D-Link DUB-E100 Manual de usuario
D-Link™ DUB-E100
USB 2.0 Fast Ethernet Adapter
Manual
First Edition (June 2007)
Printed in Taiwan
RECYCLABLE
Table of Contents
INTRODUCTION..............................................................3
System Requirements ......................................................3
Features ...........................................................................3
INSTALLATION ...............................................................4
Unpack and Inspect..........................................................4
Installing the Adapter........................................................4
connecting the network cable………………………………3
software installation………………………………………….4
TROUBLESHOOTING...................................................19
SPECIFICATIONS .........................................................23
1
Introduction
Thank you for choosing the D-Link DUB-E100. The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps
Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a
desktop or laptop PC running Microsoft Windows Vista, XP, Server 2003, 2000,ME 98SE ,Mac OS X, and
Linux. Based on USB 2.0, the DUB-E100 extends the transfer speed of earlier USB Fast Ethernet adapters
to true 10/100Mbps connectivity. Power for the DUB-E100 is provided directly by the USB bus, eliminating
the need for an external power adapter. It also supports USB's energy saving suspend and resume
functions to minimize power consumption, which is especially useful for laptop/notebook users.
System Requirements
Before installing the DUB-E100, check your system for the following minimum configuration requirements.
200MHz or above based computer with a minimum of 32MB RAM
One available USB port
Windows Vista x64/86, XP x32/x64 Edition, Server 2003 x32/x64 Edition, 2000, Me, 98SE, Linux or
Mac OS X
Features
Designed for versatility and performance, the DUB-E100 USB 2.0 Fast Ethernet Adapter provides the
following:
•Compliant with USB 2.0 and USB 1.1 specifications
•Universal Bus support 3.3V
•Compliance with IEEE 802.3u Fast Ethernet standards and IEEE 802.3 Ethernet standards.
•Plug-and-Play installation
•Supports half and full duplex at 10Mbps, half and full-duplex at 100Mbps.
•One built-in RJ-45 connector
•Auto-negotiation to the highest available speed
•Two LED indicators: Link/ TX/RX
•Driver support:
√Microsoft Windows Vista (x86 ,x64) √Linux (kernel 2.6.9~13)
√Microsoft Windows XP (x32/x64 Edition) √Linux (kernel 2.6.14 & above)
√Microsoft Windows Server 2003 (x32/x64
Edition)
√Macintosh OSX (10.x)
√Windows 98SE/ME
√Microsoft Windows 2000
1
2
Installation
Unpack and Inspect
Open the shipping carton and carefully remove all items. Ensure that the following items are included:
•One DUB-E100 USB 2.0 Fast Ethernet Adapter
•DUB-E100 Drivers and Manual on CD-ROM
•Quick Installation Guide
If any of these items are missing or damaged, please contact your local reseller for replacement.
Installing the Adapter
Plug the DUB-E100’s USB cable into an available USB port on your computer.
Windows will detect new hardware and prompt you for the drivers. The installation process varies slightly for
each operating system. Insert the DUB-E100 CD into your CD-ROM drive. Then proceed to the appropriate
installation section on the following pages for your operating system.
2
Connecting the Network Cable
A. Attach an Ethernet cable to the Ethernet port on the DUB-E100.
B. Attach the other end of the Ethernet cable to your network switch, hub, or router.
3
Software Installation
Insert the DUB-E100 CD into your CD-ROM drive. Then proceed to the appropriate installation section
on the following pages for your operating system.
Windows Vista x64/86
Windows Vista driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
4
Software Installation (continued)
Windows XP
For Windows XP 64 Edition
For Windows XP 32 Edition
5
Software Installation (continued)
Windows XP driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
Windows 2000
6
Software Installation (continued)
7
Software Installation (continued)
Windows 2000 driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
Windows 2003
For Windows Server 2003 x64 Edition
8
Otros manuales para DUB-E100
13
Tabla de contenidos
Otros manuales de Adaptador de D-Link
D-Link
D-Link DFE-500TX ProFAST 10/100 Manual de usuario
D-Link
D-Link DGE-550SX Manual de usuario
D-Link
D-Link DWA-192 Manual de usuario
D-Link
D-Link DWA-182 Manual de usuario
D-Link
D-Link DVG-2101S Manual de usuario
D-Link
D-Link GO-PL-200 Manual de usuario
D-Link
D-Link PersonalAir DBT-120 Dimensiones
D-Link
D-Link G120 - DNS NAS Server Manual de usuario
D-Link
D-Link Air DWL-120 Manual de usuario
D-Link
D-Link AirPlus DWL-120+ Manual de usuario
D-Link
D-Link AirPremier AG DWL-AG660 Manual de usuario
D-Link
D-Link dlinkgo GO-USB-N150 Manual de usuario
D-Link
D-Link D DPH-50U DPH-50U Manual de usuario
D-Link
D-Link DBT-122 Manual de usuario
D-Link
D-Link DWA-132 Manual de usuario
D-Link
D-Link Powerline AV+ DHP-309AV Manual de usuario
D-Link
D-Link DVG-2102S Manual de usuario
D-Link
D-Link DUB-E250 Manual de usuario
D-Link
D-Link DGE-530T Manual de usuario
D-Link
D-Link AirPro DWL-A650 Manual de usuario
