to respond to a connection request. Bluetooth software is

always running in the background on the server, ready to respond to

connection requests.

Introduction to the D-Link Bluetooth USB AdapterIntroduction to the D-Link Bluetooth USB Adapter

Introduction to the D-Link Bluetooth USB Adapter

The D-Link Bluetooth USB Adapter is the best solution for quick and easy

access to Bluetooth enabled devices without cables or wires. It is a class 2/

3 low power device. The wireless transmission range of the D-Link Bluetooth

USB Adapter is about 15 Meter (45 feet). APC configured as the Bluetooth

server can support up to 7 Bluetooth client devices with IP addresses auto-

matically assigned whenthey connect.

After finishing the steps outlined in this manual, you will have the ability to

share information, obtain network access and take the full advantage of a

"connected" environment.

Package Contents

After opening the D-Link Bluetooth Adapter package, check what’s in the package,

then refer to the Installation Guide for the fastest way to get up and running with the

Bluetooth USB Adapter.

The following items should be found in the Bluetooth USB Adapter box:

•D-LinkDBT-120Bluetooth USBAdapter

•USB Extension Cable

•Installation CD with Manual & Software

•InstallationGuide

Installing Bluetooth Software

Uninstalling a previous version of Bluetooth software:Uninstalling a previous version of Bluetooth software:

Uninstalling a previous version of Bluetooth software:

If you are installing the Bluetooth software for the first time, please skip this

section.

Any previous versions of the Bluetooth software must be uninstalled before installing

anupgradedversion.

Please uninstall the software by completing these steps:

1) Close any open programs and insert the Driver CD into your CD-ROM Drive.

2) The Autorun screen will appear. Click on Install Bluetooth Software.

3)The Welcome screen informs you the previous version of BTW you have

installed. Click on the Next button to continue.

4) Click on the Remove button from “Remove the Program” screen.

5) When the files have been removed, you will be presented with a screen

informing of its completion.

a.Click on the Finish button, a pop-up dialog box will show on the

screen.

b.Click on the Yes button to reboot your PC.

YouhavenowcompletelyuninstalledthepreviousversionoftheBluetoothsoftware.

Installing the Bluetooth software:Installing the Bluetooth software:

Installing the Bluetooth software:

Be sure to install the Bluetooth software prior to plugging in the USB

Adapter to a USB port. If you have connected the Bluetooth adapter to your

computer, please remove it, cancel any hardware wizards that may show

up, restart your computer and start here.

1) Close any open programs and insert the Driver CD into your CD-ROM Drive.

2)The Autorun screen will appear. Click on Install Bluetooth Software.

3) The Welcome screen informs you that the WIDCOMM Bluetooth Software

Setup program is ready to begin. Click on the Next button.

4) In the License Agreement screen, click on the radio button to the left of I

accept the terms in the license agreement. Click on the Next button.

5) In the Device Information screen:

a. Enter a device name

b. Select a device type

c. Click on the Next button.

6) In the Destination Folder screen you are asked to confirm the Destination

Folder for the application software. If you would like, you may change the

destination folder to another location as the directory. Click on the Next button.

7) The Ready to Install the Program screen informs you that the driver is ready for

installation. Click on the Install button to continue.

Note: Please click on the OK button from the Driver Signature Notice dialog

box to proceed with driver installation in Windows 2000 and XP operating

systems.

8) When the files have been copied, you will be presented with a screen informing

of its completion.

a. Clickon theFinish button,apop-up dialog boxwillshow on thescreen.

b. Click the Yes button to reboot your PC.

9) After you reboot your PC, the Bluetooth Icon will reside in the Windows

system tray.

Hardware Installation

The Bluetooth USB Adapter is plug-&-play. After you have the software installed and

have rebooted your PC, you can plug the Bluetooth USB Adapter directly into your

laptop’s or desktop’s USB port. Or you can plug one end of the USB cable to your

computer and plug the Bluetooth USB Adapter to the other end of the USB cable.

When you plug the USB Adapter to the USB port, the green LED on the USB Adapter

should light up.

You may be prompted by a “Add New Hardware Wizard”, Click “Next” on each screen

with the driver CD in your CD-ROM drive to finalize the installation.

Note: The system will show a series of configuration messages in the Windows

system tray only when you have the software and hardware installed for the first

time. When you unplug and plug the USB Adapter subsequently, the system

won’t show the above bubble messages again.

Introduction to Bluetooth Software

The Bluetooth Software is the solution for the seamless integration of Bluetooth

technology into personal computers. The software provides an easy interface to

manage the Bluetooth Adapter.

Introduction to Bluetooth SoftwareIntroduction to Bluetooth Software

Introduction to Bluetooth Software

Most Bluetooth-enabled devices have the capability to act as:

•A Bluetooth server—these devices provide one or more services, such as

access to the Internet, to other Bluetooth devices.

