D-Link DVG-2102S Manual de usuario
.
Quick Installation Guide
DVG-2102S
VoIP Telephone Adapter
Check Your Package Contents
DVG-2102S
VoIP TA
CD-ROM
Phone Cord Ether (CAT5
UTP) Cable
12VDC, 1A
Power Adapter
Using a
power
adapter with
a different
voltage rating
will damage
this product
and void the
warranty.
2
Front Panel
Power
Green light indicates a normal power supply. A fast
blinking light indicates the SIP Telephone Adapter is not
registered. A slow blinking light indicates the SIP
Telephone Adapter is communicating with the Auto
Provision Server.
WAN When a connection is established the 10 or 100 LED will
light up solid. The LED will blink to indicate activity. If the
10 or 100 LED does not light up when a cable is
connected, verify the cable connections and make sure
your devices are powered on.
Phone This LED displays the VoIP status and Hook/Ringing
activity on the phone port that is used to connect your
normal telephone(s). If a phone connected to a phone port
is off the hook or in use, this LED will light solid. When a
phone is ringing, the indicator will blink.
Hardware Overview
3
Rear Panel
1. Power Receptor: Receptor for the provided power adapter.
2. WAN: Connect to your broadband modem or your Ethernet enabled
computers using Ethernet cabling.
3. Phone: Connect to your phones using standard phone cabling (RJ-
11).
Hardware Overview (continued)
4
A. Insert one end of the Ethernet cable into the WAN port on the back of
the DVG-2102S and the other into your cable/DSL modem or the
LAN port of your router or an available Ethernet port on your PC.
B. Insert a telephone cable into the Phone port, and then connect the
cable to your telephone.
C. Connect the power adapter to the power input at the back panel of
the DVG-2102S and then plug the other end of the power adapter to
a wall outlet or power strip. On the front of the device, the Power LED
will turn on to indicate proper operation.
D. Check the LED display on the front of the VoIP Telephone Adapter to
confirm that the connections have been made.
Installing the Hardware
5
After the installations are completed, your network should look similar to
the diagram below.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
Installing the Hardware (continued)
6
Configuration
To access the web-based configuration utility, open a web browser such
as Internet Explorer and enter the IP address of the DVG-2102S.
Open your Web browser and
type http://192.168.8.254 into
the URL address box. Press
the Enter or Return Key.
Click Login to enter Web Site.
Click Setup Wizard.
7
Configuration (continued)
The username of ADMIN and USER
have been defined and locked by
default. It is highly recommended to
create a login password to keep
your router secure.
Click Next.
Enter a NTP server or use the
default server Select your time zone
from the drop-down menu. Enable
Daylight Saving for your local time if
required.
Click Next.
Click Next.
8
Configuration (continued)
Select your Internet connection type:
DHCP – Most Cable ISPs or if you
are connecting the DVG-2102S
behind a router.
Static IP – Select if your ISP
supplied you with your IP settings.
PPPoE – Most DSL ISPs.
PPTP/L2TP – Select if required by
your ISP.
Select Manual to manually enter IP
address of DNS or select Auto if
DNS is assigned by ISP.
Click Next.
Register to the SIP Proxy Server by
clicking Enable support of SIP
Proxy Server. Enter Proxy Server
IP/Domain and Port.
The Outbound Proxy Support is
optional. To register, please click on
the Outbound Proxy Support
check box and enter Outbound
Proxy IP/Domain and Port in it.
Registration by phone line: enter
Number, User ID/Account and
Password supplied by your ITSP.
Click on the Register check box to
register to Proxy Server.
Click Next.
9
Configuration (continued)
Setup is finished. Check the
summary of your settings. To make
new settings effective, you must
click on the Restart button to
reboot the DVG-2102S.
Click Restart.
Ver. 1.00(WW)
2008/12/29
Otros manuales para DVG-2102S
2
Tabla de contenidos
Otros manuales de Adaptador de D-Link
D-Link
D-Link DWA-171 Manual de usuario
D-Link
D-Link DHP-328AV Manual de usuario
D-Link
D-Link DHP-209AV Manual de usuario
D-Link
D-Link DFE-690TXD Manual de usuario
D-Link
D-Link AirPlus G DI-524 Manual de usuario
D-Link
D-Link DFE-530TX Manual de usuario
D-Link
D-Link DWA-620 Manual de usuario
D-Link
D-Link DFE-538TX Manual de usuario
D-Link
D-Link PCI-Express X4 Manual de usuario
D-Link
D-Link AirPlus DWL-G120 Manual de usuario
D-Link
D-Link DWA-110 Manual de usuario
D-Link
D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manual de usuario
D-Link
D-Link DHP-W221AV Manual de usuario
D-Link
D-Link DUB-1310 Manual de usuario
D-Link
D-Link DUB-1210 Manual de usuario
D-Link
D-Link DHP-311AV Manual de usuario
D-Link
D-Link AirPro DWL-AB650 Manual de usuario
D-Link
D-Link AirPlus DWL-810 Manual de usuario
D-Link
D-Link DUB-1312 Manual de usuario
D-Link
D-Link DWL-AG132 Manual de usuario
