Cypress CapSense CY3280-MB Manual de usuario

CY3280-MBR QUICK START GUIDE

CAPSENSE®MECHANICAL BUTTON REPLACEMENT (MBR)

• Turn off and turn on the kit by touching the

power button twice.

• Touch any button; the corresponding LED

will glow.

• Touch the same button again; the corresponding

LED toggles off.

• Repeat with different buttons.

• Insert the provided batteries into the battery

holder on the reverse of the kit.

• Keep the kit on a stable surface and touch the

power button*; the power LED will glow.

• Ensure SW1 is in the Toggle On position and

SW2 is in the Sleep Off position.

• Add parasitic capacitance to BTN2 by inserting

the provided 22 pF external capacitor to

connector J5, with the marking facing up.

• Turn off and turn on the kit by touching the

power button twice.

• Test BTN 2; SmartSenseTM Auto-tuning

compensates for the change in capacitance.

• Repeat with other external capacitors; BTN 2

works with up to 40 pF of parasitic capacitance.

Note* : The power button is set to be less responsive than the other buttons to prevent false starts of the kit.

Once the kit is powered on, the power button is more sensitive to enable easy power cycling.

• Remove the external capacitor.

• Place the 1 mm overlay over the buttons.

• Turn off and turn on the kit by touching the

power button twice.

• Test the buttons; SmartSense Auto-tuning

compensates for the change in

overlay thickness.

• Repeat with the 3 mm overlay.

1 2

CY3280-MBR QUICK START GUIDE

• Power may be supplied in 3 ways: through the on-board battery supply, connector J2 or connector J5.

Recommended power through J2 is 2 V to 3.8 V.

• It is not recommended to connect power to connector J5 when the kit is powered from connector J2

or the battery.

• BTN1 and BTN2 are connected to pins 4 and 5 of connector J5 for SmartSense evaluation;

touching these pins may trigger false touches.

Pin 1 – SCANRATE/SLEEP

Pin 2 – XRES

Pin 3 – DELAY

Pin 4 – TOGGLE/FSS

Pin 5, 6 – GND

Pin 7 – GPO0

Pin 8 – GPO1

Pin 9 – GPO2

Pin 10 – GPO3

Pin 33 – ARST

Pin 35,36,39 – GND

Pin 41 – VDD

Pin 34,37,38,40,42 – NC

Pin 1 – VDD

Pin 2 – GND

Pin 3 – XRES

Pin 4 – Button Sensor BTN1

Pin 5 – Button Sensor BTN2

• *FSS stands for Flanking Sensor Suppression, a CapSense technique that ensures only the

rst button touched is registered.

• Power must be cycled whenever a switch setting is changed.

• For more information about the connector pins, switch features and potentiometers,

please refer the User Guide.

For the latest information about this Kit, and to download the User Guide, Kit Software and Hardware les,

visit: www.cypress.com/go/CY3280-MBR

SW1 Position

Both On ON ON

ON OFF

OFF ON

OFF OFF

Toggle On

FSS On

Both Off

Sleep Off Using pin 1 in connector J1, an external host

controller can enable the deep sleep mode.

Sleep On Deep sleep mode cannot be enabled by an

external host controller using pin 1 in connector J1.

ScanRate/Sleep input of CapSense® controller is

controlled by the SLEEP Potentiometer.

Toggle FSS* Feature

SW2 Position

Connector J2

Power Button

Buttons

and LEDs

SW2 (Sleep)

Connector J5

SW1

(FSS/Toggle)

Connector J1

Battery Holder

Potentiometers

All trademarks or registered trademarks referenced herein are the properties of their

respective owners. Doc.#: 001-64773 Rev.*F

CAPSENSE®MECHANICAL BUTTON REPLACEMENT (MBR)

Connector J1 Connector J2 Connector J5

Otros manuales de Controladores de Cypress

Cypress

Cypress CapSense CY3280-24x94 Manual de usuario

Cypress

Cypress EZ-USB FX3 Manual del producto

Cypress

Cypress CX3 ISP 13MP RDK Manual de usuario

Cypress

Cypress EZ-USB Series 2100 Manual de usuario

Cypress

Cypress CY3280-20x66 Universal CapSense Manual de usuario

Cypress

Cypress AN204772 Manual de usuario

Cypress

Cypress CY8C20xx7/S CapSense Series Guía

Cypress

Cypress EZ-USB CX3 Manual del producto

Cypress

Cypress CY3280-20x66 Universal CapSense Manual de usuario

Cypress

Cypress EZ-PD BCR Manual de usuario

Cypress

Cypress CapSense Express CY8CMBR3108 Manual del producto

Cypress

Cypress PowerPSoC CY3268 Manual de usuario

Cypress

Cypress FX2LP Manual de usuario

Cypress

Cypress CY82C599 Manual de usuario

Cypress

Cypress FM3 S6E1A1 Series Manual de usuario

Cypress

Cypress CY3280-BK1 Manual de usuario

Cypress

Cypress FR81S Series Manual de usuario

Cypress

Cypress CY7C63001 Manual de usuario

Cypress

Cypress PSoC 4100S Plus Manual de usuario

Cypress

Cypress CY7C68013 Manual de usuario

Cypress

Cypress F2MC-8FX Series Manual de usuario

Cypress

Cypress CY4532 EZ-PD CCG3PA Manual de usuario

Cypress

Cypress CapSense CY3280-24x94 Manual de usuario

Cypress

Cypress PowerPSoC CY3268 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario