Cypress Semiconductor CY8CKIT-062S2-43012 Manual de usuario

CY8CKIT-062S2-43012

PSoC 62S2 Wi-Fi BT Pioneer Kit Guide

Doc. # 002-28109 Rev. *E

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

www.cypress.com

Copyrights

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 2

Copyrights

and its subsidiaries (“Cypress”). This document, including any software or firmware included or referenced in this document

(“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries

worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this

paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is

not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use

of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to

sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and

reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to

distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and

distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are

infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for

use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is

prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress

hardware or software products, Cypress shall have no liability arising out of any security breach, such as unauthorized access

to or use of a Cypress product. CYPRESS DOES NOT REPRESENT, WARRANT, OR GUARANTEE THAT CYPRESS

PRODUCTS, OR SYSTEMS CREATED USING CYPRESS PRODUCTS, WILL BE FREE FROM CORRUPTION, ATTACK,

VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (collectively,

“Security Breach”). Cypress disclaims any liability relating to any Security Breach, and you shall and hereby do release

Cypress from any claim, damage, or other liability arising from any Security Breach. In addition, the products described in

these materials may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document

without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit

described in this document. Any information provided in this document, including any sample design information or

programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly

design, program, and test the functionality and safety of any application made of this information and any resulting product.

“High-Risk Device” means any device or system whose failure could cause personal injury, death, or property damage.

Examples of High-Risk Devices are weapons, nuclear installations, surgical implants, and other medical devices. “Critical

Component” means any component of a High-Risk Device whose failure to perform can be reasonably expected to cause,

directly or indirectly, the failure of the High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole

or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a

Cypress product as a Critical Component in a High-Risk Device. You shall indemnify and hold Cypress, its directors, officers,

employees, agents, affiliates, distributors, and assigns harmless from and against all claims, costs, damages, and expenses,

arising out of any claim, including claims for product liability, personal injury or death, or property damage arising from any

use of a Cypress product as a Critical Component in a High-Risk Device. Cypress products are not intended or authorized for

use as a Critical Component in any High-Risk Device except to the limited extent that (i) Cypress’s published data sheet for

the product explicitly states Cypress has qualified the product for use in a specific High-Risk Device, or (ii) Cypress has given

you advance written authorization to use the product as a Critical Component in the specific High-Risk Device and you have

signed a separate indemnification agreement.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-

RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more

complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their

respective owners.

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 3

Contents

Safety and Regulatory Compliance Information 5

1. Introduction 8

1.1 Kit Contents .................................................................................................................9

1.2 Getting Started...........................................................................................................10

1.3 Board Details .............................................................................................................10

1.4 Additional Learning Resources..................................................................................16

1.5 Technical Support......................................................................................................16

1.6 Documentation Conventions......................................................................................16

1.7 Acronyms...................................................................................................................17

2. Kit Operation 19

2.1 Theory of Operation...................................................................................................19

2.2 KitProg3: On-Board Programmer/Debugger..............................................................24

2.2.1 Programming and Debugging using ModusToolbox ......................................24

2.2.2 USB-UART Bridge..........................................................................................28

2.2.3 USB-I2C Bridge..............................................................................................29

3. Hardware 30

3.1 Schematics ................................................................................................................30

3.2 Hardware Functional Description...............................................................................30

3.2.1 CY8CMOD-062S2-43012 (MOD1).................................................................30

3.2.2 PSoC 5LP-based KitProg3 (U2).....................................................................35

3.2.3 Serial Interconnection between PSoC 5LP and PSoC 6 MCU ......................36

3.2.4 Serial Interconnection Between PSoC 5LP and CYW43012 .........................37

3.2.5 Power Supply System ....................................................................................37

3.2.6 I/O Headers....................................................................................................40

3.2.7 CapSense Circuit ...........................................................................................41

3.2.8 LEDs ..............................................................................................................42