•A Bluetooth client—these devices use the service(s) provided by Bluetooth

servers.

Bluetooth devices that can act as both server and client can often do both at the

same time.

The Bluetooth software provides:

•Clients with the means:

oTo locate other Bluetooth devices in the immediate vicinity (inquiry)

oDiscover the services that those devices offer (discovery)

oConnect to, use, and disconnect from those services.

•Servers with the means to include/exclude individual services in the list of

services they provide to clients.

•Extensive security, including:

oAuthorization

oAuthentication

oEncryption

The services supported by Bluetooth Software are:

•Bluetooth Serial Port - establishes a Bluetooth wireless connection

between two devices. The connection may be used by applications as

though a physical serial cable connected the devices.

•Dial-up Networking - allows a Bluetooth client to use a modem that is

physically attached to the Bluetooth server.

•Fax - allows a Bluetooth client to wirelessly send a fax using a device that is

physically attached to the Bluetooth server.

•File Transfer - establishes a Bluetooth wireless connection that allows your

computer to perform file system operations on another Bluetooth-enabled

device—browse, drag/drop, open, print, cut/copy, paste, delete, rename,

etc.

•Information Exchange - establishes a Bluetooth wireless connection

between two devices so that they can exchange personal information

manager data such as business cards, calendar items, email messages,

and notes.

•Information Synchronization - establishes a Bluetooth wireless connection

between two devices and uses the connection to synchronize Personal

Information Manager data between the two devices.

•Network Access - establishes a Bluetooth wireless connection between the

client and a server that is physically connected to the Local Area Network. If

the client has permission (user name and password for the LAN), the

wireless connection can be used as if the client were hardwired to the LAN.

Note: All Bluetooth servers do not necessarily provide all of these services.

To determine the services provided by a Bluetooth device:

1. On the client, in the Folders panel of My Bluetooth Places, select Entire

Bluetooth Neighborhood.

2. In the right panel of Entire Bluetooth Neighborhood, right-click anywhere except

on a device name and select Refresh from the pop-up menu.

3. In the Folders panel of My Bluetooth Places, right-click a device and select

Discover Available Services from the pop-up menu to update the available

services list. The available services will be displayed in the right panel of My

Bluetooth Places.

Bluetooth Device IdentityBluetooth Device Identity

Bluetooth Device Identity

Every Bluetooth device has an unique 48-bit binary Bluetooth Device Address (BDA)

burned into its EEPROM (embedded into the device). This address cannot be

changed by the end-user.

A device’s BDA is usually displayed in hexadecimal format; 00:D0:B7:03:2E:9F is a

valid BDA.

Each Bluetooth device also has an operator-configurable, user-friendly name to help

distinguish it from other Bluetooth devices. The user-friendly name may be up to 99

alphanumeric characters in length and may contain spaces. My Personal

Computer is a valid user-friendly name.

Icons Used For Bluetooth Devices and ServicesIcons Used For Bluetooth Devices and Services

Icons Used For Bluetooth Devices and Services

Bluetooth icons provide at-a-glance feedback about a device or service’s status by

changing color.

•Device icons for Windows 98SE, 2K and ME.

Otros manuales para PersonalAir DBT-120

Tabla de contenidos

Otros manuales de Adaptador de D-Link

D-Link

D-Link DWL-122 Manual de usuario

D-Link

D-Link DWB-120M Manual de usuario

D-Link

D-Link AirPlus XTREME G+ DWL-G650+ Manual de usuario

D-Link

D-Link PowerLine DHP-302 Manual de usuario

D-Link

D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manual de usuario

D-Link

D-Link DWA-132 Manual de usuario

D-Link

D-Link DUB-E250 Manual de usuario

D-Link

D-Link DWA-547 Manual de usuario

D-Link

D-Link WNA-2330 - Rangebooster G Cardbus 802.11G... Manual de usuario

D-Link

D-Link DFE-500FX Manual de usuario

D-Link

D-Link Rangebooster G WNA-2330 Manual de usuario

D-Link

D-Link DGE-530T Manual de usuario

D-Link

D-Link DGE-550SX Manual de usuario

D-Link

D-Link DWA-125 Manual de usuario

D-Link

D-Link Powerline AV+ DHP-309AV Manual de usuario

D-Link

D-Link AirPlus DWL-120+ Manual de usuario

D-Link

D-Link PersonalAir DBT-120 Manual de usuario

D-Link

D-Link DWA-110 Manual de usuario

D-Link

D-Link DWL-P200 Manual de usuario

D-Link

D-Link AirPlus G DWL-G650X Manual de usuario

D-Link

D-Link DUB-1370 Manual de usuario

D-Link

D-Link DVG-5112S Manual de usuario

D-Link

D-Link DWA-525 Manual de usuario

D-Link

D-Link DWA-130 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario

RCA

RCA AH57R Manual de usuario