3.2.9 Push Buttons..................................................................................................43

3.2.10 Cypress Quad SPI NOR Flash.......................................................................43

3.2.11 Cypress Quad SPI F-RAM .............................................................................44

3.2.12 microSD card section .....................................................................................44

3.2.13 PSoC 6 USB Section .....................................................................................45

3.2.14 Potentiometer Section....................................................................................45

3.3 PSoC 62S2 Wi-Fi BT Pioneer Kit Rework .................................................................46

3.3.1 CapSense Shield ...........................................................................................46

3.3.2 ETM Trace Header.........................................................................................46

3.3.3 microSD Card Detect Multiplexing .................................................................46

3.3.4 microSD Card SPI Multiplexing......................................................................47

3.3.5 U.FL (UMCC) Connector for External Antenna ..............................................47

3.3.6 U.FL (UMCC) Connector for Antenna Diversity..............................................47

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 4

Contents

3.4 Bill of Materials ..........................................................................................................48

3.5 Frequently Asked Questions......................................................................................48

Revision History 50

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 5

Safety and Regulatory Compliance

Information

The CY8CKIT-062S2-43012 PSoC® 62S2 Wi-Fi BT Pioneer Kit is intended for development

purposes only. Users are advised to test and evaluate this kit in an RF development environment.

This kit is not a finished product and when assembled may not be resold or otherwise marketed

unless all required authorizations are first obtained. Contact [email protected] for details.

The CY8CKIT-062S2-43012, as shipped from the factory, has been verified to meet with the

requirements of CE as a Class A product.

PSoC 62S2 Wi-Fi BT Pioneer Boards contain electrostatic discharge

(ESD)- sensitive devices. Electrostatic charges readily accumulate on

the human body and any equipment, which can cause a discharge

without detection. Permanent damage may occur on devices

subjected to high-energy discharges. Proper ESD precautions are

recommended to avoid performance degradation or loss of

functionality. Store unused PSoC 62S2 Wi-Fi BT Pioneer Boards in the

protective shipping package.

End-of-Life/Product Recycling

The end-of-life cycle for this kit is five years from the date of

manufacture mentioned on the back of the box. Contact your nearest

recycler to discard the kit.

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 6

General Safety Instructions

ESD Protection

ESD can damage boards and associated components. Cypress recommends that you perform

procedures only at an ESD workstation. If an ESD workstation is unavailable, use appropriate ESD

protection by wearing an anti-static wrist strap attached to a grounded metal object.

Handling Boards

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit is sensitive to ESD. Hold the board only by

its edges. After removing the board from its box, place it on a grounded, static-free surface. Use a

conductive foam pad, if available. Do not slide the board over any surface.

Regulatory Compliance Information

The CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit contains devices that transmit and

receive radio signals in accordance with the spectrum regulations for the 2.4-GHz and 5-GHz

unlicensed frequency range.

Cypress Semiconductor Corporation has obtained regulatory approvals for this kit to be used in

specific countries. These countries include the United States (FCC Part 15), Canada (IC RSS210),

and Japan (JRF/TELEC). Additional regional regulatory agency approval may be required to operate

these throughout the world.

This kit, as shipped from the factory, has been tested and found to comply with the limits and

requirements for the following compliances:

■As a Class B digital device, pursuant to part 15 of the FCC Rules.

■As a Class B digital apparatus, compliant with Canadian ICES-003.

CAUTION:

Only the antenna(s) that were certified with the module may be used.

Other antennas may be used only if they are of the same type and have

the same or lower gain.

The manufacturer is not responsible for any radio or television

interference caused by unauthorized modifications to this equipment.

Such modifications could void the user's authority to operate the

equipment.

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 7

Regulatory Statements and Product Labeling

United States (FCC)

The CY8CKIT-062S2-43012 contains Type1LV modular transmitter that complies with Part 15 of the

Federal Communications Commission (FCC) Rules.

The FCC ID for this device is VPYLBEE59B1LV.

Operation is subject to the following two conditions:

■This device may not cause harmful interference

■This device must accept any interference received, including interference that may cause unde-

sired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. The antennas for this

transmitter must be installed to provide a separation distance of 20 cm from all persons and must not

be co-located or operating in conjunction with any other antenna or transmitter.

Canada (IC)

This device complies with the Industry Canada license-exempt RSS standard(s). Operation is sub-

ject to the following two conditions:

■This device may not cause interference.

■This device must accept any interference, including interference that may cause undesired oper-

ation of the device.

This equipment complies with radio frequency exposure limits set forth by Industry Canada for an

uncontrolled environment. This equipment should be installed and operated with minimum distance

20 cm between the device and the user or bystanders.

CAUTION: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Contains IC: 772C-LBEE59B1LV

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit

pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par Industrie

Canada pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un

minimum de 20cm de distance entre le dispositif et l'utilisateur ou des tiers.

Contains IC: 772C-LBEE59B1LV

Japan (TELEC)

Manufactured by Murata Manufacturing

001-P01338

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 8

1. Introduction

Thank you for your interest in the CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit. The

PSoC 62S2 Wi-Fi BT Pioneer Kit enables you to evaluate and develop your applications using the

PSoC 62 Series MCU (hereafter called “PSoC 6 MCU”) and CYW43012 WICED Wi-Fi/BT combo

device.

PSoC 6 MCU is Cypress’ latest, ultra-low-power PSoC specifically designed for wearables and IoT

products. PSoC 6 MCU is a true programmable embedded system-on-chip, integrating a 150-MHz

Arm® Cortex®-M4 as the primary application processor, a 100-MHz Arm Cortex-M0+ that supports

low-power operations, up to 2 MB Flash and 1 MB SRAM, Secure Digital Host Controller (SDHC)

supporting SD/SDIO/eMMC interfaces, CapSense® touch-sensing, and programmable analog and

digital peripherals that allow higher flexibility, in-field tuning of the design, and faster time-to-market.

The PSoC 6 BLE Pioneer Board offers compatibility with Arduino™ shields. The board features a

PSoC 6 MCU, and a CYW43012 Wi-Fi/Bluetooth combo module. Cypress CYW43012 is a 28-nm,

ultra-low-power device that supports single-stream, dual-band IEEE 802.11n-compliant Wi-Fi MAC/

baseband/radio and Bluetooth 5.0 BR/EDR/LE. The WLAN section supports SDIO interface to the

host MCU (PSoC 6 MCU), and the Bluetooth section supports high-speed 4-wire UART interface to

the host MCU. In addition, the board features an onboard programmer/debugger (KitProg3), a

512-Mbit Quad SPI NOR flash, a 4-Mbit Quad SPI F-RAM, a micro-B connector for USB device

interface, a 5-segment CapSense slider, two CapSense buttons, a microSD card holder, an RGB

LED, two user LEDs, one potentiometer, and two push buttons. The board supports operating

voltages from 1.8 V to 3.3 V for PSoC 6 MCU.

You can use ModusToolbox™ to develop and debug your PSoC 6 MCU projects. ModusToolbox

software is a set of tools that enable you to integrate Cypress devices into your existing development

methodology.

If you are new to PSoC 6 MCU and ModusToolbox IDE, refer to the application note AN221774 -

Getting Started with PSoC 6 MCU to help you familiarize with the PSoC 6 MCU and help you create

your own design using the ModusToolbox IDE.

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 9

Introduction

1.1 Kit Contents

The CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit has the following contents, as shown

in Figure 1-1.

■PSoC 62S2 Wi-Fi BT Pioneer Board

■USB Type-A to Micro-B cable

■Four jumper wires (4 inches each)

■Two jumper wires (5 inches each)

■Quick Start Guide

Figure 1-1. Kit Contents

Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office

for help: www.cypress.com/support.

CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E 10

Introduction

1.2 Getting Started

This guide will help you get acquainted with the PSoC 62S2 Wi-Fi BT Pioneer Kit:

■The Kit Operation chapter on page 19 describes the major features of the PSoC 62S2 Wi-Fi BT

Pioneer Kit and functionalities such as programming, debugging, and the USB-UART and USB-

I2C bridges.

■The Hardware chapter on page 30 provides a detailed hardware description, methods to use the

onboard NOR flash, kit schematics, and the bill of materials (BOM).

■Application development using PSoC 62S2 Wi-Fi BT Pioneer Kit is supported in various

development ecosystems such as ModusToolbox and Mbed OS. For the latest software support

for this development kit including the different development ecosystems, refer to the kit webpage.

❐ModusToolbox software is a free development ecosystem that includes the ModusToolbox

IDE. Using ModusToolbox IDE, you can enable and configure device resources, middleware

libraries, and program and debug the device. You can download the software from the

ModusToolbox home page. See the ModusToolbox User Guide for additional information.

❐Mbed OS: Visit Cypress’ Mbed OS page on instructions to develop applications on Cypress’

target board on the Mbed OS platform.

■There are wide range of code examples to evaluate the PSoC 62S2 Wi-Fi BT Pioneer board.

These examples help you familiarize PSoC 6 MCU and create your own design. These examples

are available in various development ecosystems such as ModusToolbox IDE and Mbed OS.

Visit Cypress’ code example page to access examples for the following development

ecosystems:

❐ModusToolbox based examples

❐Mbed OS based examples

1.3 Board Details

The PSoC 62S2 Wi-Fi BT Pioneer Board that has the following features:

■ CY8CMOD-062S2-43012 carrier module that contains

❐PSoC 6 MCU (CY8C624ABZI-S2D44)

❐Murata 1LV ultra-small 2.4/5.0-GHz WLAN and Bluetooth functionality module based on

CYW43012

■512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and

code

■4-Mbit Quad SPI ferroelectric random-access memory (F-RAM)

■KitProg3 onboard SWD programmer/debugger with USB-UART and USB-I2C bridge functionality

■CapSense touch-sensing slider (5 elements), two buttons, based on self-capacitance (CSD) and

mutual-capacitance (CSX) sensing

■A micro-B connector for USB device interface for PSoC 6 MCU

■1.8 V and 3.3 V operation of PSoC 6 MCU is supported

■Two user LEDs, an RGB LED, two user buttons, and a reset button for PSoC 6 MCU

■A potentiometer

■One Mode selection button and one Status LED for KitProg3

■A microSD Card holder

Otros manuales para CY8CKIT-062S2-43012

Tabla de contenidos

Otros manuales de Microcontrolador de Cypress Semiconductor

Cypress Semiconductor

Cypress Semiconductor CY3280-MBR3 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-062S2-43012 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor enCoRe CY7C604XX Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CapSense CY8CKIT-024 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-062S2-43012 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-049-4 Series Manual de usuario

Cypress Semiconductor

Cypress Semiconductor enCoRe II Manual de usuario

Cypress Semiconductor

Cypress Semiconductor PSoC 4100S Manual de usuario

Cypress Semiconductor

Cypress Semiconductor GX3 EEPROM Instrucciones de montaje

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-015 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY3655-EXT enCoRe II Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-062-WiFi-BT Manual de usuario

Cypress Semiconductor

Cypress Semiconductor enCoRe CY7C601xx Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-042-BLE Manual de usuario

Cypress Semiconductor

Cypress Semiconductor EZ-USB FX2LP Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-042 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor EZ-USB GX3 CY4701 Guía

Cypress Semiconductor

Cypress Semiconductor MoBL-USB CY7C68053 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CYUSBS232 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY4501 CCG1 DVK Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-064B0S2-4343W Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY3215-DK Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CYW4343W Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario